SC-100 Acrylic Solvent Cement Adhesive

Description: Free eBay listing template designed by dewiso.com SC-100 Acrylic Solvent Cement - Pint (16 fl oz) Caseway SC-100 Solvent Cement is specially formulated for bonding acrylic to itself and other plastics such as polycarbonate, polystyrene, and CAB (cellulose acetate butyrate). It evaporates slower than SC-125 but faster than SC-94. SC-100 flows easier achieving a more bubble free joint. It will develop a strong bond within minutes and can be applied quickly with a solvent syringe, dropper, brush, or by using the soak-method. After assembly the the solvent evaporates completely leaving no residue. Typical setting time is 3 minutes, but may be longer depending on temperature and humidity. The bond strength will continue to increase over several hours. For Cementing Advantages Acrylic (All Grades)Dissimilar Materials: CAB Polystyrene - Polycarbonate • No left-over residue • Industrial Strength • Fast Setting Time • Water-Thin Directions Preparation: The surfaces to be joined should be clean and fit accurately without forcing. Apply using one of the three techniques, capillary action method, soak/dip method, or mortar joint method. The surfaces to be cemented may be left as cast, sanded (either wet or by hand), scraped, or machined. Unproper sanding, scraping, or machining may cause stress (crazing). Crazing is a network of fine cracks running on, or slightly under, the surface of plastic materials. The tendency to craze is greatly increased when the stressed material is exposed to a solvent or to solvent vapors. Edges to be cemented should not be polished since polishing usually rounds corners and creates crazing. Application: Apply SC-100 using a syringe, dropper, or brush. Press parts firmly together with a pressure of 1-3 psi. Uneven pressure may cause weak joint strength. When using the soak (or dip) method of cementing, the pieces should be assembled quickly before the cement on the surfaces of the “cushion” evaporates. Cure: Joints are usually cured for light handling in 3 minutes. A strong bond will form within hours. Large areas are more difficult to bond without bubbles and may require 8 or more hours to dry. Typical joints will reach 50 – 80% strength within 24 hours and continue to increase overtime.*It is the responsibility of the user to test the material compatibility and method used to apply this product before actual application. Shipping Ships UPS Ground only or UPS Surepost only. Orders typically ship within 24 hours (Monday - Friday). Safety SC-100 Solvent Cement will evaporate over time. Tightly cap and seal the container as best as possible. Store in the original containers in a cool, dark area away from hot surfaces, heat, sparks, flames and other sources of ignition. Store locked up in an area not accessible to children.This product is somewhat flammable and considered a hazardous material. Do not handle until all safety precautions have been read and understood. Read the product label & safety data sheet (SDS) for information on proper handling, health risks, firefighting methods, spill procedures, emergency contact information, precautionary information, disposal information & more.Wear protective gloves, protective clothing, eye protection, face protection. This product should never be used in a poorly ventilated (confined) area and without a suitable respiratory mask. This product is intended for use by experienced individuals only. Disclaimer The information, suggestions, technical data, and advice provided on this sheet are based on test results, knowledge, and experience believed to be accurate and reliable. However, all information, suggestions, technical data, and advice are not to be considered a warranty and Caseway Industrial Products, Inc. assumes no liability for any direct, indirect, punitive, incidental, special consequential damages, to property or life. Contact Caseway at any time through EBay messaging or our website for any questions, comments, or requests.

Price: 20.85 USD

Location: Munger, Michigan

End Time: 2024-12-11T16:33:15.000Z

Shipping Cost: N/A USD