RETROFIT FOR KODAK & OGP OPTICAL COMPARATORS USING HB0-200W MERCURY ARC LAMPS.

Description: NOTE: PayPal is our preferred payment method. If you or your company do not have a PayPal account PayPal guides you through the payment process using your credit card. DO NOT BUY, UNTIL YOU COMMUNICATE WITH US AS WE BUILD MANY MODELS. WE WANT TO MAKE SURE YOU BUY THE CORRECT ONE FOR YOUR COMPARATOR. DELIVERY MAY BE DELAYED UP TO FIVE DAYS. This THLC-24-350-3R-OGP is our newest retrofit designed for some Kodak and Optical Gaging Products (OGP) Optical Comparators currently using an Osram or other manufacturer's HBO-200-W mercury arc lamp. Among the OGP and Kodak comparator models this can be used on are XL-14, XL-30, XL-815, OQ-30. Our retrofit uses an EHJ/5 lamp, 24Volt-250 Watt, 500 Hr Life, 9000 Lumens. HBO lamps darken with use and the EHJ/5 does not. A special maintained action foot switch comes with this retrofit to turn the lamp on while inspecting your part and turn it off when you walk away. DO NOT TOUCH LAMP WITH FINGERS AS THE SALT FROM THEM WILL BURN INTO THE QUARTZ ENVELOPE. WASH LAMP WITH ALCOHOL IF TOUCHED. INSTALATION INSTRUCTIONS (A) DISCONNECT POWER TO THE COMPARATOR (B) FIND A SUITABLE LOCATION TO PLACE THE NEMA-3R ENCLOSURE (C) CHOOSE BETWEEN USING THE ORANGE CORD TO SUPPLY 120 VAC TO THE NEMA BOX BY PLUGGED INTO A WALL SOCKET OR (CC) THE BLACK 14/3 CORD USING FORK TERMINALS TO CONNECT BLACK WIRE TO 120 VAC, WHITE WIRE TO COMMON & GREEN WIRE TO GROUND TERMINALS. (D) THE SPECIAL FOOT SWITCH INTERCEPTS THE AC FROM EITHER OF THE ABOVE TO THE POWER SUPPLY. IT PLUGS INTO THE POWER SUPPLY (BACKWARDS) AND THE POWER CORD PLUGS INTO IT. (E) REMOVE THE ASBESTOS PLATE HOLDING THE HBO LAMP TERMINALS. REMOVE THE WIRES FROM IT TO THE POWER SUPPLY. (F) ATTACH THE OGP 42-2047 BRACKET WHERE THE ASBESTOS PLATE HAD BEEN (G) ROUTE THE 14/3 WIRE FROM THE NEMA BOX UP THROUGH THE LAMP HOUSE COLUMN TO THE BRYANT LAMP SOCKET. (H) CONNECT THE BLACK WIRE (24 VAC) TO THE BRYANT SOCKET'S GOLD SCREW (CENTER CONTACT). (I) CONNECT THE WHITE WIRE (COMMON) TO THE BRYANT SOCKET'S SILVER SCREW (OUTER SHELL). (J) INSTALL THE INSULATOR TO THE BRYANT SOCKET BASE TURNING IT TO LOCK USING A FLAT SCREWDRIVER. (K) SECURE THE BRYANT SOCKET WITH TWO 6-32 SHCS'S TO THE 42-2047 BRACKET WITH THE LARGER HALF MOON SLOT AWAY FROM THE OPERATOR. (L) INSERT ISCA'S LAMP SOCKET ASSEMBLY INTO THE BRYANT LAMP HOLDER. (M) INSERT AN EHJ/5 BULB INTO LAMP SOCKET ASSEMBLY. DO NOT TOUCH THE BULB GLASS. WIPE WITH ALCOHOL IF YOU DO. (N) KEEP ORIGINAL SWITCH IN ON POSITION TO MAKE SURE THE LAMP HOUSE FAN IS ALWAYS RUNNING WHEN THE LAMP IS ON. (O) ADJUST BULB FILAMENT AS YOU DID THE OSRAM MERCURY ARC LAMP. Each Retrofit comes with a five year Warranty and FREE BULBS FOR LIFE. We can send using your shipper account if you tell us before you make payment.Our retrofits are being used in North America (Most of the US States, Mexico and Canada), Asia, Europe, South America and South Africa.In addition to eBay sales and to our calibration customers we also sell retrofits through the following:9 Calibration houses & 2 lamp distributors in 10 states (CA, CT, GA, IN, MI, NJ, NY, OH, OK, SC). Bruckner Supply, Hagemeyer USA. QVI, Quality Vision International,Tektronix. Two Pictures are of the bulb's filament projected above the entrance way with our lamp house 30' away in our kitchen. Please use the "Ask A Question" at the bottom left of this eBay listing and we will answer them for you.

Price: 995 USD

Location: Lancaster, Pennsylvania

End Time: 2024-10-29T16:10:39.000Z

Shipping Cost: N/A USD