Suzuki Valve Cover Gasket fits GS1000 & GS1000

Description: VALVE COVER GASKET – SiliconefitsSUZUKI GS 1000, 1100 – Our silicone rubber gaskets are made from aerospace mechanical grade AMS silicone and designed to withstand temperatures up to 400 degrees Fahrenheit. – Therefore, they will not break down and deform or crack up like cork or neoprene. – Our gaskets seal uneven and warped surfaces and eliminate corrosion. – Gaskets are 100% reusable.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fits Models: SUZUKIGS 1000 1979: N, LN, SN 1981: G, GLGS 1100 1982: G, GK, GL 1983: G, GK, GL Part #: RG-11173-49020Corresponding part #’s: OEM #11173-49020, 11173-49021, 11173-490221 gasket19 Bolt Hole Silicone Gasket. (Be sure to count your bolt holes to be sure of proper fit.)Gasket is 1/16″ thick siliconeReusable INSTALLATION INSTRUCTIONS: Wash the cover and cylinder with solvent. Remove all traces of oil. The surfaces must be DRY (NO OIL or lube of any type). TORQUE SPECIFICATIONS: Torque to 15 inch pounds DO NOT OVER TIGHTEN! If you do, it causes the gasket to bulge or "pooch" out. - If the gasket starts to bulge or "pooch" out when torqueing - then you are over tightening the gasket. Back off on the torque. - If the gasket splits or cracks then you have over - torqued the silicone material and ruined the gasket. You must follow the recommended torque listed on the package. Tighter is not better. - It is okay to use Loctite on the bolts. TO REUSE GASKET: Wash gasket briefly in hot water and soap. Rinse gasket and dry thoroughly. Re-install gasket using the above installation instructions. PROUDLY MADE IN THE USA.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ USE CORK? GET REAL! REAL Gaskets that is… REAL Gaskets Tennessee is a manufacturer of silicone rubber gaskets for aircraft, automobile, and motorcycle engines. Our silicone rubber gaskets are made from aerospace mechanical grade AMS silicone, designed to withstand temperatures up to 400 degrees Fahrenheit and to last the life of the engine. Our gaskets seal uneven surfaces, eliminate corrosion and are 100% reusable. We manufacture valve cover gaskets for: Aircraft: Continental, Franklin, Lycoming, Pratt & Whitney and Wright radial piston aircraft engines. Automobiles: Ford, GM, Mopar, Porsche and VW automobile engines. Motorcycles: BMW, Harley-Davidson, Suzuki, BSA, Ducati, Moto Guzzi, Norton, Triumph, Saab and most other motorcycle engines. If you are tired of oil leaks, then a silicone rubber gasket is the only way to go, and REAL Gaskets Tennessee is the only place you can get “The Original” silicone rubber gasket. MADE IN THE USA.

Price: 25 USD

Location: Elizabethton, Tennessee

End Time: 2025-01-02T21:12:27.000Z

Shipping Cost: 12.95 USD