Spyderco Paramilitary Para 3 PM3 Custom Titanium 7pc BLUE Anodized Screw Set

Description: Also available in other custom anodized colors. Just contact me if interested. FREE WORLDWIDE DELIVERY INCLUDED !!! Up for sale is a ... Custom 7 Piece BLUE Anodized Titanium Torx Screw Set to fit Spyderco Para 3 (PM3) Series Knives. (Won't fit the PARA 3 Light Weight Versions - C223PBK) The factory standard torx screws are not titanium. They might get rounded, threaded or simply get lost over time. Upgrade the standard torx screws, to a set of rust proof Custom Titanium Torx Screws anodized in BLUE. These Custom Titanium Torx screws are a direct replacement for the Spyderco Para 3 knives. These custom parts are not designed to fit Cloned or Fake Spyderco knives. Do not buy these parts for any cloned or fake knives as they probably won't fit. Might also not fit aftermarket scales if they are not the same dimensions as the factory scales. Please note: No knives pictured are for sale. What is included in this sale is only the 7 piece set of Titanium Screws to fit the original Spyderco Para 3 (PM3) knife. Consisting of only 7x BLUE Anodized screws in total. This 7 Piece set includes the following titanium screws: 2 x T10 Torx BLUE Titanium Pivot Screws 2 x T8 Torx BLUE Titanium Body Screws 3 x T6 Torx BLUE Titanium Pocket Clip Screws (longer versions also available, just ask) DECEMBER 2018 UPDATE: WAS OUT OF STOCK DUE TO SELLING OUT. THEN DECIDED TO RE-DESIGN THE SET AGAIN TO BE STRONGER. POCKET CLIP SCREWS ARE NOW UPGRADED AND NOW STRONGER!!! Many wasted parts, lots of wasted tooling, much headaches. These custom Spyderco parts have taken around 7 Generations and at least 4 years to get it to this stage. JULY 2018 UPDATE: WAS OUT OF STOCK DUE TO BEING RE-DESIGNED. PIVOT SCREWS ARE NOW STRONGER!!! Many wasted parts, lots of wasted tooling, much headaches. These custom Spyderco parts have taken around 6 Generations and at least 3+ years to get it to this stage. Previous updates...below. Please note: These custom screws were extremely hard to make. It took many production runs and a very long time to get it to this stage. This is as good as I can get it, as it is very hard to hold when machining because of the thin angled edge on the countersunk screw head. Please be aware that the screw's head may stick out from the scale by a very, very tiny little amount. As shown in the ebay photos attached. The G10 scale can be possibly countersunk a little be more to fix this. However by purchasing this set you are aware of this. (2018 UPDATE = NOW FIXED) 2018 UPDATE: These are now perfect!!! Many wasted parts, lots of wasted tooling, much headaches. It has taken around 5 Generations and at least 3 years to get it to this stage. 2017 UPDATE: These screws were machined to fit perfectly with every allowable tolerance however it was a bit too thin and caused it to break when torqued down hard. Had to scrap them and re-design. (2018 UPDATE = NOW FIXED) 2016 UPDATE: The scale screw's Torx drive head wasn't machined well. Which was very hard to do on such a small thin countersunk head = looked crap. (2018 UPDATE = NOW FIXED) 2015 UPDATE: So many trial runs and bad batches. (didn't even list it up on ebay). Many issues to sort out. (2018 UPDATE = NOW FIXED) 2014 UPDATE: Too many issues to list and remember. Much wasted $$$$$ on tooling that didn't work. (2018 UPDATE = NOW FIXED) Installation Notes: The PM3 knife can be quite tricky to take apart and put together compared to other knives. Please do not purchase this set if you are not confident in taking your PM3 apart and putting it back together. Even tuning the tightness of the PM3 body screws can effect the pivot opening performance. The original PM3 screws can be quite hard to remove. Please watch some youtube videos beforehand to see how it is done. The factory loctite thread glue can make the screws hard to get out too causing the Torx head to strip. Before installation of these titanium screws. Please clean and remove all existing factory loctite glue. Also use some Good strong quality Torx tools to (Such as Wiha Torx tools). Other Notes: Slight color and machining variations may also occur between batches. Custom colors can be requested. Other colors such as: purple, yellow, Copper, maroon, raw titanium, light blue, brass, dark blue, bronze, gold etc. Once you have received a colored titanium item. It may appear to have lost color once touched, this is just the oil from your hands. If the oil been cleaned off the color will come back. See cleaning tip below. Terms and Conditions for International Orders: If your country's language is one other than English. You will need to confirm that you understand, NO KNIVES ARE FOR SALE. International orders are sent via Airmail and usually take around 2 or 3 weeks to arrive to you once sent. However orders can take to longer to arrive depending on your country's air mailing delivery system. Please do not buy if you cannot agree to this. All International items are sent via Airmail with tracking. Sorry I have to keep repeating myself but there are many buyers especially from non English speaking countries that assume the knife is also included. I am just trying to make my listing as clear as possible that NO KNIVES ARE INCLUDED. Sorry no orders from Russia will be accepted. Orders from Italy must supply a phone number to add to the parcel and customs forms. WORLDWIDE POSTAGE IS FREE !!! I have more matching BLUE Spyderco PM3 titanium parts available. Such as: Pocket Clip Hole Protector Screws, Blade Stop Pin, Standoffs, Lanyard Tube etc. Please check my other listings or contact me for more options. (This set is also available in other colors: Brass/Bronze/Purple/Blue/Raw etc. Please contact me if interested). Anodized Titanium Cleaning Tip: To maintain the look of your new titanium parts. Wipe clean with some Acetone but at the same time be careful NOT to get Acetone on the G10 or Carbon knife scales. (Windex can also work too as a safer option) PLEASE NOTE: These custom parts may need up to 1 week lead time to process after ordering.

Price: 72.99 AUD

Location: Bayswater

End Time: 2024-08-06T17:54:35.000Z

Shipping Cost: 0 AUD