Unlimited Duckhead Upgrade for a Harbor Freight. Car Manual Tire Changer

Description: KBJunlimitedcom is a new manufacturer making tire changing tools truly unlimited by allowing the same duckhead arm to be used on motorcycle, car and SUV wheels. This duckhead tire changer upgrade is designed for use with the Harbor Freight style car tire changers and the Harbor Freight motorcycle attachment tire changers. <**TO USE THESE UPGRADES YOU MUST ALREADY OWN A UNIT SIMILAR TO THE HARBOR FREIGHT MANUAL TIRE CHANGER.**> This system is "Unlimited," in that it allows you to use the same duckhead tire changer arm on motorcycle, tires and car and SUV tires. The low-profile design reduces interference and friction from the tire during the half on phase, and the rake angle of the lever clears all of the commonly used ?drop center tools.? The whole design makes the tire change flow smoothly, avoiding the snags that can turn the task into a chore. For the car and SUV upgrade, the tire changer must have a 2-inch diameter Center Post Cap like the Harbor Freight tire changer. Designed for the Harbor Freight manual tire changer and all other manual tire changers that have a 1.65" (42 mm) diameter Center Post Cap. All Unlimited Tire Changers are made in and shipped from Sunrise, Florida Usually shipped within 24 hours. USPS Priority Mail with tracking. International shipping is available through eBay?s Global Shipping Program. Made in the USA Kit 2 = CAR KIT The Unlimited Duckhead adapter upgrades the Harbor Freight manual tire changer into a duckhead unit that not only makes the process a lot easier, but also enables you to safely work on alloy rims without damage by eliminating contact with the face of the rim. The same Duckhead Arm is used in the motorcycle changer. The kit comes with a tire lever that works perfectly on the duckhead and an Extra Hand. The Unlimited Duckhead is nylon and only touches the underside of the lip and prevents any contact from the leaver with the rim. This works with many types of tire changers, as long as they have a 2" diameter post cap like the Harbor Freight tire changer. In this kit you will receive: Main Arm with Swivel Plate Thumb Screw, and Duckhead Arm Extension Car Pivot with Bushing, Collet, and Allen Wrench 24" Tire Lever Extra Hand <**TO USE THESE UPGRADES FOR MOTORCYCLES YOU'LL ALSO NEED THE HARBOR FREIGHT MOTORCYCLE ATTACHMENT**> Kit 3 = CAR & 20mm MOTORCYCLE This worked with many types of tire changers, as long as they have a 2" diameter post cap like the Harbor Freight tire changer. The Unlimited Duckhead motorcycle adapter upgrades the Harbor Freight motorcycle attachment into a duckhead tire changer unit that not only makes the process a lot easier, but also enables you to safely work on alloy rims without damage by eliminating contact with the face of the rim. The 3/4"-20mm spindle will fit through most motorcycle bearings (unlike the Harbor Freight spindle which is 1 inch and requires the removal of your bearings to use. Most motorcycle bearings will fit over the 3/4?-20mm spindle with less than an 1/8? of play, which is ideal. Should you have one of the bikes with larger centers in your bearings let me know the size and I will make you a custom spindle. Should you have a small hole in the center of your wheel there is a ½"-13 millimeter spindle (see details below) The Unlimited Duckhead adapter upgrades the Harbor Freight manual tire changers into duckhead units that not only make the process a lot easier but also enable you to safely work on alloy rims without damage by eliminating contact with the face of the rim. The same Duckhead Arm is used in the motorcycle changer. The kit comes with a tire lever that works perfectly on the duckhead and an Extra Hand. The Unlimited Duckhead is nylon and only touches the underside of the lip and prevents any contact from the lever with the rim. In this kit you will receive: Main Arm with Swivel Bracket Thumb Screw, and Duckhead Duckhead Arm Extension Peg and Pads: 3 covered Rim Pads (to replace the rim clamps on your tire changer), Adjustable Sleeve with the Thumb Screw, Locking Peg and 6 Cable Ties 3/4"-20mm Motorcycle Pivot with Bushing, Collet, and Allen Wrench 3/4"-20mm Spindle with Nut and Washer Car Pivot with Bushing, Collet, and Allen Wrench 24" Tire Lever Extra Hand FULL Kit 5 = CAR, 20mm & 13mm MOTORCYCLE This works with many types of tire changer as long as they have a 2" diameter Post Cap like the Harbor Freight tire changer The Unlimited Duckhead motorcycle adapter upgrades the Harbor Freight motorcycle attachment into a duckhead tire changer unit that not only makes the process a lot easier, but also enables you to safely work on alloy rims without damage by eliminating contact with the face of the rim The 3/4"-20mm spindle will fit through most motorcycle bearings (unlike the Harbor Freight spindle which is 1inch and requires the removal of your bearings to use. Most motorcycle bearings will fit over the 3/4"-20mm spindle with less than an 1/8" of play, which is ideal. Should you have one of the bikes with larger centers in your bearings let me know the size and I will make you a custom spindle. Should you have a small hole in the center of your wheel (like, for example, the BMW K 1200 RS rear wheel, which is a single-sided swinging arm wheel with a lug nut going through the center hole), there is a 1/2"-13mm spindle which will fit through it. However, this requires the Harbor Freight overhead arm to be lowered into position and the Harbor Freight vertical 1? spindle to be placed over the top of the 1/2"-13mm spindle using the provided bushing that makes it a tight fit.The Unlimited Duckhead adapter upgrades the Harbor Freight manual tire changers into duckhead units that not only make the process a lot easier, but also enable you to safely work on alloy rims without damage by eliminating contact with the face of the rim. The same Duckhead Arm is used in the motorcycle changer. The kit comes with a tire lever that works perfectly on the duckhead and an extra hand. The Unlimited Duckhead is nylon and only touches the underside of the lip and prevents any contact from the lever with the rim. In this kit you will receive: Main Arm with Swivel Plate Thumb Screw, and Duckhead Duckhead Arm Extension Peg and Pads: 3 covered Rim Pads (to replace the rim clamps on your tire changer), Adjustable Sleeve with the Thumb Screw, Locking Peg and 6 Cable Ties 3/4"-20mm Motorcycle Pivot with Bushing, Collet, and Allen Wrench 3/4"-20mm Spindle with Nut and Washer 1/2"-13mm Motorcycle Pivot with Bushing and Collet 1/2"- 13mm Spindle with Nut and Washer Car Pivot with Bushing, Collet, and Allen Wrench 24" Tire Lever Extra Hand

Price: 295.69 USD

Location: Fort Lauderdale, Florida

End Time: 2024-08-07T21:19:54.000Z

Shipping Cost: 0 USD