Vibox

US Wantai 1axis cnc kit Nema42 Motor3256oz-in =23n.m &driver DQ2722MA 9.8A peak

Description: This item includes: 1 PC Nema 42 stepper motor with 23N.M=3265oz-in for Single shaft, 110BYGH150-001 1PC Stepper Motor Driver DQ2722MA 1, Stepper Motor Technical SpecificationsPart No.: 110BYGH150-001 Single shaft Frame Size: NEMA42Step Angle: 1.8 degreeVoltage: 5.44VDCCurrent: 6.8 A/phaseResistance: 0.8Ohm/phaseInductance: 15mH/phaseHolding torque: 23N.M 3256oz-inRotor inertia: 1090 g-cm2 Number of Wire Leads: 4Weight: 8.4kgLength: 150mmRED A+GREEN A-YELLOW B+BLUE B- 2. stepper motor driver:DQ2722MA Introduction The DQ2722MA is full digital 2 phase stepper driver based on DSP control. The drive voltage of which is from 110V to 220VAC. It is designed for use with the 2 phase hybrid stepper motor of all kinds with 86mm to 130mm outside diameter, regulated phase current1.0A to 9.8A. The circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly without noise and vibration. The highest micro step is 60000ppr. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, computer embroider machine, packing machine and etc. Feature High performance, low price 16 channels constant angle, constant torque micro steps, highest micro step: 60000ppr Highest response frequency: 200Kpps Current of winding will be reduced by approximately 50% when no step pulse command is received for 0.1 second Opto-isolated signal I/O Drive current is adjustable in 16 channels from 1.0A/phase to 9.8A/phase Single power supply from 110V to 220VAC Phase terminal memory function (motor phase terminal is memorized after input pulse train stopping 5s and it is recovered when stepper driver power on or signal MF changes from low level to high level)

Price: 224.66 USD

Location: Rowland Heights, California

End Time: 2024-11-17T07:23:55.000Z

Shipping Cost: 0 USD

Product Images

US Wantai 1axis cnc kit Nema42 Motor3256oz-in =23n.m &driver DQ2722MA 9.8A peakUS Wantai 1axis cnc kit Nema42 Motor3256oz-in =23n.m &driver DQ2722MA 9.8A peakUS Wantai 1axis cnc kit Nema42 Motor3256oz-in =23n.m &driver DQ2722MA 9.8A peakUS Wantai 1axis cnc kit Nema42 Motor3256oz-in =23n.m &driver DQ2722MA 9.8A peakUS Wantai 1axis cnc kit Nema42 Motor3256oz-in =23n.m &driver DQ2722MA 9.8A peakUS Wantai 1axis cnc kit Nema42 Motor3256oz-in =23n.m &driver DQ2722MA 9.8A peakUS Wantai 1axis cnc kit Nema42 Motor3256oz-in =23n.m &driver DQ2722MA 9.8A peakUS Wantai 1axis cnc kit Nema42 Motor3256oz-in =23n.m &driver DQ2722MA 9.8A peakUS Wantai 1axis cnc kit Nema42 Motor3256oz-in =23n.m &driver DQ2722MA 9.8A peakUS Wantai 1axis cnc kit Nema42 Motor3256oz-in =23n.m &driver DQ2722MA 9.8A peak

Item Specifics

All returns accepted: ReturnsNotAccepted

Full Step Angle: 1.8° (200 Steps)

Brand: wantai

Current Type: DC

Custom Bundle: No

Model: 110BYGH150-001

Shaft Diameter: 14mm

MPN: Does Not Apply

Insulation Class: B (Max 266°F)

Country/Region of Manufacture: China

Wiring Configuration: 4-Wire Bipolar

Modified Item: No

Holding Torque: 3256oz-in-=23N.M

Recommended

Wantai NEMA34 Stepper Motor 1232Oz-in,5.6A,4 wires, 2ph,WT86STH118-6004A,CNC kit
Wantai NEMA34 Stepper Motor 1232Oz-in,5.6A,4 wires, 2ph,WT86STH118-6004A,CNC kit

$69.00

View Details
(USA Ship) 1 PC Wantai Motor Driver DQ860HA,80V,7.8A,for Nema34 CNC Plasma, Cut
(USA Ship) 1 PC Wantai Motor Driver DQ860HA,80V,7.8A,for Nema34 CNC Plasma, Cut

$49.00

View Details
Wantai CNC kit-3Axis Nema34 Stepper Motor 1232OZ-In,5.6A&Driver DQ860HA,7.8A
Wantai CNC kit-3Axis Nema34 Stepper Motor 1232OZ-In,5.6A&Driver DQ860HA,7.8A

$356.96

View Details
USA FREE  Ship!Wantai4Axis Nema34 CNC Motor 1700oz-in +Driver 80V7.8A
USA FREE Ship!Wantai4Axis Nema34 CNC Motor 1700oz-in +Driver 80V7.8A

$493.00

View Details
Wantai New Arrival! 4Axis NEMA34 Stepper Motor 460Oz-in 4A &CNC Driver 8.2A kit
Wantai New Arrival! 4Axis NEMA34 Stepper Motor 460Oz-in 4A &CNC Driver 8.2A kit

$235.00

View Details
WANTAI DQ542MA CNC Stepper Motor Controller 4.2A/18V-50V/128 Micro 42 57 Series
WANTAI DQ542MA CNC Stepper Motor Controller 4.2A/18V-50V/128 Micro 42 57 Series

$22.99

View Details
UFO Model Alien Abduction Touch Table Lamp LED  Galaxy III
UFO Model Alien Abduction Touch Table Lamp LED Galaxy III

$98.00

View Details
Wantai 1PC Nema 34 Wantai Stepper Motor 486oz-in ,4.5A CNC Mill Engraver, cutter
Wantai 1PC Nema 34 Wantai Stepper Motor 486oz-in ,4.5A CNC Mill Engraver, cutter

$35.80

View Details
1PC Hybrid step Motor Driver DC18-50V, 1.0~4.2A,128Microsteps Wantai BIG SALE!
1PC Hybrid step Motor Driver DC18-50V, 1.0~4.2A,128Microsteps Wantai BIG SALE!

$36.00

View Details
Wantai Stepper Motor  NEMA 23  2.0A 1.8deg/step  57BYGH420-2
Wantai Stepper Motor  NEMA 23  2.0A 1.8deg/step  57BYGH420-2

$18.99

View Details