Yaesu FTM-500D Dual Band Transceiver 50W JAPAN NEW free shipping NEW

Description: DescriptionCondition：NEW Equipped with 6W front speakerA 6W high-output front speaker is mounted inside the control head to reproduce clear sound from the front. The front speakers are positioned downward inside the head, with a slit in the rear section to improve sound evacuation, and the wide tapered grille at the bottom of the head is designed to allow sound to exit efficiently to the front. The wide-tapered grille at the bottom of the head is designed so that sound can efficiently exit to the front through the wide-tapered grille.AESS Dual Speaker System AESS: Acoustic Enhanced Speaker SystemThe AESS phase-corrected dual-speaker system uses both the main speakers and front speakers. AESS achieves clear, expansive high sound quality by varying the phase, output balance, and frequency response of the front and main speaker outputs. The high total output power of 9W from the main unit and front speakers combined ensures reliable communication even when operating in noisy locations. High-definition full-color LCD touch panel displayThe 2.4-inch full-color touch panel display provides excellent visibility with its full-color display of the frequency and communication mode of the operating band, a monitor screen showing reception status, a compass screen showing location information, and various setting screens.The frequency display color of the operating band can be selected from white, blue, or red to suit your preference. Variable angle swing head for excellent visibilityThe control head can be angled upward 20 degrees to the main unit, which is convenient for installation under the vehicle dashboard. The optional swing head kit (SJMK-500) allows the head angle to be freely changed vertically and horizontally for comfortable operation by fixing the head at an angle that is easy to operate.　The extension cable (CT-132) is not necessary. Simultaneous reception of two waves, C4FM/C4FM dual reception (digital D/D) New operating feel of dual-mobility, the latest operating system E2O-IV 《Easy to Operate-IV》.The latest operating system, E2O-IV, offers a new operating feel, including a touch-and-go function that instantly moves to the desired frequency from the scope screen and a search-and-go function that enables simultaneous reception of the frequency you want to listen to from the scope screen while the unit is in operation, for comfortable operation with multiple functions. One-touch Scope Function The one-touch scope function enables instantaneous switching between scope operation and dual reception operation by simply pressing the “DISP” key in VFO mode or memory channel mode. In scope operation, the high-speed scope function operates while operating on the main frequency. Quick Back Function When moving from the currently operating frequency to another frequency, the user can return to the frequency before the change by pressing the “BACK” key if the moved frequency display is within 5 seconds. Search & Go and Touch & Go functions In the scope screen in VFO mode or memory channel mode, the Search & Go function switches to dual reception operation by briefly pressing the bar of the signal you want to hear. The Touch & Go function allows you to switch the operating frequency by pressing and holding the bar of the signal you want to listen to, enabling comfortable operation while monitoring the reception status. PMG: Primary Memory Group function With a single push of the “PMG” key, multiple frequencies (up to 5 channels) to be monitored can be registered to a PMG group, regardless of the VFO or memory channel. After that, simply pressing the “PMG” key displays the reception status of the registered channels in a bar graph on the screen. In auto mode, dual reception is automatically activated when a signal from a registered channel other than the operational channel is received. Switching between operational channels from the monitor screen or dual reception screen can also be easily performed by touch operation. Memory Auto Grouping (MAG) Function The memory auto grouping (MAG) function allows memory channels to be automatically grouped by band and recalled. When the “BAND” key is pressed while operating a memory channel, the band switches in the order of ALL, AIR band, 144MHz/VHF band, 430MHz/UHF band, and OTHER, and the memory channels grouped by each band can be recalled. ALL recalls all memory channels. Up to 8 frequently used functions can be registered for easy operation 《CFL》 Customized function list The CFL (Customized Function List), which allows you to check and change frequently used functions, displays a list of up to eight priority functions with a single touch of the “FUNC” knob, allowing you to easily execute functions and change settings without changing the screen. The “FUNC” knob can be used to easily move from the setup menu to the function list. VFO Band Skip Function The VFO band skip function allows you to skip unused bands when operating in VFO mode. Frequencies registered in the memory channel can be recalled in memory mode even if they are in bands skipped in VFO mode, so you can use VFO and memory channel separately for even more comfortable operation. Memory Channel VFO Transfer Function The memory channel VFO transfer function transfers memory channel information to VFO with a single touch during memory mode operation, allowing smooth VFO operation without changing communication settings. High-quality C4FM digital sound AMS (Automatic Mode Select ) realizes FM friendly digital AMS is an FM friendly digital function that enables communication between all members without having to switch between analog FM and C4FM digital communication modes each time. DG-ID (Digital Group ID) / Group Monitor (GM) Members can easily enjoy group communication by simply setting a common frequency and number (DG-ID number). When the DG-ID number is “00”, all audio can be received.　Members who are set to the same DG-ID number can be automatically checked to see if they are within communication range and displayed for each call sign (up to 24 stations), or if a specific call sign is selected, it can be displayed in real time on the compass display screen. Color compass display for comfortable navigation ● Real-time navigation function While communicating in C4FM Digital's V/D mode, simply touch the screen to display the position of the other station on the compass screen for easy confirmation of direction and distance. Backtrack function Displays the distance and azimuth from the current location to a pre-registered point in real time. If the starting point is registered, navigation can be performed as a backtrack function that returns from the current location to the starting point. (Up to three locations can be registered) High-precision GPS receiver The GPS receiver is compatible with MICHIBIKI, a quasi-zenith satellite system that enables highly accurate positioning, and C4FM's digital mode can display the position and direction of the other station in real time even during voice communication. An external terminal on the front panel allows connection of an external GPS device. 1200/9600 bps APRS communication Supports various APRS information displays, reception list displays, message transmission, and Smart Beaconing? It can exchange position information between its own station and other stations, display it on the display, and use the compass display to determine its positional relationship with other stations. You can also view the movement trajectory via the Internet. Recording function The user can record the voice of the other station and the voice of his/her own station. Recorded voice data is stored in a microSD card as a voice list for easy playback. With the optional voice guide unit (FVS-2), automatic recording of the last 30 seconds of communication and frequency readout (voice guidance) are available. Bluetooth wireless operation support BluetoothR wireless operation is possible using a BluetoothR headset (SSM-BT10: optional) or a commercially available headset. Hands-free operation is also possible by using the automatic voice transmission (VOX) function. The SSM-BT10 BluetoothR headset can be used for approximately 20 hours on a single charge. *Although commercially available BluetoothR headsets can be used, the operation of all BluetoothR products is not guaranteed. We recommend using the optional BluetoothR headset SSM-BT10. WIRES-X portable digital node function supported Equipped with microSD card slot A microSD card (up to 32 GB) can be used to store GPS logger (to display movement track information on a PC later), voice data, and backup of memory contents. It is also possible to share and clone configuration information with other radios. Full-scale wideband reception The circuit configuration of the wideband reception covers 108 MHz to 999.995 MHz continuously. Communication modes are supported for both C4FM digital and analog FM modes with excellent communication quality, as well as AM (airband reception). 2nd PTT function for direct sub-band transmission A second PTT function is provided that allows direct transmission even on sub-bands (frequencies indicated at the bottom of the display) using the microphone's program key (P1: factory default setting). Large capacity 1104-channel memory In addition to the normal memory channels (999 channels), 50 sets of memory channels for PMS (100 channels) and home channels (5 channels), for a total of 1104 channel memory, each channel can be set with a memory tag of 16 characters (8 double-byte characters: kanji compatible). FACC cooling system that guarantees stable transmission output?FACC: Funnel Air-Convection Conductor Air drawn in from the front and sides is discharged to the outside by a cooling fan installed on the rear side through a specially processed, highly heat-dissipating aluminum die-cast placed on the underside of the transceiver for cooling the end-stage amplifier, thus enabling efficient cooling of the power amplifier. The cooling fan is located on the back of the FTM-500D. The cooling fan is equipped only on the FTM-500D (50W model). Control Head Separate Compatible The FTM-500D is compatible with both the control head integrated type and the separate type installed on the dashboard with the main transceiver unit separated from it. For separate operation, a 6m type extension cable (CT-132) is available as an option, allowing smooth installation and comfortable operation according to the installation location. Other Practical Functions Various individual calls including tone squelch, DCS, and pager (EPCS) functions Split memory function Auto Repeater Shift (ARS) function DTMF send / DTMF memory function GPS logger function Multifunctional rear DATA terminal (GPS position data, WAYpoint data, WIRES-X HRI-200 connection, portable digital node function, etc.) Clock and timer functions VOX (voice automatic transmission) function Altitude display LOCK function to prevent accidental operation APO function to automatically turn off power after a certain period of inactivity Time-out timer (TOT) function to prevent continuous transmission Key illumination for easy operation in dark places Standard components DTMF microphone SSM-85D Bracket for main unit DC power cable Shipping We always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status. Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order. Shipping is available from Monday to Friday. Weekends are not available because freight companies are closed.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Price: 454.99 USD

Location: Tokyo-to Tokyo

End Time: 2024-12-09T03:45:35.000Z

Shipping Cost: 0 USD