Radio Design Labs RDL D-ECR1 Audio Power On / Off Remote Wall Plate

Description: RDL Radio Design Labs D-ECR1 Audio Power On / Off Remote Wall Plate Please note, I found the second "Stock" picture online and it's Face Plate is shown in White, The one in this listing is also "White" in color MSRP is $99 - Best Price I could find was $70 I have No Way to test it so it is being Sold AS IS for Parts The Second Picture is a "STOCK" Photo to reference how the backside is configured This is part of a group of RDL Components that I will be listing Appears to be New / Old Stock ? Still in the original Factory Shrink Wrap w Instructions - Please Note the paper work is sealed inside of the Factory Shrink Wrap - It Does Not come with the original box Generic Specs found on line : Remote System Power On/Off Control PanelPushbutton Toggles Power On and Off/StandbyLED Power Indicator Color Indicates ModeBlue LED: Active System PowerYellow LED: Standby (System Power Off)Red LED: Power Off and Auto Power-Up DisabledFlashing Red LED: Emergency OverrideDirect Control of Modules with RJ45 Power ControlConnection to Controller Using Twisted-Pair Wiring The D-ECR1 and DS-ECR1 are wall-mounted remote controls providing A/V system power-up and power-down. These controls directly interface with RDL products equipped with green coded RJ45 control jacks, such as the FP-ECC1 Energy Conservation Controller. The D/DS-ECR1 provides a momentary pushbutton for power control and an LED power status indicator. The indicator glows yellow when the associated system power is in the standby mode. Pressing the soft power button toggles the system power on. The indicator glows blue when system power is on. Pressing the button when the power is on returns the system power to standby. If the host controller is set to allow full power-down, holding the button for 3 seconds takes the system out of standby and turns it off. The system remains off until the button is again pushed, placing the system in standby. The D-ECR1 features a standard RDL white front panel. The DS-ECR1 is offered in stainless steel with custom lettering available. These finishes match other RDL remote selectors and jack plates for a visually appealing installation of multiple controls. Features: Remote System Power On/Off Control Panel Pushbutton Toggles Power On and Off/Standby LED Power Indicator Color Indicates Mode Blue LED: Active System Power Yellow LED: Standby (System Power Off) Red LED: Power Off and Auto Power-Up Disabled Flashing Red LED: Emergency Override Direct Control of Modules with RJ45 Power Control Connection to Controller Using Twisted-Pair Wiring Available in Standard RDL White (D-ECR1) It will be Thoughtfully packed up and quickly shipped Over 22 years with eBay and over 4,500 Items sold with 100% Positive Feedback - You will Likely be pleased Ships via : USPS, UPS or Fed Ex Ground for $8.50

Price: 20.5 USD

Location: Prescott, Arizona

End Time: 2024-01-02T22:09:51.000Z

Shipping Cost: 8.5 USD