Sheartak Spiral Cutterhead for Wood-Mizer MP260 Jointer Planer bottom head

Description: Spiral Cutter Head for Wood-Mizer MP260 Planer Moulder (Bottom) with 52 Carbide Inserts Woodworkers are now experiencing the benefits of retrofitting spiral cutterheads to their old planers and jointers, including: A smoother finish with no tear-out. Each knife sits at a slight angle, producing a shear-cut that planes boards in a staggered way, resulting in a much better surface finish than a single straight cut. The combined shear and staggered cut eliminates tear-out and leaves a glossy surface finish even on highly figured hardwoods. Dramatically reduced noise as the spiral cutterhead allows a few knives to cut in a staggered way. A longer lifespan, with over 10 times the use of high-speed steel. The 15x15x2.5mm inserts are made of sintered tungsten carbide, which is much harder than high-speed steel, and each insert has four edges. Ease of use, with precision ground knives interchangeable to a tolerance of +/-0.0004" or +/-0.01mm. Simply loosen the screw, rotate 90° for a new edge, and tighten the insert in minutes. Easier dust extraction, as the spiral cutterhead produces thinner and shorter chips. Low cost to use. Spiral cutterheads produce a smoother finish, reduce or eliminate sanding work, and don't require sharpening, so your product will pay for itself in a very short time. Specifications: Material of Cutterblock: AISI 5140 high tensile strength alloy steel Material of insert: Grade C3++ or K10 Carbide insert size: 15x15x2.5mm R150 Number of inserts: 52 Number of rows: 4 Wrench size: Torx head T type The kit includes: 52 carbide inserts to be installed 5 extra carbide inserts 5 extra Torx screws 1 T-handle wrench

Price: 767 USD

Location: Waterloo, ON

End Time: 2024-11-30T16:39:44.000Z

Shipping Cost: 25 USD