Rockville 6 Zone Commercial Amplifier+(10) Dual 4" Black Indoor/Outdoor Speakers

Description: Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio Rockville 6 Zone Commercial Amplifier+(10) Dual 4" Black Indoor/Outdoor Speakers --> Click Thumbnails to Enlarge Condition and Warranty Condition: BRAND NEW IN ORIGINAL PACKAGING Warranty: 1 YEAR AUDIOSAVINGS Product Description Package Includes: (1) Rockville RCS350-6 350 Watt 6 Zone 70v Commercial/Restaurant Amplifier/Bluetooth (10) Rockville WET-D4 Black Dual 4" Indoor/Outdoor Commercial/Restaurant 70V Speaker How to Set up Your RCS Series of Amplifiers: Video of RCS350-6: Amplifier Remote Rack mount ears Power Cable FM Radio antenna Owner’s manual Warranty Description: Rockville is proud to introduce our new RCS series of products. The RCS350-6 is a 350 Watt 6-zone rack mountable digital hybrid amplifier/receiver. This amplifier is capable of 70 volt, 100 volt, 8-ohm, and 4-ohm applications. This makes it perfect for use in a Restaurant/Bar/Café/Lounge/School/Conference room or any other setting where many speakers are needed. This model offers 350 watts at 70 volt or 100 volt and the power can be split up into 6 zones. (Most professionals recommend you not exceed 80% of the amp power, so we recommend your speakers watt not to be more than 300 in total on the taps). Each zone can have the power split as your please. For example you can put all 300 watts into one zone with one volume control. Or you can have zone 1 with 100 watts, zone 2 with 100 watts and the rest of the zones with 25 watts each. Just add the total watts up to be under 350 and you are OK. No complex wiring required like with 8 ohm systems. With 3 mic inputs; each with echo control, you can use this amplifier for announcements, speeches or even Karaoke night! This model also includes a chime button so you can create a chime sound before making announcements. The RCS series features Bluetooth audio streaming so you can play your favorite music or access a playlist right from your phone! This amp also features both USB and SD inputs allowing you to play audio stored on a USB thumb drive or SD Card. There are also 2-line inputs that allow you to plug in another audio device such as an MP3 player, CD player, TV, etc. This is our new and improved version that now has optical input so you can connect this to a digital source like a television or projector. Individual volume knobs for each of the 6 zones and volume knobs for each of the 3 mic inputs gives you full control over your system. The built-in clipping limiter function protects your speakers and the amp from overheating. For further protection there is also a cooling system in this amplifier that will keep the components running cool making the amplifier durable and reliable. This is our new and improved version with euro-block speaker terminals that make it super easy to install the wires even if the receiver is hidden in a corner. The terminals are detachable and once you connect your speaker wire to the terminal it just clicks into the receiver. Our goal with the RCS series was to make it possible for anyone to install 70 volt systems on their own without spending thousands of dollars on a contractor. This model makes it a breeze to connect many speakers and multiple external sources. We intentionally use common plugs like RCA and 1/4" on our model to make this more universal and user friendly. With our unique design you can feel confident in your DIY ability when installing our commercial system! What is 70 volt ?70 volt systems are the number one choice for any application where you want to install multiple speakers. With 70 volt there are a lot of advantages over 8-ohm systems. One of the main advantages is the simplicity of the wiring as well as how easy it is to match up speakers with the amplifier. For example, with this 350 watt / 70 volt amplifier, you can install speakers that total close to 300 watts. It does not matter if it is 20 speakers that are 15 watts each or 40 speakers that are tapped at 7.5 watts each. You always want your 70 volt amp to have at least 15 or 20% more power than the combined watts your speakers are tapped at. When we say the word tap, what we are referring to are the selectors that many speakers in 70 volt have on them. For example, some speakers might have selectable options of 1.5w, 3w, 5w, 10w. What this does is limit how many watts the built-in transformer on the speaker will allow the speaker to get from the amplifier. What this allows for is full customization of your sound for your space. In a restaurant for example you can tap your dining room speakers at 5 watts, the speakers by the bar area at 10 watts, the ones in the hallway at 3 watts and the speakers in the bathrooms at 1.5 watts. Another great feature with 70 volt is you can mix and match any 70 volt speakers whether they are ceiling speakers, wall mounted speakers, subwoofers, etc.70 volt systems allow you to run very long lines of speaker wire without signal loss. This makes it ideal when running long speaker leads.The wiring is simple. You just wire all the positive terminals of the speakers to the positive 70 volt terminals of the amplifier. The negative terminals on the speaker simply get wired to the negative terminals on the amp. You do not have to worry about impedance. The power is constant.If you want an easy to use feature-rich 70 volt amplifier with a ton of power and 6 zones the Rockville RCS350-6 is your best choice! Applications:RestaurantBarCaféSchoolLoungeHome (Multi-zone, Multi-room)OfficeWarehouse Features:Rockville RCS350-6 350 Watt commercial/restaurant amplifier 19" rack mountable (removable rack brackets) digital hybrid amplifier/receiverCapable of 70 volt, 100 volt, 8 ohm, and 4 ohm70/100 volt RMS Power: 355 Watts6-Zones – each zone has a separate volume controlBuilt in Bluetooth audio streamingFM radio tunerUSB input to play audio stored on a thumb drive (32gb max)SD card slot to play music stored on an SD Card (32gb max)Separate volume control for MIC1, MIC2, MIC3, MP3, LINE1, LINE 2, and MP3Echo control for the mic inputs with speed and repeat adjustmentsBuilt in clipping limiter to protect the amp and speakersBASS and Treble controlDetachable euro-block speaker output terminals for easy installationChime button for making announcementsTop quality aluminum panel with industrial grade knobs5 segments signal level indicationBuilt in cooling system keeps component cool at all times Inputs and Outputs:(2) Sets RCA AUX inputs(3) Mic inputsRCA Line outputOptical inputDetachable euro-block speaker output terminals for easy installation100V speaker red positive speaker output terminal70V speaker red positive speaker output terminal8 Ohm red positive speaker output terminalShared negative speaker output terminal Specifications:Power Requirements: 120V / 50-60HzA Weighted Signal to Noise (@ 1W) -68.1dBAA Weighted Signal to Noise (referenced to full 4 ohm power) -89.2dBAFrequency response: 49Hz to 14.9 KhzFrequency Response VS THD+M (worst case across normal bandwidth 1W @ 8 Ohms: 0.89%Weight: 22.7lbsDimensions: 19” x 16” x 4” inches How to Set Up your WET-D4: Video of WET-D4 Product: What's in the Box: 1 Speaker 1 Wall Mounting bracket 20 Foot banana to speaker wire cable Screws, washers, and anchors to mount the bracket Owners manual and warranty card Description of WET-D4 BLACK: The WET-D4 is a dual 4” speaker that is perfect for restaurants, patios, conference rooms, and much more. The dual speaker design disperses the sound wider so you can evenly spread the sound in any room. The WET-D4 has a built in 70V transformer that can be tapped as low as 5 watts and as high as 30 watts! This wide range of wattage taps makes this perfect for main bar speakers, hallway speakers, seating areas, patios, and everything in between. Our installation bracket is great because it has multiple angles for mounting the speaker. Once installed at your preferred angle the speaker is sturdy and will not move. The sound these speakers produce are both rich and full. They include large 9.75 oz magnets and the tweeter is an audiophile grade silk soft dome tweeter. We also have a built in 2nd order 2500Hz fixed crossover that protects the speaker and creates a great sound curve for any room. The 5-way binding post terminals give you many options such as regular speaker wire, spade terminals, and banana plugs. There is a tap switch on the speaker so you can easily select how many watts you want the speaker to get from the amplifier. Features: Rockville WET-D4 Dual 4" Indoor/Outdoor Commercial/Restaurant 70V or 8 Ohm Speaker in black Dual 4" Woofers with Polypropylene cones angled for perfect sound dispersion 1” Kapton Voice Coil 9.75 oz. Ferrite Magnet 1” silk dome tweeter is very efficient and has great sound Includes Wall Mounting Hardware IP55 rating makes this perfect for outdoor use or indoor use IP55 means this can withstand jet streams spraying it from any angle without any damage Rugged waterproof ABS cabinet Built in 12dB/Octave crossover with dynamic speaker protector Crossover details: 2nd order / 2500Hz rolloff 8 Ohm impedance when tap switch is in off position Waterproof metal grille Front facing port for increased bass response Wall bracket with multiple fixed mounting angles Frequency Response: 70Hz – 20Khz Sensitivity: 89dB Works for 70V, 100V, and 8 Ohm applications 5-way binding post terminals Built in tap switch behind the grille to select your 70V or 100V power Color: Black (Also available in white) Weight: 5.51 Lbs each Cabinet dimensions: 9.84” x 6.92” x 5.62” 70V Power Options: 30w 15w 10w 5w 100V Power Options: 30w 20w 10w 8 Ohm power handling: 50w RMS What is 70 volt ? 70 volt systems are the number one choice for applications where you want to install many speakers. With 70 volt there are a lot of advantages over 8-ohm systems. One of the main advantages is the simplicity of the wiring as well as how easy it is to match up speakers with the amplifier. For example, you can buy one 70V amplifier with 350 watts and you can install speakers that total close to 300 watts. It does not matter if it is 15 speakers that are 20 watts each or 50 speakers that are tapped at 5 watts each. You always want your 70 volt amp to have at least 15 or 20% more power than the combined watts your speakers are tapped at. When we say the word tap, what we are referring to are the knob on the rear of the speaker. For example, these speakers have selectable options of 5w, 10w, 15w, 30w. What this does is limit how many watts the built-in transformer on the speaker will allow the speaker to get from the amplifier. This gives you full customization over the sound for your space. In a restaurant for example you can tap your dining room speakers at 10 watts, the speakers by the bar area at 30 watts, and the ones in the hallway at 5 watts. Another great feature with 70 volt is you can mix and match any 70 volt speakers whether they are ceiling speakers, wall mounted speakers, subwoofers, etc. 70 volt systems allow you to run very long lines of speaker wire without signal loss. This is ideal when running long speaker leads. The wiring is simple. You just wire all the positive terminals of the speakers to the positive 70 volt terminals of the amplifier. The negative terminals on the speaker simply get wired to the negative terminals on the amp. You do not have to worry about impedance. The power is constant. Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 1 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: RCS350-6+(10) WET-D4 BLACK Home / About Us / Contact Us / Returns / FAQ's Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

Price: 979.45 USD

Location: Inwood, New York

End Time: 2024-02-12T22:39:05.000Z

Shipping Cost: 0 USD