Description: PowMr 10000W 48V 120V240V Split Phase Solar Hybrid Inverter 200AMPPT Parallel 6X POW-SunSmart 10KP is a new model of solar energy storage inverter control inverter integrating solar energy storage & utility charging and energy storage, AC sine wave output. It adopts DSP control and features high response speed, reliability, and industrial standard through an advanced control algorithm. It applies to smallcomercial scenarios. Instructions 【10KW Solar Inverter】This is a solar inverter with both single-phase and split-phase functions. Is a new type of solar energy storage inverter control inverter integrating solar energy storage & utility charging and energy storage, AC sine wave output. It adopts DSP control and features high response speed,reliability, and industrial standard through an advanced control algorithm. 【 Support Up to 6 Units in Parallel Connection】 The 10KW solar inverter charger allows connection of up to 6 units simultaneously. This configuration grants a total power output of up to 60000W, catering to various applications such as residential, office, commercial, and industrial use. With its dependable and efficient design, as well as its effortless expandability, this solar inverter charger is an ideal choice for extensive solar systems. 【14 Smart Protection Functions】: Multiple intelligent protections, such as PV input current/power limiting protection, PV input over-voltage, PV night reverse current protection, AC input over-voltage protection, AC input under-voltage protection, etc. 【Technical Specifications】: Max.PV array power:11000W, Max.MPPT Charging Current:200A, Rated Output Power:10000W, Max.Peak Power:20,000W, Rated Output Voltage:120/240Vac(split phase/single phase) , Max.Voltage of Open Circuit:500Vdc.Embedded Interfaces:RS485 / CAN / USB / Dry contact. 【Dual MPPT/Battery Type】: Dual MPPT with 99.9% efficiency and maximum 22A current in a single circuit, perfectly adapted to high power modules.Compatible with various batteries such as AGM, Gel, Lead-acid, Lithium-ion and LiFePO4 batteries, and supports battery-free. With a dual activation function when the li-ion battery is dormant; either mains/photovoltaic power supply access can trigger the activation of the li-ion battery. 【Single/Split-phase mode】: In split-phase mode: Output Voltage Range (L-N): 100~120Vac, 120Vac default, Output Voltage Range (L-L): 200~240Vac, 240Vac default. In single phase mode: Output Voltage Range (L-N): 100~120Vac, 120Vac default. 【Time-slot charging/Discharging function】:The POW-SunSmart series is equipped with a time-slot charging and discharging function, which allows users to set different charging and discharging periods according to the local peak and valley tariffs, so that the utility power and PV energy can be used rationally. 【Charging/AC output mode】: 4 AC output modes: Utility Priority Output, Solar and Utility Hybrid Output, Solar Priority Output, Inverter Priority Output. 4 battery charging modes: Hybrid Charging, Utility Priority Charging, Solar Priority Charging, Only Solar Charging. Advantages ⚫ Supports lead acid battery and li-ion battery connections. ⚫ With a dual activation function when the li-ion battery is dormant; either mains/photovoltaic power supply access can trigger the activation of the Li-ion battery. ⚫ Support split-phase and single-phase pure sine wave output. ⚫ Supports four different voltage levels of 100Vac, 105Vac, 110Vac, and 120Vac per phase. ⚫ Supports two solar inputs and simultaneous tracking of two solar maximum power charging/carrying capacity functions. ⚫ Dual MPPT with 99.9% efficiency and maximum 22A current in a single circuit, perfectly adapted to high-power modules. ⚫ 4 charging modes are available: solar only, mains priority, solar priority, and mixed mains/PV charging. ⚫ With the time-slot charging and discharging setting function, you can set the time period for cutting in/out of mains charging and switch the time period between battery discharging and mains bypass power supply mode. ⚫ Energy saving mode function to reduce no-load energy losses. ⚫ With two output modes of utility bypass and inverter output, with uninterrupted power supply function. ⚫ LCD large screen dynamic flow diagram design, easy to understand the system data and operation status. ⚫ 360° protection with complete short circuit protection, over-current protection, over under voltage protection, overload protection, backfill protection, etc. ⚫ Support CAN, USB, and RS485 communication. Specification: MODEL POW-SunSmart10KP CAN BE SET INVERTER OUTPUT RatedOutput Power 10,000W Max.Peak Power 20,000W Rated Output Voltage 120/240Vac(splt phase/singlephase Y Rated AC Frequengy 50/60Hz Y Waveform PureSineWave Switch Time 10ms(typical) Parallel Number 6 Overload Protection After triggering the overload protection theinverter wilresume output after3 minutes,5 consecutive overloadswillswitch off theoutput untilthe inverter isrestarted(102%sload<110%)±10%:error and output shutdownafter 5min,(110%
Price: 1569.99 USD
Location: Rancho Cucamonga, California
End Time: 2024-10-12T07:04:21.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: PowMr
Type: Solar Inverter
System Configuration: Off-Grid
Current Type: AC
Charging Mode: MPPT (Maximum Power Point Tracking)
Application: PV system
Features: Support WIFI remote monitoring
Resistance Properties: Not apply
Power: 10000W
Model: POW-SunSmart 10KP
Power Source: Solar
Inverter Technology: Battery-Based
Wattage: 10000-14999 W
Product Line: POW Series
Country/Region of Manufacture: China
Connector Configuration: Support WIFI remote monitoring
Color: Orange
Recommended Environment: Indoor
Protection Properties: Low Voltage Protection
Maximum Input Voltage: 240V
Maximum Flow Rate: not apply
Maximum Input Power: 11000W
Material: as shows
Voltage: 110V/220V
Current Output: 200A
Max. Peak Power: 20,000W
Parallel Number: 6
Rated Output Voltage: 120/240Vac (split phase/single phase)
Rated Battery Voltage: 48Vdc
Battery Type: Li-ion / Lead-Acid / User Defined
Max. MPPT Charging Current: 200A
Max. Mains/Generator Charging Current: 120A
Max. Hybrid Charging Curren: 200A
Num. of MPP Trackers: 2
Max. Voltage of Open Circuit: 500Vdc/500Vdc
MPPT Voltage Range: 125-425Vdc
Size: 620*445*130mm(2*1.5*0.4ft)
Weight: 27KG
Available Variations
Color: 10KW
Price: 1569.99 USD
Available Quantity: 5
Quantity Sold: 0
Color: 20KW
Price: 3195.78 USD
Available Quantity: 2
Quantity Sold: 0
Color: 30KW
Price: 4671.57 USD
Available Quantity: 2
Quantity Sold: 0
Color: 40KW
Price: 6115.96 USD
Available Quantity: 2
Quantity Sold: 0
Color: 50KW
Price: 7528.95 USD
Available Quantity: 2
Quantity Sold: 0
Color: 60KW
Price: 8910.54 USD
Available Quantity: 2
Quantity Sold: 0