Description: VMAX VBC1210LFP3-Stage 10A LiFePO4 Smart Charger/Maintainer for 12V Lithium BatteriesLiFePO4 The 1210LFP is a fully Automatic, 10A, Smart 3-STAGE LiFePO4 Battery Charger/Maintainer. Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely. The 3 stages are: Bulk; Absorption & Float. Uses:Charging LiFePO4 12.8V Batteries It can also be used as a 10A DC power supply. Specifications:Input Voltage: 110-240VAC MAX Input Current: With Load: 2.5A, No Load: 0.05AInput Power: With Load: 150W, No Load: 0.5WNominal Voltage:12V Bulk Charge Voltage: 14.4V-14.8V, Current: 10AAbsorption Charge Voltage: 14.6V. Current: 10A - 1A Float Voltage: 14.6V with Pulse Charging. Bulk Charge Current: 10A Battery Type: LiFePO4 Recommended Battery Capacity: 10-150Ah Operating Temperature: -20F ~ 115F (Note: LiFePO4 batteries with BMS will not charge below 32F)Storage Temperature: -40F ~ 165F Connector: Insulated Alligator ClampsCharging Cord Length: 4ft Size: 7" L x 3.2" W x 1.8" H Weight: 2.3 lb. Charging Instructions:1- Connect the RED Charger alligator clamp to the RED Positive (+) Battery Terminal.2- Connect the BLACK Charger alligator clamp to the BLACK Negative (-) Battery Terminal.3- Connect the Charger AC power cord to the 110V/220V AC mains powered socket.4- Upon detecting a good battery with minimum Voltage of 8V, LED will TURN RED as Bulk Charging begins. If Battery is almost charged when connected, and charging current is <1A, LED will Blink RED then switch to GREEN as charger goes into Float mode. If Battery voltage is below 8V, LED will turn GREEN while charger performs soft start charging; to raise the Battery voltage to 8V. If the Battery accepts the charge, LED will turn RED at 8V and BULK Charging begins. 5- As the charging current drops below 1A, LED will switch to GREEN and Charger will go into Float mode. Charger will slowly bring the battery to 100% State of Charge as charging current drops to 0A. If LED does not turn RED at any point after powering Charger and connecting it to Battery, disconnect and troubleshoot Battery and Charger. Most probable cause is a defective Battery. 6- Disconnect AC cord from mains and alligator clamps from battery. Estimated Charging Time: BATTERY CAPACITYEST. CHARGING TIME 10AH1HR40AH4HR100AH10HR150AH15HR
Price: 79.99 USD
Location: Detroit, Michigan
End Time: 2024-02-03T18:26:42.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return shipping will be paid by: Buyer
Battery Capacity: 0
Compatible Battery Sizes: 12 V
Type: Charger Maintainer
Bulk Charge Voltage: 14.4V-14.8V, Current: 10A
Size: 7" L x 3.2" W x 1.8" H
Compatible with Battery Types: LiFePO4
Input Voltage: 110-240VAC
MPN: VBC1210LFP
MAX Input Current: With Load: 2.5A, No Load: 0.05A
Connector: Insulated Alligator Clamps
Charging Current: 10A
Other Uses: 10A DC Power Supply
Recommended Battery Capacity: 10-150Ah
Input Power: With Load: 150W (No Load: 0.5W)
Operating Temperature: -20F ~ 115F
Brand: VMAXTANKS
Application: 12 Volt Batteries
Amp Hours: 0
Chemical Composition: LiFePO4
Voltage: 12 V
