RHINO ARC II CAMERA GEAR ULTIMATE SLIDER BUNDLE w/TRAVEL CASE

Description: The Ultimate Slider Bundle from Rhino Camera Gear includes the 42" stainless steel Slider Pro, ARC II 4-axis motorized head, Rhino Focus for ARC II, and high-speed and high-torque motors. It also includes interchangeable 24" carbon fiber rails for better mobility where applicable, and a hard carry case with designated compartments for the entire bundle. The ARC II is a highly advanced motorized pan and tilt device. With the slider, slider motors, ARC II, and Rhino Focus, you get a sophisticated 4-axis setup that lets you keyframe motion and rack focus. The high-speed slider motor is designed for horizontal slides, while the high-torque motor is for incline and vertical shots.Rhino Camera Gear Slider Pro (42")The 42" Pro Slider from Rhino Camera Gear is an ultra-rigid, modular camera slider that supports loads up to 30 lb. This stainless steel slider is even more rigid than the previous version and uses an oversized knob to mount quickly and easily on your tripod, no slider spinning required. Use the Pro Slider with separately available components like the Flywheel for smooth manual slides, the High-Torque Motor for vertical motion, or the Arc II motion control unit. Optional carbon fiber rails are available to support various rig configurations.The Rhino Pro Slider features all-terrain legs for leveling on almost any surface and a 3/8"-16 carriage screw for mounting your camera or ball head. This 42" slider incorporates a center and two end Tripod Quick Mounts. Vertical travel is enhanced by a newly designed end plate with a press-fit pulley mount that eliminates slippage.Key Features42" stainless steel railsEasy-to-use center and two end Tripod Quick MountsIncreased rigidity from previous versionInterchangeable with separately available railsSupports loads up to 30 lbNew end-plate design for smooth vertical movesUse with optional Flywheel, High-Torque Motor, and/or Arc II motion controllerCamera carriage with 3/8"-16 screwIntegrated carriage brake3/8"-16 and 1/4"-20 mounting threadsFolding all-terrain legsUPC: 796914745310Rhino Camera Gear Arc II 4-Axis Motorized Pan/Tilt HeadPerform smooth, precise, quiet camera moves automatically with this Arc II 4-Axis Motorized Pan/Tilt Head from Rhino Camera Gear. The base Arc II can perform pan and tilt operations, and optional slider and focus options are available separately, making it capable of full 4D operations. It mounts a camera with/or fluid head using its Manfrotto 501-type quick release plate and 1/4"-20 and 3/8"-16 screw options. The head can support a cinema camera rig up to 15 lb in weight, and its motors are ultraquiet.Powerful Arc II features include time-lapse, light-lapse mode that performs night-to-day time-lapse, facial tracking, keyframe presets, and camera power options. The head integrates seamlessly with Rhino sliders so setup with another axis is a breeze. You can control the modes and movement of the Arc II using the integrated joysticks, or you can utilize wireless iOS control with an Arc II control app.To power the Arc II, it features internal 4400mAh lithium-ion batteries that are charged using the included international charger kit. It also features a power-saving mode and automatically shuts down when it's not in use for 15 minutes. It can operate via an optional slider at up to a 90° angle with up to 5 to 15 lb rig weight and a separately available high-torque motor.Key FeaturesUp to 4-axis head with pan and tilt built-in; slide and focus are optional15 lb load capacityUltraquiet motor operationReal-time control of Arc II using iOS via wireless or by using the onboard joysticksPresets using keyframes for creating repeatable shotsCan be used vertically with an optional high-torque motorManfrotto 501-type quick release camera plate with 1/4"-20 and 3/8"-16 mounting screwsOne 3/8"-16 mounting thread on the bottomPowers using built-in lithium-ion batteries and charges with included 2.1mm barrel adapter and international charging kitPowers down after 15 minutes of idle time to save battery lifeAutomatic face tracking technologyTime-lapse with night-to-day light-lapse featurePower your camera using Arc II power with an optional cableEasy to set up and fully compatible with Rhino Gear tripods and sliderUPC: 796914745327Rhino Camera Gear Focus for Arc IIThe Focus for Arc II from Rhino Camera Gear enables you to add precision focus moves to your Arc II motion control shots. Suitable for both slider and tripod use, the Rhino Focus works by shifting focus automatically between your two chosen keyframes.This focus system features a cine-standard 0.8 MOD gear and mounts via its 15mm carbon fiber rod. It also includes an adjustable rubber lens gear and a power cable.Rhino Camera Gear High Speed Slider MotorOutfit your camera slider for high-speed shots with this High Speed Slider Motor from Rhino. This high-speed motor can attach to any Rhino slider and can connect to the Arc II for camera automation. The low-profile motor can move a 5 lb load at a 20° angle and can move at 5" per second. Both 24 and 42" motor cables are included with the motor.Rhino Camera Gear High Torque Slider MotorOutfit your camera slider for vertical-torque shots with this High Torque Slider Motor from Rhino. This high-torque motor can attach to any Rhino slider and can connect to the Arc II for camera automation. The low-profile motor can move a 10 lb load at a 90° angle and can move at 1" per second. Both 24 and 42" motor cables are included with the motor.Rhino Camera Gear Interchangeable Carbon Slider Rails (24")This pair of Interchangeable Carbon Slider Rails from Rhino Camera Gear enables you to easily change the length and load capacity of your Rhino slider. The 24" lightweight rails are constructed of precision-ground carbon fiber and are ultra-rigid, supporting up to 15 lb. A center Tripod Quick Mount enable you to quickly mount the rails.Features24" lightweight carbon fiber railsEasy-to-use Tripod Quick Mount in the center Supports loads up to 15 lbRhino Camera Gear Hard-Shell Slider Carrying CaseThe dedicated Hard-Shell Slider Carrying Case is designed to safely transport your Rhino Camera Gear slider and its accessories. Constructed of aluminum and a composite, this locking case features a recessed top handle and wheels. It is lined with high-density EVA foam and has four accessory pockets in its lid.This hard-shell case will fit your 24 or 42" Rhino slider, interchangeable rails, Rhino Arc II pan/tilt head, Rhino Focus unit, both High Speed and High Torque Motors, and Ultra-Fast Charger.FitsRhino slider (24 or 42")Interchangeable rails (24 or 42")Rhino Arc IIRhino FocusRhino motor (both high speed and high torque)Ultra-fast charger

Price: 2069.99 USD

Location: Egg Harbor Township, New Jersey

End Time: 2024-10-13T22:16:21.000Z

Shipping Cost: N/A USD