Spinalign Intersegmental (IST) Replacement Rollers

Description: Spinalign Intersegmental (IST) Replacement Rollers - Set of 3These Replacement Rollers are for the Spinalign IST Table.These Replacement Spinalign Rollers will also fit the Spinalator, ATT300, Quantum 400, & ASH7000 Tables. The NEW Design on the Spinalign Rollers are now Black in color ( hides grease better ) and they are a Higher Density Neoprene & Foam mix!The Roller Kit Includes: High Density Rollers - Qty 3Inserts - Qty 3Bolts & Nuts - Qty 3 eachReplacement Spinalign Roller Instructions Remove top from Spinalign by unclamping end brackets. Make sure hands are clear of any moving parts and turn table timer on. Elevate Roller to top height Turn Roller rotation switch OFF with one roller centered to the top of the triangle assembly. UNPLUG TABLE - Some Spinalign’s have an auto retract to lower rollers. Failure to UNPLUG table will let the roller retract automatically. This could cause bodily injury or tear up your new Spinalign rollers! This will also keep you from getting shocked if you happen to touch an exposed wire. Remove Bolt from Roller and remove old Spinalign Roller. Install new Spinalign roller. New style roller will have an easy one piece bearing and single bolt. Ensure Hands, tools, and anything else are clear of rollers then plug up table. Turn Spinalign rotation switch on and cycle roller to next top height and shut off rotation switch again. UNPLUG TABLE - Some Spinalign’s have an auto retract to lower rollers. Failure to UNPLUG table will let the roller retract automatically. This could cause bodily injury or tear up your new Spinalign rollers! This will also keep you from getting shocked if you happen to touch an exposed wire. Ensure Hands, tools, and anything else are clear of rollers then plug up table. Turn Spinalign rotation switch on and cycle roller to next top height and shut off rotation switch again. Final Roller – Repeat Process Check Chain Tension on Spinalign Roller rotation motor chain while top is removed. The Spinalign Roller tension should be like a bicycle chain; tight but not over tightened, to stretch the chain! Lube Chain with a Teflon lube. WD 40 will stop a squeak but is water based and will evaporate quickly! If you have movement in the roller after tightening chain, check Spinalign sprocket for a broken weld. Spinalign Rollers For Electric Elevation, Spinalign Rollers, Spinalign Electric Elevation Rollers, Spinalign Rollers for sale, Replacement Spinalign Rollers, Spinalign Table Roller, Spinalign Rollers

Price: 312 USD

Location: Sylacauga, Alabama

End Time: 2024-08-26T21:08:01.000Z

Shipping Cost: N/A USD