Vibox

Square Hand Brace Adapters for Auger Boring Bits w/ 1/4" 9 mm & 7/16" Shafts

Description: The hand brace is an essential and versatile tool that should be in every shop. In many instances, a hand brace can bore holes to precise angles and depths more easily and more accurately than a cordless drill. The problem with using a hand brace is the choice of quality square shank bits is quite limited. Used vintage bits can be found at swap meets or online, but quality can be quite variable and they will likely need sharpening. New bits can be quite quite expensive or quality is poor or inconsistent.Then, we discovered WoodOwl Tri-Cut Ultra Smooth Auger Bits. These bits cut with less effort than any bit we tested and produced smooth holes with minimal to no blowout. Plus, these bits were very reasonably priced. The only barrier to using WoodOwl bits was the 7/16” hex shaft did not interface with most brace chucks. So, we had an adapter made to address this problem. Our adapter has one end with a round hole that accepts 7/16” hex shanks and the other end is square and tapered and fits perfectly in any hand brace chuck. Bits are secured in place via a T knob. Adapter comes with just one knob. This adapter will allow use of any WoodOwl Tri-Cut Ultra Smooth bit in your hand brace. 100% made in the USA! Specs for 7/16" round hole adapter:Precision turned on a CNC lathe from tool steelShaft is round and not hex Overall length: 4.25”Depth of hole: 1.25”Outside diameter: .75”10-32 x 3/8" T knob with stainless steel threads Distance of screw hole from end: .625”Blackened gun metal finish We also carry 2 additional imported sizes to fit 1/4" (6.35mm) and 3/8" (9mm) hex shaftsAdapter that accepts 1/4" (6,35mm) hex shafts: Hex holeDepth of hole: .820" Screw position: .275: from end Outside diameter: .550"Overall length: 4.5" Chrome finishSecured with round knurled blackened steel knob Adapter that accepts 9mm hex shafts:Hex holeDepth of hole: .820" Screw position: .275: from end Outside diameter: .670"Overall length: 4.5" Chrome finish Secured with round knurled blackened steel knob WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Price: 12.99 USD

Location: Columbia, Missouri

End Time: 2024-10-15T19:45:33.000Z

Shipping Cost: 0 USD

Product Images

Square Hand Brace Adapters for Auger Boring Bits w/ 1/4" 9 mm & 7/16" ShaftsSquare Hand Brace Adapters for Auger Boring Bits w/ 1/4" 9 mm & 7/16" ShaftsSquare Hand Brace Adapters for Auger Boring Bits w/ 1/4" 9 mm & 7/16" ShaftsSquare Hand Brace Adapters for Auger Boring Bits w/ 1/4" 9 mm & 7/16" Shafts

Item Specifics

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Return policy details:

MPN: N/A

Voltage: N/A

Model: N/A

Sanding Grade: N/A

Application: Drilling/Boring

Connection Type: N/A

Brand: Taytools

Type: Brace Adapter

Available Variations

Color: 7/16"

Price: 20.99 USD

Available Quantity: 154

Quantity Sold: 71

Color: 1/4"

Price: 12.99 USD

Available Quantity: 187

Quantity Sold: 93

Color: 9mm

Price: 12.99 USD

Available Quantity: 186

Quantity Sold: 17

Recommended

French Leather Strop Paddle 2-Sided 3" x 10" Stropping Surface Beech Handle
French Leather Strop Paddle 2-Sided 3" x 10" Stropping Surface Beech Handle

$29.99

View Details
Taytools 4 Piece Set 1 Zero Flute Countersink Chamfering Tools Wooden Box 467252
Taytools 4 Piece Set 1 Zero Flute Countersink Chamfering Tools Wooden Box 467252

$32.99

View Details
2 Each Pair Taytools 12" Machinist Ruler Rule 4R (8th 16th 32th 64th) Stainless
2 Each Pair Taytools 12" Machinist Ruler Rule 4R (8th 16th 32th 64th) Stainless

$10.99

View Details
Taytools 1.2 Ounce Bar Green Chromium Oxide Micro Fine Stropping Polishing x2
Taytools 1.2 Ounce Bar Green Chromium Oxide Micro Fine Stropping Polishing x2

$10.99

View Details
Taytools Micrometer Stand Cast Iron Base Rubber Lined Jaws 731936
Taytools Micrometer Stand Cast Iron Base Rubber Lined Jaws 731936

$24.99

View Details
Taytools 10" Wooden Hand Screw Clamp Kit with Rods, Pivot Nuts and Handles
Taytools 10" Wooden Hand Screw Clamp Kit with Rods, Pivot Nuts and Handles

$31.49

View Details
Taytools Machinist Solid Square 2.5 ” DIN 875/0 (w/in 0.0003”) Stainless 7464244
Taytools Machinist Solid Square 2.5 ” DIN 875/0 (w/in 0.0003”) Stainless 7464244

$17.99

View Details
French Gimlet Blackened Finish 7 Pc Boring Tool Set 2-5mm or 5/64"-3/16" 467900
French Gimlet Blackened Finish 7 Pc Boring Tool Set 2-5mm or 5/64"-3/16" 467900

$19.99

View Details
Taytools Improved Moxon Vise Hardware Kit with 12" 3/4-10 Threaded Rods
Taytools Improved Moxon Vise Hardware Kit with 12" 3/4-10 Threaded Rods

$59.99

View Details
Taytools T Bolt for Jig Fixture & T Track 1/4-20 Thread 2-1/2" & 3-1/2" 10 Piece
Taytools T Bolt for Jig Fixture & T Track 1/4-20 Thread 2-1/2" & 3-1/2" 10 Piece

$10.99

View Details