PostHugger™ 6x6 to 4x4 Post Adapter Brackets & Outside Corners! 1/8" Thick Steel

Description: PostHugger™ Adapter Brackets to Go From 6x6 to 4x4 Posts and Beams! Build your own rugged and heavy duty Pergola, shop/garage/CNC table, or deck with our RiverDriveDesigns, USA made, 1/8" thick, steel brackets! Also great for fixing/reinforcing the one you already have! These are not flimsy/bendable metal. We make them using 1/8" thick steel - a single corner bracket weighs just over 2 pounds - - strong enough to take what you throw at it (or what you throw it at!), but not so heavy where they are hard to work with. We use 1/8″ steel which is thicker than a Quarter and a Dime stacked on top of each other. Also unlike others who just cut and ship steel right off their table, we take the time to hand debur and wire brush both the inside and outside of every piece. This listing is for individual brackets made to adapt/connect 6 x6 (5.5"x5.5:) Posts to 4 x 4 (3.5"x3.5") Posts. If you are looking for Outside Corners for dimensional 4x6 Posts, go here: https://www.ebay.com/itm/294873250360. Our brackets can be installed using any 1/2" wood lag screws or in instances where there will not be a collision of bolt holes, 1/2" thru bolts. If you use lag screws, we recommend 1/2" x at least 2" length for 4x4 posts and at least 2.5" length for 6x6 posts, with longer bolts adding more strength. If you choose to through-bolt in locations where possible, go at least 1/2" x 4.5" for 4x4 posts. BOLTS/LAG SCREWS ARE NOT INCLUDED WITH OUR BRACKETS; you can pick them up at your local Home Depot /Menard's/Lowe's/Ace Hardware store when you pick up your wood. Our Bracket Adapters Product Line for this purpose includes: 2Pc 6-To-4 Straight/Upright Adapter- This bracket is used where your upright post is a 6x6 and you are adding a vertical 4x4 post on top to extend your 6x6. So it acts to reduce a 6x6 post to accept a 4x4 post. It is made up of two separate halves. One half bolts to the 6x6 and the 4x4 and the other half has feet which bolt to the 6x6 and also bolts to the 4x4. Through bolting is not possible with this bracket; instead, all holes are offset and the steel surrounds the 4x4. 6-To-4 Bent L - This bracket is used where your upright post is a 6x6 and you have one incoming horizontal 4x4 post you want to attach. 6-To-4 Flat L - This bracket is used where your upright post is a 6x6 and you have one incoming horizontal 4x4 post you want to attach. 6-To-4 Flat T - This bracket is used where your upright post is a 6x6 and you have two incoming horizontal 4x4 posts you want to attach in a straight line. 6 To 4 Bent L - This bracket is bent at a 90 degree angle with one tab sized for a 4x4 post and the other for a 6x6 post. 6-To-4 Outside Corner - This outside corner bracket is used where your upright post is a 6x6 and you are adding horizontal incoming 4x4 posts on top to make a corner. Please note that unless you choose the powder coated option, these ship as raw, unpainted steel. You can either paint them the color of your choice, finish them with a clear coat, or allow to achieve a natural rust patina over time. ***Powder Coated Brackets: If ordering brackets in the black powder coat, please allow an additional 1-2 days for shipping & delivery.*** We are the original designer of the PostHugger™ brackets, which may be copied, but never equaled! :) If you find a PostHugger™ knockoff, give us a chance to meet or beat their price. WHY BUY POSTHUGGER™? • We are the original designer of these brackets, often copied by others but never equaled! • We use 1/8″ steel which is thicker than a Quarter and a Dime stacked on top of each other. • Unlike others who just cut and ship steel right off their table, we take the time to hand debur and wire brush both the inside and outside of every piece. • All powder coating is done in-house to ensure a quality application on each and every piece. • We use only 100% first-rate, high quality powders, which are all made in America. • We develop all designs ourselves and, unlike some, never poach the intellectual property of others. • We proudly stand behind all our products. • All our PostHugger™ Brackets & metal artwork products are Made in America with American-Made Steel!(c) 2023 Thermo-Flex Technologies, Inc. - All Designs, Photos, and Text are the Intellectual Property of Shop Owner and are not to be copied without express written permission.

Price: 22 USD

Location: Cartersville, Georgia

End Time: 2024-08-13T12:19:08.000Z

Shipping Cost: 0 USD