Description: The Syntron F-T01-A Feeder assembly is an electromagnetic unit, consisting of a dynamically balanced, two-mass vibrating system. This system consists of a trough and trough connecting bracket coupled to an electromagnetic drive by means of leaf springs. NOTE: When supplied without a trough assembly, the drive unit can be used with chutes, tracks, etc. (supplied by the customer). The drive (a coil and core assembly) is located within the base housing and is connected directly to the rear of drive unit housing. An armature assembly, also included as part of the drive unit, is located opposite the core and coil and is connected directly to the trough connecting bracket. The springs are 2 clamped at the bottom to the drive unit housing, at the top to the trough connecting bracket. The trough, trough connecting bracket and armature become an assembly, joined to the drive unit through the spring assemblies. Model F-T01-A Feeder operation produces a vibrating stroke on the surface of the feeder trough. The stroke is obtained by the electromagnet pulling the trough sharply down and back and then allowing it to spring up and forward. Repeated at high speeds (3600 v.p.m. at 60 cycle power supply), this action produces a definite vibrating movement on the trough surface. The F-T01-A Feeder requires the use of separate control which contains a rectifier (SCR), used to convert alternating current into rectified current. Service Instructions are included with the control. Figure 1 illustrates a typical a-c sine wave and a typical r-c sine wave (the type of pulsating current which is required to operate the feeder). The coil is energized only by the portion of the sine wave shown as a solid line of the r-c sine wave. The broken line represents the portion of the sine wave which is blocked by the rectifier. The blocked portion does not reach the feeder coil and during this time the feeder coil is de-energized. When the coil is energized, the core becomes magnetized and attracts the armature assembly. This pulls the armature, trough mounting bracket and trough down and back towards the core. This pull is against the mid-point of the leaf spring stack, flexing the springs.
Price: 2200 USD
Location: Chico, Texas
End Time: 2024-01-25T14:53:19.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Syntron
MPN: F-T01-A
