ROCKBOARD Model 4 - 2.4 GHZ Guitar Wireless Receiver + Trs Patchbay

Description: RockBoard MOD 4 - 2.4 GHz Guitar Wireless Receiver + TRS Patchbay The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for pedalboards offers an easy-to-implement, wireless connection between your instrument and your pedalboard. It uses digital wireless technology that guarantees impressive sound quality, simple setup and reliable use for active musicians. The wireless system works in the 2.4 GHz ISM band and can therefore be used worldwide without restrictions. With a usable frequency range of 20 Hz - 20 kHz and only 5 ms latency, nothing is left to be desired. The patchbay section was developed to lead connections and connections of the pedalboard from the bottom to the outside, to provide you with a central access point to your setup and to be able to tidy up and sort your cable routes. The A, B, C and D TRS sockets are wired as direct, continuous connections from the front of the MOD 4 to the corresponding sockets on the rear. This allows you to set up your effects chain so that when you prepare for the gig, all you have to do is plug in cables into the front of the board instead of fiddling under the board.- Wireless system receiver + patchbay for pedalboards- Compatible with the XVive U2 Guitar Wireless System- 2.4 GHz ISM band for worldwide use- 30 m average range (without obstacles)- 24 bit / 48 kHz uncompressed digital signal transmission- 20 Hz - 20 kHz frequency range- 5 ms latency-> 103 dB dynamic range- - 85 dBm RF sensitivity- 0.2% distortion (THD)- 4 selectable channels- suitable for MOD slots in RockBoard pedalboards- Compatible with a wide range of other pedalboards- Acts as a central access point to your effects setup- Removable front panel for mounting on or under pedal boards- 4x 6.3 mm stereo jack thru (TRS)- 1x 6.3 mm mono jack receiver audio output (TS)- 1x DC 2.1 x 5.5 mm barrel connector thru- 1x AC IEC Thru- 1x USB Type A charge output- Power supply via optional 9V DC power supply, 2.1 x 5.5 mm barrel connector, polarity (-) inside- Battery operation not supported- Current consumption 500 mA- passive operation possible (only patchbay, without wireless system)- Dimensions with front panel (W x D x H): 175 x 85 x 47 mm- Dimensions without front panel (W x D x H): 160 x 85 x 33 mm- weight 500 g- Two antennas, a USB cable, mounting screws and nuts included in the scope of deliverySeen cheaper elsewhere? No problem - send us your price proposal!+++ 3 year guarantee +++All our articles have a 30-day right of return without additional Reason. Sheet music, reading material and software cannot be exchanged. The terms and conditions of Zoundhouse GmbH & Co.KG apply.The European Union provides an online platform (OS platform) for out-of-court settlement of consumer disputeshttps://ec.europa.eu/consumers/odrWhen purchasing multiple items from us: Put the item in the shopping cart and select Request total amount from buyer in the top right corner.If you intend to buy multiple articles: Put them into your shopping cart and choose combined shipping (up right) on your checkout. BREXIT information for UK customers: DHL will take care of all the official paperwork and payment of the VAT on your behalf and they will pass that cost to you on their invoice. From our limited experience so far, the government charges consist of 20% VAT plus a small amount for the paperwork involved (usually around 2.5%).The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for pedalboards offers an easy-to-implement, wireless connection between your instrument and your pedalboard. It uses digital wireless technology that guarantees impressive sound quality, simple setup and reliable use for active musicians. The wireless system works in the 2.4 GHz ISM band and can therefore be used worldwide without restrictions. With a usable frequency range of 20 Hz - 20 kHz and only 5 ms latency, nothing is left to be desired. The patchbay section was developed to lead connections and connections of the pedalboard from the bottom to the outside, to provide you with a central access point to your setup and to be able to tidy up and sort your cable routes. The A, B, C and D TRS sockets are wired as directBREXIT information for UK customers: DHL will take care of all the official paperwork and payment of the VAT on your behalf and they will pass that cost to you on their invoice.From our limited experience so far, the government charges consist of 20% VAT plus a small amount for the paperwork involved (usually around 2.5%).

Price: 185.87 USD

Location: Dresden

End Time: 2024-08-23T20:38:39.000Z

Shipping Cost: 53.38 USD