Zooz 700 Series Z-Wave Long Range Smart Relay ZEN51

Description: NOTE: Check Wattage first: DON'T exceed 150 W of LEDs or 960 W incandescent. Use with small fans under 1/2 hp only. NEUTRAL WIRE REQUIRED. SPECIFICATIONS: Model Number: ZEN51 Z-Wave Region: US/CA/MX Power: 110-120 V AC, 60 Hz 960 W incandescent, 150 W LED bulbs, 10 A resistive, 1/2 HP fan motors (don't use with tube lights or switched receptacles) Z-Wave Range: Up to 300 feet line of sight (1300 feet with Z-Wave Long Range enabled) Dimensions: 1.5" tall, 1.4" wide, 0.7" deep Operating Temperature: 32-104° F (0-40° C) Installation and Use: Indoor only Will it work with my smart speaker Smart speakers are not Z-Wave controllers so you will need a Z-Wave hub to control this device with voice commands. Smart speaker Z-Wave hubs include: Z-Box Hub with SmartThings Home Assistant (Z-Wave JS) HomeSeer Hubitat SMART RELAY FOR ON/OFF CONTROL: Install this relay to add Z-Wave to the existing wall switch and keep your favorite switch style and color. The relay output is dry for your unique applications outside of lighting but note the input (switch) requires 120 V which makes it perfect for 120 V signal monitoring on sump pumps or motion lights. For a dry input device, look up ZEN16. 3-WAY : Unlike many other smart relays, you can use this device to automate 3-way set-ups as well. Even if you don't have neutral available at any of the switch boxes, you can always install this relay at the light fixture where you'll have access to power and neutral. Always the wiring diagrams carefully and make any programming changes if needed when installing this relay. EASY INSTALLATION: Pigtail wires for convenient connections. Connect to mechanical on/off or momentary switches only (NO dimmers or electronic / smart switches). The relay is small enough to fit in the most crowded box, just 1.5" x 1.4" and 0.7" deep. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards. SMART BULB MODE AND MORE: Bring back the switch function to your old switches even when using smart bulbs. The smart bulb mode allows you to control smart bulbs via Z-Wave without cutting power to them when off. Enjoy the new 700 series Z-Wave with powerful features like Z-Wave Long Range, SmartStart, and S2 authenticated . Your hub or home automation softwarre needs to support this functionality as well. HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an updated Z-Wave hub to display correctly. All Zooz devices work best with the Z-Box Hub. It was tested to work well with Hubitat, Home Assistant (Z-Wave JS), HomeSeer and is with SmartThings. This product is backed by US based support from Zooz, 7 days a week and a 5-year once registered.

Price: 48.44 USD

Location: Bloomfield, Connecticut

End Time: 2024-11-27T18:01:07.000Z

Shipping Cost: 0 USD