Ryobi 18v One+ 90-Degree Post Tool Holder for Wall, Pegboard, or Ryobi Link Wall

Description: Ryobi 18v One+ 90-Degree Post Tool Holder for Wall, Pegboard, or Ryobi Link Wall Rails This Tool Holder holds one Ryobi One+ Tool at a 90-degree angle and works for a wide variety of Ryobi 18-volt One+ tools (drills, drivers, inflators, flashlights, multitools, etc.). It will not hold large or oversize tools (such as blowers, saws, weed eaters, etc.). The post base is connected to wall bracket with a screw and bolt that allows it to be repositioned in 4 directions. There is a notch on 3 sides of the base to help accomodate an electrical cord for hybrid tools (see photos with the Hybrid Ryobi Project Light) white mounted. Screw and nut are included to reposition the base. Edges are mitered to be smooth and durable. The back is designed to mounted in a variety of ways including screws to the wall, pegboard* with holes at 1" on center, and Ryobi Link Wall Rails. If mounting to the wall or surface with screws, the pegs stay recessed on the back and are not used. If mounting on pegboard*, pry pegs (with a small flat screwdriver) out and push into the holes. 2 curved pegs go into the top holes pointing upward and 2 straight pegs go into the bottom holes. We recommend you superglue them into place. 2 extra pegs (one curved & one straight) and screw & nut are included. No Ryobi tools are included. * Note that there are many different types of pegboard and some may not work. This was designed to work on 3/16" thick masonite pegboard with holes at 1" (25.4mm) on center only. It is 3D-printed in black PLA plastic. It is 2.6" x 3.5" x 3.89" (66mm x 89mm x 99mm). This item is 3D Printed in PLA plastic which is made from a renewable resource. It’s biodegradable and eco-friendly. These are lightweight and due to the printing process, there may be some imperfections. 3D Printing involves the heating and depositing of material on a flat board one layer at a time. Each model is custom printed to order. I print these as a hobby and am not a large scale manufacturer. They are all printed in the USA. Please see my other listings for more designs.

Price: 16.25 USD

Location: Lexington, Kentucky

End Time: 2023-11-25T23:35:58.000Z

Shipping Cost: 0 USD