Yottamaster Dual-Bay M.2 NVMe Offline Clone Docking Station USB 3.1 GEN 2 PCI-E

Description: HomePaymentShippingReturn PolicyAbout UsContact UsFeedback 【M.2 SSD NVMe Cloner】Yottamaster newest stand-alone offline clone m.2 docking station duplicator supports all sizes of M.2 NVMe SSDs. Duplicate up to 2 NVMe SSDs At Once and no need to connected to PC. With copy speeds of up to 20GB/min, this SSD Offline Cloner is a fast and cost-effective duplication system that perfect for users looking to upgrade their PCs with the high-Performance NVMe technology. 【Easy to Use, Fast Clone】This nvme drive duplicator is easier to use than you think. No need to connect PC. Just follow the instructions to complete the installation→ Connect power supply→ Power on the device while holding the "start" button(keep holding "start" button 15-20s), you'll see four lights are on and then off, then 25% of the progress light is flashing. You can release the start button. According to our test, 256GB → 256GB NVMe SSD can be copied in about 9 minutes. 【It's a SSD Cloner, also a Dual Bay NVMe Enclosure】This dual bay nvme docking Station can expand up to 8TB storage space for your laptop. This 2 bay nvme dock adopts USB3.1 GEN 2 10Gbps protocol, can reach up to 1012MB/s(from our test). Compatible with Windows/Mac/Linux systems. Both USBA-USBC and USBC-USBC cables are included. Recommend that connacted it to the PCs with USB3.2 GEN 2 ports using the C-C cable to get the fastest speed. 【Outstanding Heat Dissipation Performance】The nvme duplicator drive enclosure is all-aluminum design, unique cube design showing off personalization. Two built-in silicone cooling pads help heat conduction faster. 【5V 4A External Power Supply】Powerful external power supply ensures the safety and stability of the device. Equipped with FIVE worldwide plug adapters(CN, US, EU, UK, JP), let you take and use it anywhere all over the world. Lifetime tech support and 18-month warranty provided. Yottamaster Y-Hypercube Series (HC1) Ultra-Fast Dual Bay NVMe Docking Station Adopt USB3.1 GEN2(10GBPS) PROTOCOL, it provides an convenient and efficient solution for your work demands.The M.2 SSD duplicator can help you a lot, like sometimes you want to upgrade the M.2 SSD to a larger hard drive if it is too small to hold more new and necessary programs.Or you plan to replace the current M.2 SSD drive with a good hard drive when the original SSD drive is failing and not working as normal.May Look to keep a backup handy for effortless data recovery after something bad happens to the M.2 SSD drive. ImportantThe M.2 drive will generate a lot of heat during the cloning process, and the aluminum casing will become relatively hot. This is a normal phenomenon, please don't worry.If you choose to close the lid, please make sure to use our silicone thermal pad. Steps for Cloning Step1Insert the target disk and the source disk into the slot respectively. Be sure not to misplace.Please note: The target drive must be equal to or larger than the source drive.Step 2Connect the power adapter. Then turn on the device. Do not connect to the computer via data cable.Step 3Press and hold the "start" button, and power on the device while holding the start button, keep holding the start button until you see all four lights are on and then off, then 25% of the progress light is flashing. You can release the start button.Note: All the lights will turn on when clone is completed. **WARNING***Target disk capacity has to be LARGER than original disk capacity. Please note: All data in the target disk will be overwritten when copying.*Do not connect to the computer while Cloning.*SSD condition: If there is a bad sector in the SSD, copying may stop. Scan the SSD once before copying to make sure there are no bad sectors.*The target disk will enter the offline mode after clone is finished, so the target disk cannot be recognized when you connect the device to your computer. Please manually select online on the disk management/disk utility.*The indicator light shows the clone progress (25% -50% -75% -100%), and all the lights will turn on when clone is completed. Two removable fastenerEasy Assembly for different sizes of SSDs. Secure your SSD with fastener. No need for screw and screwdriver.Slide designThe enclosure is fixed by a screw. Loosen the screw and slide it back slightly to open the upper cover.Four non-slip padsEffectively prevent the device from sliding at will. Ensure the safety and stability of the operation process. Frequently Asked Questions Q: Can i clone data from a smaller drive to larger drive, say a 256gb to 1tb? A: The target drive must be equal to or larger than the source drive. So cloning 256gb(source disk) to 1tb(target disk) is ok. Q: What's the states of the LED indicator light when finished? A: The four indicator lights will always be on. Q: Will this copy sata to nvme? A: No. It can only support NVMe to NVMe. It can only support NVMe PCIe M.2 SSD M-Key 2230 2242 2260 2280. Q: My computer cannot recognize the target disk after clone finished? A: The target disk will enter the offline mode after clone is finished, so the target disk cannot be recognized when you connect the device to your computer. Please manually select online on the disk management/disk utility. Q: Can I clone from ssd inside my computer to m2 in the bay, using third party software? A: Yes, you can. Q: Will this clone to a larger drive and automatically expand the partition to the size of the new drive? A: It can clone to a larger drive. But the clone will not change or resize the partition. Cloning will not change anything. Q: Can the M.2 duplicators be used as external ssd enclosure? Or it can only for cloning? A: Both are ok. It is a m.2 cloner, but you can also use it as external ssd enclosure to access data.

Price: 101.99 USD

Location: Hebron, Kentucky

End Time: 2024-01-13T05:03:22.000Z

Shipping Cost: 0 USD