Description: Prime-Line GD 12230 Left Hand Wind Torsion Replace Broken Garage Door Springs-0.243 inch x 2 inch x 32 inch, Yellow, 32 in, WhiteProduct Description Use this Prime-Line Steel Right Hand Wound Torsion Spring to replace broken garage door springs. In the case of dual spring installations, note that the proper use of LEFT WIND and RIGHT WIND springs is imperative. Also, when dual spring installations are involved, it is important to replace both springs, as replacing only one spring may add increased strain to the older non-replaced spring. As an important safety precaution: all broken or malfunctioning hardware should be replaced with matching hardware, without any modifications. If attempting to replace the torsion springs yourself, it is important that the removal or adjustment of torsion springs is not attempted with any other tool other than Prime-Line’s item number GD-52238. Failure to utilize Prime-Line’s item number GD-52238 for the replacement of these springs may result in severe personal injury. Note: To determine the handing of your torsion spring wind, look at the end of the spring with the ‘finger’ of the spring at the top of the wind. When the end of the spring is at 12:00 o'clock and it is pointing to the left, the spring is a right wind; if the end of the spring points to right (positioned at 12:00 o'clock) it is a left wind. From the Manufacturer This torsion spring requires the use of two winding rods. It comes in a white finish with a .250 wire size and a 1-3/4 in. inside diameter. It features a right handed wind with and 32 in. length. REPLACE BROKEN SPRINGS – Use this Prime-Line Steel Right Hand Wound Torsion Spring to replace broken garage door springs. It includes stationary and winding cones. REQUIRES – The use of 2 winding rods for replacement. When dual spring installations are involved, it is important to correctly install both the left and right wind springs during the same job. SELECTION – Torsion springs provide lifting force for heavy garage doors and must be selected by the spring’s dimensions, rather than the door’s weight. Use the spring selection guide to assure the proper replacement part has been selected. DIMENSIONS – Garage door torsion spring is: 0.243 inch wire size x 2 inch inside dimension x 32 inch length with yellow color code. MOUNTING – Right-hand springs are mounted to left side of center and left hand springs are mounted to the right side of center (inside the garage looking out). W4
Price: 64.99 USD
Location: Gilbert, Arizona
End Time: 2024-12-14T22:55:19.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Color: White
Size: 32 in.
MPN: Does not apply
Model: Does not apply
Brand: PRIME-LINE
