Zooz Z-Wave Universal Relay

Description: ZOOZ Z-WAVE PLUS 700 SERIES UNIVERSAL RELAY ZEN17 WITH 2 NO & NC RELAYS (20A, 10A) PRODUCT HIGHLIGHTS 2 NO or NC relays to turn almost any load into a Z-Wave device (use either the normally closed or normally open relay for R1 and R2 at a time) 2 Dry Contact or 12-24 V inputs to monitor HVAC systems, magnetic door sensors, or analog leak alarms (use either dry contact or 12-24 V input for R1 and R2 at a time, never apply voltage to the Sw terminals) Automate up / down DC motors in screens, awnings, motorised blinds Control sprinkler systems, commercial gates, garage doors (will NOT work with MyQ or other smart openers), pool pumps, whole-house fans, landscape lighting, and more 700 Series Chip: stronger signal repeater and S2 Authenticated security for a more reliable network than ever Powered by USB C or 12-24 V (AC/DC): power supply NOT included Use optional wall switches for manual control of connected devices Wall-mount ready 5-year warranty and lifetime tech support NOTE: Z-Wave gateway controller required - sold separately. GET POWER SUPPLY DC:OR USB: INSTALLATION Follow the appropriate diagram to wire the Universal Relay according to your application. If you don't see a diagram describing your set-up, please contact us to request help with the installation. Remember to always turn power off at the breaker before handling the wires. Never apply any voltage to the Sw input terminals! Once you've completed the wiring, power the Universal Relay up with a USB C and a standard power adaptor (sold separately) or a direct connection to 12 / 24 V power source. Now add the Universal Relay to your hub: initiate inclusion (pairing mode) and click the Z-Wave button on the device 3 times quickly. The LED indicator will blink to indicate communication and stay on for 2 seconds to confirm inclusion. You'll most likely see 3 new on/off devices in your app: 2 channels for on/off control of each relay 1 master node to control all relays at the same time and to access and adjust advanced settings in (if your hub supports parameter input) WORKS WITH ADT Pulse (no advanced settings) Ezlo Plus Fibaro Home Center 2 Fibaro Home Center Lite Home Assistant (Z-Wave JS) HomeSeer (3.0.6.0 release or higher) Hubitat (2.2.6 release or higher) Indigo ISY SmartThings (custom device handler required) VeraEdge Z-Wave Gateway Controller (input type adjustment not supported, limited functionality) VeraPlus Z-Wave Plus Advanced Home Controller (input type adjustment not supported, limited functionality) VeraSecure Z-Wave Plus Advanced Smart Home Security Controller (input type adjustment not supported, limited functionality) NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product. SPECIFICATIONS Z-Wave Signal Frequency: 921.42 MHz Power: 12 - 24 V / USB C Maximum Load: NO relays: 20 A, NC Relays: 10 A Range: Up to 350 feet line of sight Installation and Use: Indoor Only Operating Temperature: 32-104o F (0-40o C) Dimensions: 4" x 2.5" x 1.5" RESOURCES Zooz Z-Wave Plus 700 Series S2 Universal Relay Manual (PDF) Zooz Z-Wave Universal Relay ZOOZ Z-WAVE PLUS 700 SERIES UNIVERSAL RELAY ZEN17 WITH 2 NO & NC RELAYS (20A, 10A) PRODUCT HIGHLIGHTS 2 NO or NC relays to turn almost any load into a Z-Wave device (use either the normally closed or normally open relay for R1 and R2 at a time) 2 Dry Contact or 12-24 V inputs to monitor HVAC systems, magnetic door sensors, or analog leak alarms (use either dry contact or 12-24 V input for R1 and R2 at a time, never apply voltage to the Sw terminals) Automate up / down DC motors in screens, awnings, motorised blinds Control sprinkler systems, commercial gates, garage doors (will NOT work with MyQ or other smart openers), pool pumps, whole-house fans, landscape lighting, and more 700 Series Chip: stronger signal repeater and S2 Authenticated security for a more reliable network than ever Powered by USB C or 12-24 V (AC/DC): power supply NOT included Use optional wall switches for manual control of connected devices Wall-mount ready 5-year warranty and lifetime tech support NOTE: Z-Wave gateway controller required - sold separately. GET POWER SUPPLY DC:OR USB: INSTALLATION Follow the appropriate diagram to wire the Universal Relay according to your application. If you don't see a diagram describing your set-up, please contact us to request help with the installation. Remember to always turn power off at the breaker before handling the wires. Never apply any voltage to the Sw input terminals! Once you've completed the wiring, power the Universal Relay up with a USB C and a standard power adaptor (sold separately) or a direct connection to 12 / 24 V power source. Now add the Universal Relay to your hub: initiate inclusion (pairing mode) and click the Z-Wave button on the device 3 times quickly. The LED indicator will blink to indicate communication and stay on for 2 seconds to confirm inclusion. You'll most likely see 3 new on/off devices in your app: 2 channels for on/off control of each relay 1 master node to control all relays at the same time and to access and adjust advanced settings in (if your hub supports parameter input) WORKS WITH ADT Pulse (no advanced settings) Ezlo Plus Fibaro Home Center 2 Fibaro Home Center Lite Home Assistant (Z-Wave JS) HomeSeer (3.0.6.0 release or higher) Hubitat (2.2.6 release or higher) Indigo ISY SmartThings (custom device handler required) VeraEdge Z-Wave Gateway Controller (input type adjustment not supported, limited functionality) VeraPlus Z-Wave Plus Advanced Home Controller (input type adjustment not supported, limited functionality) VeraSecure Z-Wave Plus Advanced Smart Home Security Controller (input type adjustment not supported, limited functionality) NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product. SPECIFICATIONS Z-Wave Signal Frequency: 921.42 MHz Power: 12 - 24 V / USB C Maximum Load: NO relays: 20 A, NC Relays: 10 A Range: Up to 350 feet line of sight Installation and Use: Indoor Only Operating Temperature: 32-104o F (0-40o C) Dimensions: 4" x 2.5" x 1.5" RESOURCES Zooz Z-Wave Plus 700 Series S2 Universal Relay Manual (PDF) SHIPPING RETURNS PAYMENT SHIPPINGWe use Australia Post! Items are typically shipped the same if ordered before 11am or the following day from our warehouse in Sydney, Brisbane or Melbourne. You can choose:Free shipping if over a certain value using SendleAustralia Post Standard $9.99Australia Post Express $15Startrack Premium for $20.New Zealand we charge a flat rate of $23International shipping we charge $50.For shipping times please refer to the Australia Post website.We cannot guarantee delivery times as the operations of couriers are not within our control. Delivery times change depending on the time of year and the courier's website should be consulted for reference. We ship most of the orders from Melbourne.We are committed to being a sustainable company and always choose the most sustainable ways of running the business this is why we have chosen a carbon neutral delivery service and we only use satchels that are biodegradable or recycled cardboard boxes. DO NOT leave messages to couriers as we cannot guarantee any messages will be accepted and followed by them. FAULTY ITEMSAll our products carry a 12-month guarantee if you have any problems with any of our goods within the guarantee period.Please get in touch with us to apply for a refund or exchange.support@ozsmartthings.com.au Payments are due Immediatly ABOUT OUR COMPANY Since 2017, we have been working to create a platform that brings Australians the best range of products in the Home Automation ever innovating field. We love how technology can transform our daily lives, and this market will have as many users as smartphones in the future. We are excited to be part of the beginning of Australia's path down that road! © Copyright 2017

Price: 90.49 AUD

Location: Bli Bli

End Time: 2024-09-12T10:47:44.000Z

Shipping Cost: 13.22 AUD