Synthrotek Five Amp - Eurorack Power Supply Module

Description: The Five Amp is a throwback to our original 5A Power Supply with some upgrades. It uses a quality 12V brick for the +12V power regulation instead of a +12V converter. The plus side of doing it this way is that whatever amperage the -12V and +5V rails are not using can be used by the +12V rail, which always draws the most of the three.Five Amp comes in three different power configurations. We recommend selecting an option based upon your -12V rail draw. For a rule of thumb, Red (with red LEDs) will power a single row of 84 or 104HP, Green will power two rows of 104HP, and Blue will power three to four rows of 104HP.Features:Multiple power options to fit your needs and budget:RED: Power one row of 104HP.*GREEN: Power two rows of 104HP.*BLUE: Power three to four rows of 104HP.*Advanced low-noise, fully-regulated voltage converters on the -12V and +5V railOver-current protection: shuts off each power rail automatically if modules use too much current on that railTwo 16-Pin Eurorack power connectors, keyed for safetyMolex quick-release connector for easy install of Synthrotek Noise Filtering Distribution BoardsUSB jack for powering an iPhone, Beat Step Pro, etc.Requires 12V power brick (input voltage 12V), DC Input Jack size: 2.1mmModule Width: 4HPModule Depth: 46mm*Wondering how much power your modules will need? Check out ModularGrid. You can add all your modules to a virtual case and find out your estimated power consumption.

Price: 94.99 USD

Location: Pullman, Washington

End Time: 2023-12-11T22:02:06.000Z

Shipping Cost: N/A USD