TELTONIKA 4G LTE Cat 4 Industrial Cellular Router RUT200 IEEE 802.11b/g/n RMS

Description: Features:// RUT200 brings the top-rated features of our all-time bestseller RUT240 and is compatible with networks in Asia, CIS, the Middle East, Africa, and South America.// Equipped with 4G LTE, Wi-Fi, and two Ethernet ports, this model is perfect to quickly set up primary and backup connectivity with remote management capabilities.// Due to its compact size, industrial design, and I/Os, this model is very suitable in manufacturing, automation, transportation, and other industrial application scenariosSpecification:MOBILEMobile module: 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps3GPP Release: Release 9Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCIDSMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPPUSSD: Supports sending and reading Unstructured Supplementary Service Data messagesBlack/White list: Operator black/white listMultiple PDN: Possibility to use different PDNs for multiple network access and servicesBand management: Band lock, Used band status displayAPN: Auto APNBridge: Direct connection (bridge) between mobile ISP and device on LANPassthrough: Router assigns its mobile WAN IP address to another device on LANWIRELESSWireless mode: IEEE 802.11b/g/n, Access Point (AP), Station (STA)WiFi security: WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separationSSID/ESSID: SSID stealth mode and access control based on MAC addressWiFi users: Up to 50 simultaneous connectionsWireless Hotspot: Captive portal (Hotspot), internal/external Radius server, built in customizable landing pageETHERNETWAN: 1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIXLAN: 1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIXNETWORKRouting: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsConnection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspectionFirewall: Port forward, traffic rules, custom rulesDHCP: Static and dynamic IP allocation, DHCP Relay, RelaydQoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11eDDNS: Supported >25 service providers, others can be configured manuallyNetwork backup: WiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic FailoverLoad balancing: Balance Internet traffic over multiple WAN connectionsHotspot: Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themesSSHFS: Possibility to mount remote file system via SSH protocolSECURITYAuthentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts blockFirewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-TAttack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)VLAN: Port and tag based VLAN separationMobile quota control: Custom data limits for SIM cardWEB filter: Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites onlyAccess control: Flexible access control of TCP, UDP, ICMP packets, MAC address filterVPNOpenVPN: Multiple clients and a server can run simultaneously, 27 encryption methodsOpenVPN Encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256IPsec: IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)GRE: GRE tunnel, GRE tunnel over IPsec supportPPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec supportStunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s codeDMVPN: Method of building scalable IPsec VPNsSSTP: SSTP client instance supportZeroTier: ZeroTier VPN client supportWireGuard: WireGuard VPN client and server supportTinc: Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.MODBUS TCP SLAVEID range: Respond to one ID in range [1;255] or anyAllow Remote Access: Allow access through WANCustom registers: MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionalityMODBUS TCP MASTERSupported functions: 01, 02, 03, 04, 05, 06, 15, 16Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)MODBUS DATA TO SERVERProtocol: HTTP(S), MQTT, Azure MQTTMQTT GATEWAYMQTT Gateway: Allows sending commands and receiving data from MODBUS Master through MQTT brokerDNP3Supported modes: TCP Master, DNP3 OutstationMONITORING & MANAGEMENTWEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel logFOTA: Firmware update from server, automatic notificationSSH: SSH (v1, v2)SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GETCall: Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, WiFi on/offTR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystemMQTT: MQTT Broker, MQTT publisherSNMP: SNMP (v1, v2, v3), SNMP TrapJSON-RPC: Management API over HTTP/HTTPSMODBUS: MODBUS TCP status/controlRMS: Teltonika Remote Management System (RMS)IOT PLATFORMSCloud of Things: Allows monitoring of: Device data, Mobile data, Network info, AvailabilityThingWorx: Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network TypeCumulocity: Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal StrengthAzure IoT Hub: Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection typeSYSTEM CHARACTERISTICTSCPU: Mediatek MIPS 24Kc 580 MHzRAM: 128 MB, DDR2FLASH storage: 16 MB, SPI FlashFIRMWARE / CONFIGURATIONWEB UI: Update FW from file, check FW on server, configuration profiles, configuration backupFOTA: Update FWRMS: Update FW/configuration for multiple devices at onceKeep settings: Update FW without losing current configurationFIRMWARE CUSTOMIZATIONOperating system: RutOS (OpenWrt based Linux OS)Supported languages: Busybox shell, Lua, C, C++Development tools: SDK package with build environment providedINPUT / OUTPUTInput: 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic highOutput: 1 x Digital Output, Open collector output, max output 30 V, 300 mAEvents: Email, RMS, SMSI/O juggler: Allows to set certain I/O conditions to initiate eventPOWERConnector: 4-pin industrial DC power socketInput voltage range: 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us maxPoE (passive): Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 - 50 VDCPower consumption: < 6.5 W MaxPHYSICAL INTERFACESEthernet: 2 x RJ45 ports, 10/100 MbpsI/O’s: 1 x Digital Input, 1 x Digital Output on 4-pin power connectorStatus LEDs: 3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LEDSIM: 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holderPower: 1 x 4-pin power connectorAntennas: 2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectorsReset: Reboot/User default reset/Factory reset buttonPHYSICAL SPECIFICATIONCasing material: Aluminium housing, plastic panelsDimensions (W x H x D): 83 x 25 x 74 mmWeight: 125 gMounting options: Bottom and sideways DIN rail mounting slotsOPERATING ENVIRONMENTOperating temperature: -40 °C to 75 °COperating humidity: 10% to 90% non-condensingIngress Protection Rating: IP30REGULATORY & TYPE APPROVALSRegulatory: CBSAFETYStandards: IEC 62368-1:2018 (CB Scheme)

Price: 155.43 USD

Location: European Union

End Time: 2024-12-21T19:41:21.000Z

Shipping Cost: 0 USD