Description: The camera body in the photo is NOT included.Over 25% discount when buying a complete set! All other options are for the single item only. There are many different Yashica 6X6 TLR models. To insure that this fits your camera, please see the last photo and check the dimensions listed. If your camera matches the dimensions shown in the picture, then this should fit. This is for the model Yashica 124-G, and most other 6X6 Yashica TLRs with the outer lens bayonet and will NOT fit the Yashica 44 series or other Yashica TLRs WITHOUT bayonet mounts. I cannot guarantee it will fit every outer bayonet 6X6 Yashica TLR but you can see the hood in the pictures will fit the very early Yashica-Mat with the 80mm Lumaxar lens, so I am assuming it will fit the similar cameras between the ages of these cameras. KNOWN CAMERAS THIS HOOD WILL FIT: (Will fit many Bayonet I lens sets, see the last photo)Yashica 635Yashica-MatYashica-DYashica-Mat 124Yashica-Mat 124-GI am an inventor and designer with 75 US patents. I am always looking for ways to improve things. I own a lot of cameras, mostly film, and am always looking for someway to improve my photographs. This Yashica 124 G is one of many TLR cameras I have owned (Rolleiflex 2.8F, 3.5F, Yashica-Mat. Yashica A, Mamiya C330, Yashica 44LM and the Yashica 44A). The one thing that always seemed to be missing was a lens hood for the viewing lens. Why is this needed? While it is most important to shield the "taking" lens to keep lens flare to a minimum, the "viewing" lens also needs to be shaded. This improves viewing and focusing, but also gives you a more accurate idea of the photo you are taking because even with a shade you could position the camera in such a way that there will still be lens flare. This dual shade will help you determine if you have flare, or how much to control "purposeful" or unavoidable flare. I am sure I could have purchased a second hood for some of the cameras (but not for those with outer bayonets), but hoods are rare, expensive or unavailable. For that reason I designed and 3D-printed this hood and cap for my Yashica A. It takes about 4 hours to 3D-print the dual lens hood. As is normal for FDM 3D-printing; there may be gaps, protrusions and imperfections in the surfaces of the print (see photos), but none of these imperfections will impede shading of your lens. Buyer Reviews for Various Lens Shades: Awesome! What a great idea. Thanks, it will get good use!! Fast Shipping tooExcellent service and very good product , field tested this week end - super!Hood and lens cap arrived quickly and as described. Great seller!Thank you! Love my lens hood and lens cap 🔥💫Great seller. Very happy with the lens hoodThe product got here on time and was a perfect fit to my camera.Fits perfectly. Recommend.Fits great and shipped fast. Great eBayer!YashicaMAT124 - FITS PERFECT! Great seller, love the Hood, fast, neatThanks for the shade. This is a really handy item you did! The shades for this camera are impossible to Find and does the trick to stop flare. Thanks again!A+ Fits like a dream! Shipped fast and packed well. Just what I wanted!The hood slips perfectly over the TLR lens. I finally have a lens cap.By nature adds slight bulk to camera, fits good, sturdy, protects/shades lensesThis is a great invention to a ongoing problem for this camera! Thank you!!Very good condition, happy with it !!!I recommend all products from this seller. These innovations are needed. Thanks!Better than expected! Super fast ship 5 stars thx !!Exactly what I needed, fits Yashica D perfectly.Great product. Perfect fit!Fantastic item and looks great on the camera. Highly recommended!! See my other TLR Hoods!Minolta Autocord Lens Hood/Shade and Dual Cap Rolleicord II Type 2 & 3 Also Rolleiflex 3.5 Automat Hood/Shade and Dual Cap Rolleiflex Bay I 3.5 Automat Model 3, Rolleicord V and Va Lens Hood/Shade and Dual Cap Rolleiflex Bay II 3.5F Lens Hood/Shade and Dual Cap Rolleiflex Bay II 3.5E, E2 Type 1 & E2 Type 2 Lens Hood/Shade and Dual Cap Rolleiflex Bay III 2.8D-F Dual/Single Lens Hood/Shade and Caps Rolleiflex Bay IV FT & FW Dual/Single Lens Hood/Shade &Caps Yashica-A Lens Hood/Shade and Dual Cap Yashica-44A Lens Hood/Shade and Dual Cap Yashica 44-LM Lens Hood/Shade and Dual Cap Yashica-Mat Lens Hood/Shade and Dual Cap Yashica-D Lens Hood/Shade and Dual Cap Yashica 124-G Lens Hood/Shade and Dual Cap
Price: 13 USD
Location: Franksville, Wisconsin
End Time: 2023-10-05T12:20:02.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Custom Bundle: No
Fastening: Twist-On
To Fit Lens Front: Bayonet 1
Brand: Bayonet III
Available Variations
Color: Complete Set - Standard
Price: 45 USD
Available Quantity: 8
Quantity Sold: 0
Color: Complete Set with Film ID
Price: 63 USD
Available Quantity: 8
Quantity Sold: 0
Color: Dual Lens Hood - Standard
Price: 23 USD
Available Quantity: 8
Quantity Sold: 0
Color: Dual Lens Hood Cover ONLY
Price: 13 USD
Available Quantity: 8
Quantity Sold: 0
Color: Dual Lens Hood with Film ID
Price: 27 USD
Available Quantity: 8
Quantity Sold: 0
Color: Single Lens Hood - Standard
Price: 13 USD
Available Quantity: 8
Quantity Sold: 1
Color: Single Lens Hood with Film ID
Price: 17 USD
Available Quantity: 8
Quantity Sold: 1
Color: Dual Lens Cap - Standard
Price: 13 USD
Available Quantity: 8
Quantity Sold: 1
Color: Dual Lens Cap for Filter on Taking Lens
Price: 16 USD
Available Quantity: 8
Quantity Sold: 0
