VEVOR Industrial Water Chiller for CO2 Laser Tube Engraver Cutter CW5200/CW3000

Description: eBay CW-3000 Procduct Introduction CW-3000 Series is professional cooling machine referring to international, advanced thermolysis cooling system design, suitable for small water-cooled cooling devices requested machinery. The Industrial Water Chiller has a patent Certificate, CE and RoHS Certificate. It has been sold largely to Europe, South America, Asia and other markets. Economic cooling equipment, easy to install and operate, compact and easily movable. It is designed for cooling the one CO2 glass laser tube under 60W/80W of the laser engraving and cutting machine. Install steps: 1. Open the package to check if the machine is intact and all the necessary accessories are completed. 2. Open the mouth screw on the top of machine, add cooling water (Please don’t power the machine without water). 3. According to system conditions, connect the water isnlet and outlet pipe well. 4. Connect the power cable, turn the power switch (Note: Don’t let the water overflow). 5. Check the radiator water level again (Keep the distance between water level and mouth is 80–150mm). Notice: Cooling machine no use for long time or in transport must keep emptying the cooling water. It is designed for cooling the UV lamp under 300W of the UV printer machine. It is strictly forbidden to plug and run the cooler without feeding water. Cooler should be placed in a well-ventilated, dry environment place and away from heat sources. Please keep at least 30cm from obstructions to the air outlet which is in the back of the cooler, and should leave at least 10cm between obstructions and air inlets of two sides. To protect laser tubes , the radiator fan of cooler will suspend to work when water temperature is lower (about 10℃) , and it will restart to run when water temperature rises to higher (about 20℃). To ensure good heat dissipating, please open the lid to clean the dirt after the cooler used in long-term. Working in cold north area, it is better to use noncorrosive. Remarks: CW3000 water chillers are equipped high speed fans inside, NOT able to control the water temperature. Features Comprehensive reference to the international radiator - type cooling system. It can control the water temperature, precision is ±0.1°C. Forces circulation, 9L cooling tank capacity. Small thermolysis water cooler, energy saving, long working life and simple operation. You can choose different models according to local voltage and frequency. With completed water flow and over high temperature alarm functions. Professional forced air-cooled radiator, high heat dissipating capacity and not easy to be blocked. Equipped with alarm output port, can quickly protect sensitive components. Multiple power specifications; CE approval; RoHS approval. Hermetic type water tank, water is available for a long time used. Real-time temperature monitoring, accurate knowledge of heating devices working condition. High cost performance, low failure rate. Technical Specifications MODEL: CW-3000DG Voltage: 110V Frequence: 50HZ Current: 0.45A Cooling: 50W/℃ Capacity: 9L Max .Lift: 10M Max.Flow: 10L/Min N.W: 21Lbs / 9.5kg G.W: 26Lbs / 12kg Protection: Flow Alarm Package: Carton Box Way Of Circulation: Water Pump Forces Circulation Dimensions: 18.5in*10.6in*14.6in / 470mm*270*370mm (L*W*H) Packing Dimensions: 23.2in*15in*18.5in / 590*380*470mm (L*W*H) Inlet And Outlet Hold: Outside Dimensions 10mm Brass Connector Packing list 1 × CW3000 Water Chiller Machine 1 × Power Cable 1 × User Manual 1 × Alarm Signal Output Plug 2 × Sealing Washer CW-5000 Industrial Water Cooler Chiller CW-5000 Series is a professional cooling machine referring to international, advanced thermolysis cooling system design, suitable for small water-cooled cooling devices requested machinery. It has 8.5L cooling tank capacity With completed water flow and over high-temperature alarm functions. Built-In cooling fan for effective ventilation ensures its high heat dissipating capacity. Designed for cooling the one CO2 glass laser tube under 80W/100W of the laser engraving and cutting machine. Features & Details 【PRODUCT PARAMETER】- The CW-5000DG industrial water cooler chiller is 8.5L capacity, 10L/max.flow, Precision: ±32.54℉/0.3℃, Cooling capacity: 840W, 110V Voltage 【EFFICIENT COOLING FAN】- The water cooler chiller has two professional forced air-cooled radiators, high heat dissipating capacity, and not easy to be blocked. High-speed fans inside quickly take away the heat. And the CW-5000's water inlet and outlet ports are made of anti-corrosive brass to keep from any leakage problems and extend long service life. 【CONSTANT & INTELLIGENT TEMPERATURE MODE 】- CW-5000 series industrial chiller can be used to cool high-power lasers. Two working temperature modes are constant temperature and intelligent temperature adjustment. The smart temperature control mode can be adjusted to the corresponding water temperature as the temperature changes, and the water temperature can be automatically adjusted according to the season. 【VARIOUS ALARM FUNCTIONS】-This professional industrial chiller has multiple warning protection mechanisms such as water flow alarm protection, high/low temperature alarm, compressor delay protection as well as compressor over-current protection. 【MULTIPLE APPLICATION】- CW-5000 Series professional industrial water cooler machine is suitable for small water-cooled cooling devices requested machinery. The Industrial Water Chiller has a patent Certificate, CE, and ROHS Certificate. It is designed for cooling the one CO2 glass laser tube under 80W/100W of the laser engraving and cutting machine. Emitting rate higher than 60%. Specifications Model: CW-5000DG Voltage:110V Current: 3.5~5.6A Tank Capacity: 8.5L Compressor Power: 0.305KW, 0.41HP Refrigerating Capacity: 2866Btu/h, 0.84KW, 722Kcal/h Refrigerant: R-134a Refrigerant Charge: 9.9oz / 280g Precision: ±32.54℉ / 0.3℃ Reducer: Capillary Pump Power: 0.03KW Maximum Flow: 10L/min Maximum Pumping Lift: 8.7 Yards / 8M Inlet and Outlet: External Φ0.4in / 10mm brass connector Packing Dimensions: 28.3"x17.3"x24.4"/720x440x620mm (L*W*H) Product size:22.83"x11.41"x18.50"/580x290x470mm (L*W*H) Protection: Over current protection for compressor, flow alarm, over temperature alarm Package Content 1 × CW-5000DG Water Chiller Machine 1 × Power Cable 2 x Sealing Washer 1 × Spare Fuse 1 × User Manual 1 × Alarm Signal Output Plug CW-5200 Product Description: CW-5200 Series are professional cooling machines referring to international, advanced thermolysis cooling system designed, suitable for small water-cooled cooling devices requested machinery. The Industrial Water Chiller has a patent Certificate, CE and RoHS Certificate. It has been sold largely to Europe, South America, Asia and other markets. It is designed for cooling the one CO2 glass laser tube under 130W/150W of the laser engraving and cutting machine. Technical data: Model: CW-5200DG Voltage:110V Current: 4.5~6.5A Tank Capacity: 6L Compressor Power: 0.68KW, 0.93HP Refrigerating Capacity: 5186Btu/h, 1.52KW, 1307Kcal/h Refrigerant: R-22 / R-134a / R-410a Refrigerant Charge: 12.3oz / 350g Precision: ±32.54℉ / 0.3℃ Reducer: Capillary Pump Power: 0.03KW Maximum Flow: 10L/min Maximum Pumping Lift: 11 Yards / 10M Inlet and Outlet: External Φ0.4in / 10mm brass connector Packing Dimensions: 28.3* 17.3 *24.4in / 720*440*620mm (L*W*H) Protection: Over current protection for compressor, flow alarm, over temperature alarm Package: 1 × CW-5200DG Water Chiller Machine 1 × Power Cable 1 × Connection Hose 2 x Sealing Washer 1 × Spare Fuse 1 × User Manua 1 × Alarm Signal Output Plug

Price: 159.99 USD

Location: 美国

End Time: 2024-08-10T03:55:03.000Z

Shipping Cost: 0 USD