Rockville RXM-T2 Micro 2400w 2 Ch Marine/Boat Class D Amplifier 2x600W

Description: Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio Rockville RXM-T2 2400w Peak/1200w Dyno-Certified RMS 2 Channel Class D Marine Amplifier --> Click Thumbnails to Enlarge Condition and Warranty Condition: BRAND NEW IN ORIGINAL PACKAGING Warranty: 1 YEAR AUDIOSAVINGS Product Description Videos of RXM-T2: Description: The RXM-T2 is part of the Rockville proton series. This is one of the most durable marine amps in the world. It is completely water resistant! It is protected from rain, moisture, splashing, heat, cold, saltwater, vibrations, the sun, and anything else you will throw at it! The small footprint makes this durable so you can mount the amplifier even in the tightest locations. The other thing that makes this amp so durable is that it is a class "D" power supply. So even if you run it at a really low impedance the amplifier can handle it! Warning: This amplifier produces insane power! We do not want you to blow your speakers. Do not under-estimate this amplifiers' capability! If you are using this amplifier for 2 or 4 full range speakers, then please install with the gain level down all the way and then crank it up very slowly to protect your speakers from blowing. The reason we created this amplifier with so much power capability is for 2 reasons. One reason is to make it capable for powering lots of speakers per channel. Secondly was to give you enough headroom on the amplifier so you do not have to crank the gain all the way up all the time. This headroom ultimately will increase the sound quality like crazy! The RXM-T2 is rated at 1200w RMS; Dyno Certified RMS Power Ratings! This amp performs at 600 x 2 @ 2 ohms and when you bridge it you get 1200 x 1 @ 4 ohms! This is a full range class "D" amplifier. It is super-efficient. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc. We will offer a 90 day money back guarantee. If you are not happy with the output power or sound quality, we will call tag the amp back and give you all your money back! One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. RXM-T2 has (3) 35 Amp fuses. This amplifier will also go louder than most amps with this same fuse rating due to how efficiently it runs. I wanted to take a second and talk about the waterproofing process we use on this amplifier. We use a chemical compound which includes Acrylate Acid, Silicone, Polyurethane, and a few other substances. When these chemicals solidify, it becomes a protective on the PCB. This is what we call a conformal coating. This makes the amplifier water resistant. It also prevents oxidization and protects the amplifier from moisture. There are 3 ways manufacturers can conformally coat a PCB board. Soak, paint, or spray. Once we finish building the PCB board we paint it with our conformal coating. There is really no amplifier on the market that sounds this good and has this much output power at this price point. Features: Rockville RXM-T2 2400w Peak/1200w Dyno-Certified RMS 2 Channel Class D Marine Amplifier Full-Range Class D Amplifier Architecture Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc) 800 Watts (2 x 400 Watts) at 4 ohms and 1% THD+N 1200 Watts (2 x 600 Watts) at 2 ohms < 1% THD 1200 Watts (1 x 1200 Watts) bridged @ 4 Ohms < 1% THD Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2400 Watts: (2 x 1200 Watts) @ 2 Ohms and (1 x 2400 Watts) @ 4 Ohms bridged Fully marine grade amplifier with conformal-coated PCB board Protected from moisture, saltwater, UV, bumps, vibrations, heat, cold, and more Double Sided Surface Mount (SMD) PCB Design High-Speed MOSFET Power Supply Studio-Grade Bipolar Output Stage Transistors 2-Ohm Stable Stereo 4-Ohm Mono Bridgeable Mute and Delay Soft Start System Full IC-Controlled Protection Circuitry RCA Preamp Line Output Status Mode LED Indicator 8 Volt Preamp Circuitry 4 Gauge Lucite Encapsulated Power/Ground Terminals 12 Gauge Lucite Encapsulated Speaker Terminals Fully Adjustable 12dB / Octave Crossover Low Pass 50Hz - 250Hz High Pass 50Hz - 250Hz Fully Adjustable 12dB Bass Equalizer with Differential Circuitry Minimum THD at Rated Power: < 0.05% Frequency Response: 15Hz - 20KHz S / N Ratio: 100dB S/N Ratio: >97dB Damping Factor: > 200 @ 100Hz 3 x 35 Amp Fuses Dimensions: (W x H x L) 6.7" x 1.98" x 12.25" Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 1 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: RXM-T2 Home / About Us / Contact Us / Returns / FAQ's Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

Price: 159.95 USD

Location: Inwood, New York

End Time: 2023-12-03T00:57:43.000Z

Shipping Cost: 0 USD