WallWell 47 inch x 12 inch PU Faux Stone Wall Panel Siding

Description: 7531828666Description: Crafted from high-quality polyurethane (PU) material, these faux stone panels boast lightweight construction, facilitating effortless installation. Their versatility extends to both indoor and outdoor applications, serving as exquisite options for wall embellishment, cladding, or enhancing the aesthetic appeal of shops with their authentic textures and styles. From commercial establishments to residential spaces, garages, ADUs, and beyond, they enrich environments, imbuing them with a sense of natural beauty. Features: - Dimensions: 48 1/4" Width x 13 1/8" Height x 1 3/8" Thickness; Without the edge 47 1/8" x 11 7/8", Full coverage area 3.89 sq.ft.- Save up to 80% over masonry work- Do-it-yourself friendly, no mortar no mess, and virtually maintenance-free.- The panels exhibit waterproof, flame-retardant, corrosion-resistant, and colorfast attributes, ensuring exceptional durability.- Their durable construction not only enhances longevity but also provides energy-saving benefits and additional insulation.- Molded with lifelike clarity, these panels closely resemble authentic stacked stone, elevating the visual appeal of any space.- Installation is a breeze, catering to both professionals and DIY enthusiasts. With basic tools like screws, a power screwdriver, saw, and adhesive, achieving professional-looking results is easily attainable. We recommend using construction adhesive along with screws for installation. Depending on your wall type, different installation methods can be chosen. We suggest using a construction adhesive similar to Loctite PL Premium Construction Adhesive. When purchasing more than six wall panels, a touch-up paint kit will be provided based on the quantity purchased. Preparation Before Installation： Recommended Tools: Structural Adhesive (900 grams covers approximately 100 square feet)LevelHand sawGlovesTape measureNail gun and nailsPencilSafety gogglesElectric drillDeck screws Installation Steps 1.Clean the wall surface using a spirit level to ensure it is free of debris and dust. The wall should be flat before beginning installation. 2.Measure the area of the wall where the panels will be installed and create a layout sketch to plan the arrangement. 3.Use a hand saw or another cutting tool to trim the panels to the required size. 4.Apply structural adhesive to the back of the panel. Also, apply adhesive to the side seams if needed. Begin installation from the bottom left corner. You can also apply adhesive to the gaps between panels to enhance their stability. 5.Position the panels on the wall from bottom to top, and left to right. Secure the panels before the adhesive dries completely. Reinforce with an air nail gun or appropriate screws depending on the wall material. Use one screw every 16 inches, with four screws per panel. Insert screws in the middle of the tongue or through the panel itself for added security. Use the following screws based on the wall material: Wood: Deck screwsConcrete: Tapcon screwsStucco: Tapcon screwsBrick: Tapcon screwsDrywall: Drywall screws 6.Continue installing the panels, ensuring each one fits well and checking for level alignment throughout the process. 7.Complete the installation of wall panels, corners, and edges with the assistance of a second person. Clean any dust from the surface of the panels to finish.

Price: 41 USD

Location: El Monte, California

End Time: 2024-09-14T00:36:19.000Z

Shipping Cost: 0 USD