PETG _ ZWO Seestar S50 Smart Telescope DIY Solar Accessory

Description: This is the most versatile accessory 3D_Print with PETG material for users who want more durability, higher temperature resistance, and less brittle than PLA material. According to the filament manufacturer, the heated distortion temperature for PETG material can hold up to 70°C/158°F, while PLA can only up to 50°C/122°F. The Items for sale: Items are 3D Printed in JAREES PETG Orange or Black (Pick your color) QTY (1): DIY Top/bottom pieces Third-party Solar Filter Film mount (Orange PETG and no solar film included) If needed you can thread in an M3 screw to the small hole on the 3DPrint part, which will bulge on the other side of the wall for tighter fitment. Do it slowly with some force applied for the M3 screw to thread in. Over-tighten/force the screw will punch through the thin 3D print wall (~1mm thick). SeeStar S50Telescope, Phone, Tablet, Solar Len Filter, solar film/glass, other deep sky lens filter, EZ Finder II, and Stand not included. Item will ship in 1-2 business days. Disclaimer: ***NOTE*** Due to the 3D print nature of this product, your results may vary. Sorry, there are no returns or exchanges. I am NOT responsible for any damages to your EAA telescope due to the result of the use of this product ***NOTE***

Price: 7.15 USD

Location: Arlington, Texas

End Time: 2024-10-28T03:29:12.000Z

Shipping Cost: N/A USD