Vibox

Stock / OEM Upper & Lower Control Arms - 2003-2009 Dodge Ram 2500/3500 4WD

Description: Tubular Steel Control Arms for Stock / 0-1.5" Lift Height2003 to 2009 Dodge Ram 2500/3500 4WD Stryker Off Road Designs' DOM (Drawn Over Mandrel) Control Arms! These are CAD designed craftsman Welded fabricated control arms. They are designed to fit the front of a Dodge Ram 1500 2500 3500 4x4. Check your lift height. We have models designed to fit Stock to 7" lift height. These WILL fit the 1500 Megacab 4x4 as well.This is for a set of 4, includes 2 uppers and 2 lowers. They definitely allow the best tire fitment as it re-centers the axle in the wheel well. These are sold in a set of 4, because you really need uppers AND lowers to re-center your axle properly. If you've installed a leveling kit, you DEFINITELY need longer control arms! This is because as you lift the truck, the angle on the arms increases, pulling it back in the wheel well. If you've installed a 2-3" leveling kit or a lift kit and your front tires are close to rubbing the fenders near your doors, you need longer arms to properly re-center your axle! Our ARMS are guaranteed to perfectly fit your year model truck (year models have different sizes of hardware, requiring different inner diameter sleeves for optimal fitment). Some competitors save cost by designing only ONE size and selling you a kit full of spacers, shims or washers for you to make up for their reduced investment in your model truck. Some of these lower cost competitors buy their "One Size Fits All" arms from China. Stryker is proud of our MADE IN THE USA sourcing. If you see a kit with lots of extra parts you might consider one exclusively designed for your truck.Some lower cost competitors may also use cheaper rolled sleeves with a seem can split apart, due to stress from movement (see comparison images), shredding your bushings from within! Many competitors even use lower cost Rubber Bushings.These arms are precisely the proper length to center your front axle within the wheel well at stock to 1 1/2", 2-3", 3 1/12" to 5" and 5 1/2" to 7" lift height - Each arm is jig-built, using precisely measured materials, and is inspected before being shipped. Buy with confidence! That's correct, Stryker designs and manufacturers a Fabricated control arm to match your truck. In OUR world of Rugged Style ONE SIZE DOES NOT FIT ALL TRUCKS! Stryker is confident in offering you a LIFETIME WARRANTY on our DOM control Arms because the Quality of the Engineered Design, Materials used, Manufacturing Process, Finishing and Final Inspection WARRANT ONE!CAD Designed for your HEAVY DUTY TRUCK.Our heavy wall (Drawn Over Mandrel) DOM sleeves will exceed the requirements of your Dodge Heavy Duty truck!Daystar PTMEG poly bushings to outperform the lower cost RUBBER used in most competitors offerings (including the OEM arm).We also use DOM (Drawn OVER MANDREL) Steel Sleeves to manage the lifetime wear these arms will endure.Stryker's Craftsman Welders build these in HOUSE here in Marysville, TN!Powered Coated in the USA under strict Stryker oversight and inspection.Threaded ZERK fittings for a lifetime of optimal performance!And designed for the EXACT Truck Model, Year and Lift Height to ensure all the measurements AND Components MATCH the requirement. Not a bunch of spacers and shims to make some competitors ONE SIZE FITS ALL offerings kind of fit your truck.Benefits:LIFETIME Replacement Warranty! (excludes powder coat)Properly centers front axle within wheel wellStronger than factory stamped steel armsBeefy tubular steel construction w/ DOM collarsStryker's Craftsman Welders build these in HOUSE here in Marysville, TN!Daystar brand PTMEG poly bushingsYear-model-specific DOM sleevesGreaseable 1/4" screw-in zerk fittingsMade in the USA! Description: Our strong tubular steel construction control arms are the perfect upgrade to the factory stamped steel control arms. Including heavy wall DOM sleeves, custom-designed Daystar brand PTMEG poly bushings, and pre-installed zerk fittings, these arms come completely ready to install - Just remove your factory arms and bolt these right in! Our heavy wall DOM sleeves are application specific, and guaranteed to perfectly fit your year model truck (year models have different sizes of hardware, requiring different inner diameter sleeves for optimal fitment). Cheaper rolled sleeves with a seem can split apart, due to stress from movement (see comparison images), shredding your bushings from within! These arms are precisely the proper length to center your front axle within the wheel well at Stock / 0-1.5" lift height - Each arm is jig-built, using precisely measured materials, and is inspected before being shipped. Buy with confidence! Kit Contents: (2) Upper Control Arms (2) Lower Control Arms(8) zinc plated 90 degree zerk grease fittings - customer assembly required(2) Includes two unaffixed vinyl flag decals - requires customer application Fitment: 2003 to 2009 Dodge Ram 2500/3500 4WD Technical Notes: fits all Mega Cab models; Re-uses factory hardware

Price: 269.95 USD

Location: Maryville, Tennessee

End Time: 2024-11-14T14:31:21.000Z

Shipping Cost: 0 USD

Product Images

Stock / OEM Upper & Lower Control Arms - 2003-2009 Dodge Ram 2500/3500 4WDStock / OEM Upper & Lower Control Arms - 2003-2009 Dodge Ram 2500/3500 4WDStock / OEM Upper & Lower Control Arms - 2003-2009 Dodge Ram 2500/3500 4WDStock / OEM Upper & Lower Control Arms - 2003-2009 Dodge Ram 2500/3500 4WDStock / OEM Upper & Lower Control Arms - 2003-2009 Dodge Ram 2500/3500 4WDStock / OEM Upper & Lower Control Arms - 2003-2009 Dodge Ram 2500/3500 4WDStock / OEM Upper & Lower Control Arms - 2003-2009 Dodge Ram 2500/3500 4WDStock / OEM Upper & Lower Control Arms - 2003-2009 Dodge Ram 2500/3500 4WD

Item Specifics

Restocking Fee: 20%

Return shipping will be paid by: Buyer

Returns Accepted: Returns Accepted

Item must be returned within: 14 Days

Refund will be given as: Money Back

OE Spec or Performance/Custom: Performance/Custom

Kit Parts Included: Control Arm

Other Part Number: CRMDOM0003DGTTAABE1

Warranty: Lifetime Replacement - excludes powder coat

Greasable or Sealed: Greasable

Manufacturer Part Number: CRMDOM0003DGTTAABE1

Kit or Single Part: Kit

Lift Height: Stock

Adjustable: No

Placement on Vehicle: Front

Brand: Stryker Off Road Design

Included Hardware: Sleeve, Bushing

Country/Region of Manufacture: United States

Recommended

Dual Steering Stabilizer with FOX L4 Shocks Ram 2013-2024 3500, 2014-2024 2500
Dual Steering Stabilizer with FOX L4 Shocks Ram 2013-2024 3500, 2014-2024 2500

$649.95

View Details
FOX 2.0 Reservoir V1 Dual Steering Stabilizer 2023 to 2024 Ford F450 F550 SD 4WD
FOX 2.0 Reservoir V1 Dual Steering Stabilizer 2023 to 2024 Ford F450 F550 SD 4WD

$939.00

View Details
1-6" Adjustable Upper  Lower Control Arms fits Dodge Ram 2010-2013 2500/35004WD
1-6" Adjustable Upper Lower Control Arms fits Dodge Ram 2010-2013 2500/35004WD

$319.95

View Details
Bilstein V1 Dual Steering Stabilizer for 2008-2016 Ford F450 F550 Super Duty 4WD
Bilstein V1 Dual Steering Stabilizer for 2008-2016 Ford F450 F550 Super Duty 4WD

$499.95

View Details
Adjustable Control Arms 2000 - 2009 Dodge Ram 2500 3500 4WD for 1" to 6" Lift
Adjustable Control Arms 2000 - 2009 Dodge Ram 2500 3500 4WD for 1" to 6" Lift

$319.95

View Details
ICON FIELD ARMOR STRYKER KNEE CE IMPACT PROTECTOR ONE SIZE FITS MOST USED
ICON FIELD ARMOR STRYKER KNEE CE IMPACT PROTECTOR ONE SIZE FITS MOST USED

$39.00

View Details
Bilstein Dual Steering Stabilizer for 2017-2022 Ford F450/F550 Super Duty 4WD
Bilstein Dual Steering Stabilizer for 2017-2022 Ford F450/F550 Super Duty 4WD

$499.95

View Details