Description: (S) Comparable Set. The Item for sale: Color: Matte Black QTY (1): Top/Bottom Housing Pieces Slot Filter Holders for 2" Deep Sky Filters (M48x.75) QTY (1): Spacer with hole and thread for 1.25-inch Filter (M28.5x.75).I also included a few M3 screws in case you needed them for adjusting fitment. If needed you can thread in a normal head M3 screw to the small hole on the 3DPrint part, which will bulge on the other side of the wall for tighter fitment. Do it slowly with some force applied for the M3 screw for it to thread-cut into the 3d print plastic. Over-tighten/force the screw will punch through the thin 3D print wall (~1mm thick). Then, remove the normal M3 screw, and if needed insert a headless M3 screw in place. All item is 3D Printed in Matte PLA Remember that you are screwing into 3D print plastic, so please Counter Clockwise for the thread to line up, then thread in Clockwise, and not to over-tighten. SeeStar S50Telescope, Len Filter, Stand, and paper clip NOT included. Item will ship in 1 to 2 business days. Disclaimer: ***NOTE*** Due to the 3D print nature of this product, your results may vary. Sorry, no returns or exchanges. I am NOT responsible for any damages to your EAA telescope due to the result of the use of this product ***NOTE***
Price: 11.96 USD
Location: Arlington, Texas
End Time: 2025-01-07T02:54:18.000Z
Shipping Cost: 6.67 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Unbranded
Type: DIY
