Description: Store Home About maXpeedingrods View Feedback Contact Us Product Details T04E T3/T4 .57 A/R TURBOCHARGER TURBO TURBINE COMPRESSOR UP TO 400HP STAGE III Item Description Fit for: This item fits: Universal Application ( Modification might be required for some vehicles ) Compatible for 1.5L to 2.5L any 4/6 cylinder engine Maximum PSI 18(1.2Bar) Specific: Turbine Intake Flange: T3 T4 4 bolt Flange Patterns Turbine Exhaust Flange: Standard T3 5 bolt flange pattern Wastegate: w/o Wastegate Compressor Trim: 48.1 Compressor A/R: 0.5 Compressor Inducer: 52.7mm Compressor Exducer: 76mm Turbine Trim: 74.2 Turbine A/R: 0.57 Turbine Inducer: 64.8mm Turbine Exducer: 55.8mm Turbine exhaust inlet: 45mm/87mm Compressor outlet: 42mm (inside diameter) , 52mm(Outer diameter) Compressor inlet: 68 mm (inside diameter), 77mm(Outer diameter) Oil Inlet: M12*1.25 Oil Outlet: 2*M8*1.25 Cooling Type: Oil Cooled Bearing Type: Floating Bearing/Journal Bearing Trust Bearing: 270 degree Hosepower: Up to 400+HP Turbo Type: Individual Universal Fitment: Yes Finish: Matte Condition: Brand New Product Size:23x 22x 18 cm Package Weight: 7620g Key Features: *Product Material 1. Turbine housing: Ductile iron QT450-10 - temperature resistant up to 700℃ 2. Steel turbine wheel: K418 alloy - high oxidation stability and resistance up to 900℃ 3. Compressor housing: L104 aluminum with lightweight 4. Compressor wheel/blades: Cast aluminium blades – superior air tightness & corrosion resistance *Product Features 1. Cost-effective turbo increase 20-40% power for your car 2. Rich experience in turbo production and own factory 3. High-Speed oil seal ring and Precision clearance 4. Built for durability and strength * Technology Advantage: 1. 100% balancing Test by TURBOTECHNICS VSR3 2. G3-min-Flow VNT Turbo testing 3. Advanced Actuator Tester/Programmer Tips before installing: 1.Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. 2.Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. 3.After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. NOTE: * Replace, repair or reconnect air cleaner element per manufacturers manual to avoid compressor wheel damage. * Make sure the oil drain line is lower than the turbo itself. * Ensure exhaust outlet are well sealed by welding * The degree of modification of the universal turbo depends on your individual vehicle. * Professional installation is highly recommended. * This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order. * Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated (e.g. insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc.)! Other items you might also like About MaXpeedingrods Shipping Policy Returns Policy
Price: 115.99 USD
Location: Dayton, New Jersey
End Time: 2024-08-31T02:43:13.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Application: for 1.5L to 2.5L any 4/6 cylinder engine
Brand: maXpeedingrods
California Prop 65 Warning: California Prop 65 Warning
Compressor A/R: 0.5
Compressor Inducer /Exducer (MM): 50.50 / 76.00
Compressor Trim: 44
Cooling Type: Oil Cooled
Features: Individual
Finish: Matte
Interchange Part Number: T04E,T3,T4
Manufacturer Part Number: HDNBY3
Manufacturer Warranty: 2 Year
Materials: Cast Iron/Steel Turbo Housing/ Aluminum Controller
Note2: This is universal application turbo,, so modification might be required for some vehicles
OE/OEM Part Number: Universal Turbocharger for 1.5L to 2.5L any 4/6 cylinder engine, T3 T4 T04E Turbo, turbocharger t3/t4, turbo t3 t4, t3 t4, 57 trim turbo, Turbo,Turbocharger,Turbocharger,Turbolader,Turbocompresor, Turbine,Universal Turbo, turbosuperchargers,Aftermarket Turbo, Boost Up to 400+HP
Oil Inlet: M12*1.25
Oil Outlet: 2*M8*1.25
Performance Part: Yes
Superseded Part Number: universal turbo, t04e turbocharger
Trust Bearing: 270 degree
Turbine A/R: 0.57
Turbine Exhaust Flange: Standard T3 5 bolt flange pattern
Turbine Inducer / Exducer (mm): 65.50 / 55.90
Turbine Intake Flange: T3 T4 4 bolt Flange Patterns
Turbine Trim: 73
Type: Turbocharger
Universal Fitment: Yes
