SEYMOUR DUNCAN TB-4 JB Trembucker & SH-1N 59 ZEBRA 4 Conductor Pickup Set

Description: Seymour Duncan TB-4 JB Trembucker & SH-1N 59 ZEBRA 4 Conductor Pickup Set TB-4 JB Model Trembucker Bridge Summary Trembucker spaced version of the legendary JB Model that has been the ultimate hot rodded humbucker for nearly four decades. A truly modern classic. Description This is the Trembucker (F-spaced) version of the JB Model humbucker. Designed in the early 70s, the JB Model humbucker adds juice to the bridge position of any humbucker equipped instrument. With its hot coils, and alnico 5 bar magnet, this pickup delivers an unmistakable upper midrange attack, a tight, articulate low end, and harmonically rich highs that can really sing. The JB is the perfect bridge pickup for anything from blues & country to the meanest hard rock & metal. Pair with the Jazz neck model for the ultimate Hot Rodded humbucker set.Trembuckers have wider pole piece spacing, perfect for symmetrical positioning under the strings of guitars with a tremolo or wide spaced hard tail bridge (2 or wider from the center of the Low E to High E directly over the bridge pickup). Hand built in our Santa Barbara, CA factory, the JB Trembucker uses an alnico 5 bar magnet, nickel silver bottom plate, 4-conductor lead wire for multiple wiring options, and is vacuum wax potted for squeal-free performance. Output DCR:17.4Magnet:Alnico 5Cable:4c Shielded SH-1n 59 (4 conductor) Neck Summary A vintage-voiced, extremely versatile neck pickup that pairs well with most bridge humbuckers. Description The ’59 Model neck pickup is one of our most popular pickups because it’s so versatile. It’s designed in the spirit of the original P.A.F. humbuckers of the 1950s, with sweet sustain, full-sounding chords, clear and bright attack, but we’ve made a few refinements to slightly modernize the design and make it more adaptable to different styles. The ’59 has a full low end which is great for adding character to your clean sounds and sustain to your leads. The high end is slightly boosted for improved pick-attack clarity and the mids are a little scooped for an open, smooth sound that’s great for preserving the clarity of the individual notes in a chord. Play softly and the mids and highs seem to fade back, but pick hard and the note will be confident and clear. There isn’t a genre that the ’59 can’t work within. It pairs nicely with a high output bridge humbucker like the JB or Custom but is equally at home with more moderate pickups like the ’59 bridge. And it’s a popular choice for those with humbucker-routed Telecasters as well. And if you order a four-conductor version for coil splitting, its single coil mode is crystal clear. The ’59 Model neck pickup is wound on Seymour’s Leesona 102 pickup winding machine, the very one that was used in the Gibson factory in Kalamazoo, MI in the 1950s. It comes standard with a long-legged nickel silver bottom plate, vintage single conductor braided push back lead wire and no logo. Output DCR:7.6Magnet:Alnico 5Cable:4c Braided Shield Part Number: 11103-13-Z_11101-01-Z4c

Price: 208 USD

Location: Augusta, Georgia

End Time: 2024-12-11T13:34:27.000Z

Shipping Cost: 0 USD