Tremec TKX Manual 5-Speed Transmission for Fits Chevy 350/383/305

Description: Our convenient transmission installation package includes the majority of parts required to install a Tremec TKX transmission behind your 85 and older SBC engine, Fits 2 piece rear main seal small block Chevy engines from 1955 to 1985 making it an ideal 5 speed manual transmission for Chevy 350, 283, 302, 305, 307, 327, 400 and 383 stroker, Features the Tremec TKX 5 speed transmission which is rated for 600 lb.-ft of torque with shift points up to 7500 RPM, 5th gear overdrive ratio of .68 to 1 allows you to use a performance rear end gear ratio while still cruising down the highway at a reasonable RPM for comfort and economy, Kit includes a TKX transmission, steel bellhousing, clutch kit, hydraulic throwout bearing, hardware, and wiring pigtails for reverse lights & electronic speedometer Tremec TKX Manual 5-Speed Transmission for Chevy 350/383/305 Sku # 91029036 Mfr. Part # 91029036 Condition New Brand Speedway Motors Sold Kit Details Info TKX transmission kit provides essentials to fit to your 1985 and older SBC Includes 5-speed Tremec TKX manual transmission rated for 600 lb-ft of torque Fits all small block Chevy engines, including 383 stroker, with two-piece rear main seal Matched performance 11-inch clutch and pressure plate supports 550 HP 168-tooth billet steel flywheel is compatible with stock or aftermarket starter Steel bellhousing and hydraulic clutch release bearing simplify installation Kit includes clutch, flywheel, and bellhousing bolts, pilot bearing, and more Everything You Need to Bolt Up a Modern 5-Speed to Your 1985 and Older Engine Nothing says “muscle” like a manual shifter lever poking up through a car’s center console. “Rowing your own” is a rite of passage and a manual transmission is certainly the preferred transmission in the tunnel of a typical muscle car, hot rod, or even a souped up classic truck. That said, it isn’t always easy to figure out how to get a modern 5-speed (or 6-speed) manual bolted up to your engine of choice. Varying flywheel specs, engine balances, and more all create confusion as to what really fits and works best. That is why we have put together a whole series of small block Chevy manual transmission option conversion kits for the most popular engine applications in use today. We take the guesswork out of which clutch to buy, what length fasteners are needed, and so much more with each of our transmission installation kits. Each kit features a modern Tremec 5-speed or 6-speed manual transmission, a steel bellhousing, performance clutch kit (disc, pressure plate, and flywheel), along with a hydraulic release bearing, pilot bearing, fasteners, and more to easily mate it to your favorite engine with no issues or forgotten parts. Simply add the appropriate to your order and you’ll have everything you need to mount your transmission to your engine and into your chassis. Tremec’s TKX 5-Speed Manual Transmission Is Proven Tough with Versatile Shifter Options Our 1985-older SBC manual transmission swap kit features the Tremec TKX 5-speed manual transmission as the main component. The TKX is extremely popular due to its end loading case design, which makes the overall dimensions of the transmission smaller. This allows for a better fit in a larger number of applications without having to modify the transmission tunnel of the vehicle. Furthermore, the three available shifter positions (two of which can use the included short throw billet shifter assembly simply by reversing the shifter body) allow for the shifter to use the stock shifter lever opening in your floor. Just add your choice of bolt-on . Dual speedometer pickups, one manual and one electric, means no matter what speedometer you are using you can easily connect it to the TKX. The TKX’s 600 lb-ft of torque capacity, coupled with high rpm shift ability means no missed shifts. Built in backup light switch (with wiring pigtail included) means not having to mess with external plunger-style backup light switches commonly found with older manual transmissions. The Tremec TKX in our 5 speed conversion kit features wide gear facings with sintered bronze and carbon synchronizers not only increase the torque capacity over the older (and larger) Tremec TKO-500 but provide for buttery smooth shifts up to 7,500 rpm! To further strengthen the transmission and support its 600 lb-ft torque capacity, the TKX ships with a 26-spline input shaft and output shaft. The Tremec TKX uses 2.7 quarts of Dexron III/Mercon spec and is easily serviced via the fill and drain plugs located on the passenger side of the transmission case. Tremec builds the TKX with a 2.87 First gear ratio and a street friendly .68 Fifth gear/OD ratio. The overdrive ratio provides exceptional fuel mileage even with steep rear gears. For example, fitting 4.10 gears using the .68 overdrive is equivalent to having just a 2.73 gear ratio! Have some fun in First through Fourth and then hit Fifth for some fuel economy you never thought your ride would be capable of. A Performance Clutch Package Constructed to Handle Up To 550 Horsepower When you’re bolting up one of these high performance modern overdrive SBC manual transmission options you want to do the job once and not have to pull the transmission back out because someone recommended the wrong clutch. This is why we put together our manual transmission swap kit with a ton of research on the best parts that compliment each other. For example, the included McLeod Super Street Pro clutch kit. This diaphragm style clutch kit features a 11-inch dual faced (organic and metallic) clutch disc and matching high clamp load pressure plate that supports up to 550 hp with smooth engagement. The billet steel flywheel works with any 1985 and older small block Chevy with two-piece rear main seal, including 283, 305, 307, 327, 360, 400, and 383 stroker variant. Its 168-tooth ring gear is compatible with both stock and aftermarket performance starters. The whole assembly works perfectly with the included Lakewood steel bellhousing and hydraulic clutch release bearing kit provided. Low Profile Steel Bellhousing and Hydraulic Release Bearing Provide Ample Clearance More traditional style mechanical or even cable activated clutch linkages rely on a series of connecting linkages, mounting brackets, and a clutch fork with throwout bearing. All of this becomes a packaging issue when it comes to small block Chevy engine swaps in a chassis that never had a manual transmission. Mounting a or hydraulic clutch pedal and 3/4-inch bore is a lot easier than trying to fab a mechanical clutch linkage or route a clutch cable through your exhaust system. Our hydraulic clutch throwout bearing is easy to setup and provides a light pedal effort that is easy to modulate. The final piece of our 5 speed conversion kit puzzle is Lakewood’s excellent small block Chevy steel bellhousing. This heavy gauge steel bellhousing provides additional safety and strength. Suitable for use with hydraulic clutch release bearings or traditional clutch fork with pivot stud, the included hydraulic release bearing provides more under car clearance for exhaust routing. The hydraulic clutch line (and optional ) enters the bellhousing through the clutch fork opening, requiring no modifications to the bellhousing. Add Lakewood’s to keep road grime and rain out of the clutch housing and support the clutch release bearing’s hydraulic line. Add in the little things that can be frustrating to find or are often forgotten about until you are “mid installation” like clutch and bellhousing bolts, pilot bearing, backup and neutral switch wiring pigtails, and so forth and you can see why our transmission installation kit will save you time and frustration. Installation Tips You will need to order the separately. We recommend checking and confirming bellhousing alignment with a dial indicator and installing to correct any misalignment. Tremec TKX gear ratios: 1st: 2.87, 2nd: 1.89, 3rd: 1.28, 4th: 1.00, 5th: 0.68, Reverse: 2.56 Designed for 1985 and older two-piece rear main seal small block Chevy engines (283, 305, 307, 327, 350, 400 and 383 stroker). Will not fit 1986 and up one-piece rear main seal small block Chevy engines. Specs Sold in Quantity Kit Yoke Style Slip On Transmission Speeds 5-Speed Input Shaft Spline Count 26 Output Shaft Spline Count 31 Case Material Aluminum First Gear Ratio 2.87:1 Gear Ratio (2nd) 1.89:1 Gear Ratio (3rd) 1.28:1 Gear Ratio (4th) 1.00:1 Gear Ratio (5th) 0.68:1 Torque 600 ft./lbs. Yoke Included No Bellhousing Included Yes Shifter Included Yes Number of Gears Five MFG. Part # 91029036 Gear Ratio (Reverse) 2.56:1 Related Items / Suggested Parts SBC 85-older Tremec T56 6 Speed Transmission Install Kit, 700 HP Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 4396.99 USD

Location: Lincoln, Nebraska

End Time: 2024-12-14T13:02:01.000Z

Shipping Cost: N/A USD