Ultra Durable C130A 1 Pole Contactor 30 Amp 24VAC Coil

Description: Description An AC contactor is widely used in power on and off and circuit control. It will control the city's flow to all the unit's parts. If your contactor is broken or burned, the AC unit will lose its ability to cool the home adequately and may run continuously, maybe it is time to change it. EXACT FOR YOUR FAILED CONTACTOR The AC contactor may need when it develops a fault or goes bad. 1 Pole 30 Amp 24V Contactor will replace your bad AC contactor to provide power to the compressor and condenser to turn your AC unit on and off, control the flow of electricity to all parts of your unit and get it to work again. SIMPLE INSTALLATION Our 1 Pole 30 Amp 24V Contactor is straightforward to attach, load and use. You can the 05 following steps: Shut off the power to the AC. Verify that the power is off with a multimeter. Mark the wires and their location on the contactor, then remove them from the contactor. Remove the mounting screw then mount the contactor Reconnect the wires, and ensure that the wire connections are tight Turn the power back *Don’t forget to wear gloves and shut off the power to the AC and the furnace/ air handler. SPECIFICATIONS Poles: 1 (Single) Coil Voltage: 24 VAC current/ Amperage (FLA): 30A devices: Up to 600 VAC AC Frequency: 50/ 60 Hz Operating temperature: -25℃ - 70 ℃ *It is alright to replace a unit with having a higher rating but not the with a lower rating AC Contactor for Air Conditioner Compressor Condenser. Single Pole/ 1 Pole; Coil Voltage: 24 VAC; current: 30 FLA Amp; devices up to 600 VAC; Frequency: 50/60 Hz; Operating temperature: -25℃ - 70 ℃ 𝗖𝗢𝗡𝗧𝗥𝗢𝗟 𝗧𝗛𝗘 𝗙𝗟𝗢𝗪 𝗘𝗙𝗙𝗘𝗖𝗧𝗜𝗩𝗘𝗟𝗬: A broken or burned contactor can lead to electrical failure: A condenser unit never shuts off | The AC hums and will not turn on | the AC makes a chattering noise. 1 Pole 30 Amp 24V Contactor will replace your bad AC contactor to provide power to the compressor and condenser to turn your AC unit on and off, control the flow of electricity to all parts of your unit and get it to work again. 𝗣𝗥𝗘𝗠𝗜𝗨𝗠 𝗤𝗨𝗔𝗟𝗜𝗧𝗬: 1 Pole 30 Amp 24V is made of strong silver alloy which is oxidation resistant and has a high conductivity rating, temperature strength, and corrosion resistance. The high-quality plastic surface helps prevent people from touching the directly and may also protect the against dust and rainwater. 𝗣𝗘𝗥𝗙𝗘𝗖𝗧 𝗠𝗔𝗧𝗖𝗛: 1 Pole 30 Amp 24V Contactor can replace 1 pole contactor at 20A 25A 30A, (below or equal to 30A) on air conditioners and heat pumps. 𝗘𝗔𝗦𝗬 𝗧𝗢 𝗜𝗡𝗦𝗧𝗔𝗟𝗟: Our 1 Pole 30 Amp 24V Contactor is straightforward to attach, load and use. Unaccustomed users can also install and use it themselves. Don’t forget to wear gloves and shut off the power to the AC and the furnace/ air handler. Verify that the power is off with a multimeter. 100% PROTECTION: Enjoy reliable performance with our protection, ensuring that your product will always be covered for any defects or issues that may arise.

Price: 19.35 USD

Location: Valley, Nebraska

End Time: 2024-11-18T14:41:12.000Z

Shipping Cost: 0 USD