Weld-in Frame Bulkhead Plate Oval with Terminals Squeeg's Hot Rod Connection

Description: Squeeg’s offers its own design of bulkhead plates for use in any frame. Oval Bulkhead Plate with Terminals Weld- in 3” x 6” frame plate with a 2” x 4.5” removable blank oval plate. Contains mounting hardware for the oval plate. The electrical plate consists of two nylon insulated terminals with brass inserts. The small terminal is tapped at 10-32 and the large is at ¼-20. This is ideal for running electrical to the starter. The weld-in plate consists of ¼” 1018 steel and is milled to accept a precision fitted cap. Offered in an oval or round design, and either with electrical terminals or blank. Our plates will allow you to run your plumbing or electrical through your frame rails. The blank plate can be drilled for AN bulkhead fitting for plumbing or any other use you may need. SOLD EACH – Each bulkhead contains one weld in plate for the frame, one fitted plate, and screws. Plates with terminals include the insulated terminal with brass inserts. PRODUCT TAGS: Pan Head, Allen, Bolt, With Terminals, Electrical, Oval, Weld-in, Frame, Bulkhead, Plate,1018 Steel, BHOP-T,10-32, 1/4-20 All of our products are proudly 100% made in the U.S.A. Our products are original designs meant to fill a void in the market, not just a copy of something already being offered. We have been using these parts for years in the shop on the cars we drive and build at Squeeg’s Kustoms. Look for our other parts in our eBay store. Also available from Squeeg’s Hot Rod Aluminum Line Separators: Black anodized aluminum line separators for Fuel Line, Oil Line, Heater Line & A/C Line – including the new EZ-Clip A/C Line. Separators are available for two, three or four lines in all popular configurations. An innovative design where the lines simply clip in to make installation and future servicing a snap with no fiddly hardware to lose. Sold individually. Matching Plug Wire Separators also available. NEW Nylon Line Mounts & Separators: The same design as our aluminum separators, but made out of durable nylon at a fraction of the cost and also made as mounts . Available for standard A/C Line. EZ-Clip A/C Line and Heater Line. Mounts include 8-32 hardware. Sold individually. Matching Nylon Spark Plug Wire Mounts, Separators, and Kits available. Aluminum Spark Plug Wire Kits, Mounts & Separators: Black anodized aluminum separators for plug wires. Just like our Line Separators, the wires simply clip in to make installation and future servicing a snap with no fiddly hardware to lose. Offered in 8mm and 8.5mm. There are 3 kits for Big Block Chevy, Small Block Chevy, and Small Block Ford in either 8mm or 8.5mm. Also available are the individual components so customers can build their own kits. The wire mounts are sold two per pack and the floating separators four per kit NEW Nylon Spark Plug Wire Kits, Mounts & Separators: The same design as our original aluminum, but made out of durable nylon at a fraction of the cost. Just like our Line Separators, the wires simply clip in to make installation and future servicing a snap with no fiddly hardware to lose. Offered in 7mm, 8mm or 8.5mm. There are 6 different kits for Big Block Chevy, Small Block Chevy, Small Block Chrysler, Big Block Fords and Small Block Ford. Also available are the individual components so customers can build their own kits. The wire mounts are sold two per pack and the floating separators four per pack. New shorty and 90° mounts for tight applications. Aluminum Grommets: A unique alternative to simply using a rubber grommet when routing lines, cables, wires, etc. through any panel. Deep enough to run through frame rails or can be used on thin sheet metal panels. Size from ¼” to 1 ¼” available in raw aluminum and now black anodized. Sold individually. Line Bulkheads: Aluminum bolt-on #3 AN brake line bulkhead. Perfect for joining your hard line to a brake hose. Mounts solid to your frame for a secure connection. Available soon for #4AN, #6AN & #8AN. Sold individually. Epoxy Primer Filler Kits and Epoxy Top Coat Kits: Looking for the good stuff you used to use? Our legendary Epoxy Primer is still available! The same stuff we’ve been using in the shop for decades is still available. Not legal for sale or use in CA, CT, DE, IL, IN, MA, MD, ME, NH, NJ, NY, OH, PA, RI, VA or VT. We cannot, under any circumstances, ship to these states. Any order placed from these states will be refunded. Sold with 1 gallon of part A, 1 gallon of part B and either a quart or gallon of reducer. Exhaust Tips: Beautiful brushed stainless steel exhaust tips flared at the ends designed to be welded on. Available for 2”, 2-1/2” & 3” exhaust. Sold individually. Aluminum Hood Release Handle: Easier to use than the standard round knobs included in most hood release kits. Machined aluminum handle fits ¼” (0.25”) shaft. Pewter Key Chains: Based on original artwork by Jimmy Smith of cars built by Squeeg’s Kustoms. 6 designs available; 32 Ford Coupe, 33 Ford Roadster, 34 Ford Coupe, 36 Ford Coupe, 40 Ford Coupe, and 50 Merc Custom. Sold individually. Steering Wheels, Adapters & Spacer: Cast aluminum drilled I Beam style perfect for early hot rods. Available as cast or polished, wrapped or unwrapped. Two column adapters available: early Ford (1928-48) keyed columns and GM splined columns as well as an Aluminum ½” spacer. Sold individually. T-Shirts: Several styles available featuring artwork by Jimmy Smith. Available in Black or White in Sizes from Medium through 3XL. Many clearance shirts are available in various colors as well as Women’s shirts and hats. Weld in Bulkheads: Steel weld-in frame bulkheads to run lines or wiring through your frame. Weld in bulkheads available with a plain removable plate or with two terminals perfect for running wiring from your battery to your starter. Squeeg’s offers its own design of bulkhead plates for use in almost any frame. Chose from a blank plate or with terminals. The weld-in plate consists of ¼ 1018 steel and is milled to accept a precision fitted cap. Offered in an oval or round design, these plates will allow you to run your plumbing or electrical through your frame rails. The electrical plate consists of two nylon insulated terminals with brass inserts. The small terminal is tapped at 10/32 and the large is at ¼ 20. This is ideal for running electrical to the starter. We also offer a blank plate which can be drilled for AN bulkhead fitting for plumbing or any other use you may need. Sold individually. Wheels: Early Sprint Car style classic aluminum wheels. Available in Starburst for Ford spindle mount 15” x 4.5”, Sprint in sizes from 15” x 4.5” through 16” x 10”, and Champs in sizes from 16” x 11” through 16” x 13”. All wheels are made to order. Standard available bolt patterns 5 on 4 ½”, 5 on 4 ¾” and 5 on 5 ½”. Other bolt patterns are available, contact us for more information. Wheel Center Caps: Cast aluminum caps designed to match cast wheels. Originally designed for Halibrand style American Rebel wheels, but suitable for many other wheels. Made in flat or with a domed center. Available as cast or polished in 5 on 4 ½”, 5 on 4 ¾” and 5 on 5 ½” bolt patterns. PROP 65 WARNING: May contain materials known to the state of California to cause cancer or reproductive harm. TAGS: Squeeg’s, Kustoms, Hot Rod Connection, American Made, Made in America, Made in the USA, Made in the U.S.A., Made in the U. S. A., Part, Parts, Antique, Car, Classic, Cruiser, Custom, Drag, Driver, Fat Fendered, High Tech, Highboy, Hot Rod, Kit Car, Kustom, Land Yacht, Leadsled, Lowboy, Lowrider, Modern, Muscle Car, Off Road, Pony Car, Pro Mod, Pro Street, Pro Touring, Race Car, Racing, Rat Rod, Replicar, Resto Mod, Resto Rod, Show Car, Show Rod, Slammed, Sleeper, Sports Car, Street Machine, Street Rod, T-Bucket, Track T, Traditional, Trailer Queen, Truck, Van, Vintage, Fabricated, Fabrication

Price: 79.95 USD

Location: Chandler, Arizona

End Time: 2023-12-29T18:09:12.000Z

Shipping Cost: 10.4 USD