ParSkins Vinyl Golf Wrap for Driver Club Heads DIY Decal

Description: Driver Skins are Do It Yourself Vinyl Wraps for Any Golf DriverParSkins vinyl wraps are pre-cut to fit any golf club head and have a matte finish to eliminate glare. Made for both lefty’s and righty’s, each kit comes with knifeless tape for a clean install.Born from our love of outdoor activities, ParSkins offers sports enthusiasts an affordable option for golf club customization, while also adding a layer of protection. Our high quality 3M vinyl is made to last as long as your drives, yet easily removeable when you want to change things up. Choose from multiple patterns ranging from patriotic themes to exciting camouflage.Driver Skin Kit TemplateParSkins Driver Skins will fit any size driver. ParSkins vinyl wraps are pre-cut to fit any driver head and have a matte finish to eliminate glare. Made for both lefty’s and righty’s, each kit comes with knifeless tape for a clean install.ParSkins is proud to offer unique and top-tier designs that speak to a wide range of personalities and styles. When it comes to standing out from the crowd and showing off your swing, we've got you covered!The skin is over-sized to accommodate even the largest of driver heads, and with the use of the knifeless tape, can be safely trimmed.Frequently Asked QuestionsWhy won't the vinyl stick to my club?You must thoroughly clean the surface before installing the ParSkin to remove any dirt, grass, or fingerprints. Also ensure the surface of the club head is dry before application. Finally, make sure to use heat after install to activate the vinyl to adhere and conform to the club.Can the wrap be removed?ParSkins are removable and will have no effect on the underlying finish. To remove the ParSkin, heat the material with a heat gun or hair dryer and simply peel off. If there is any residue left behind, use rubbing alcohol or Goo Gone to remove.How should I use the knife-less tape?Make sure that the filament on the knife-less tape is completely separated from the backing before starting to pull through the vinyl. Make sure the vinyl adheres to the tape all the way around the driver. Hold it the vinyl down with your thumb at the edge of the vinyl to start a clean cut, then pull the tape quickly.How durable are ParSkins?ParSkins wraps are made from high-performance vinyl. The material is 6/10 mm in thickness and will add an extra layer of padding protection to the surface of your club, without affecting the club's performance. ParSkins are made for use and abuse, taking dings, and scratches so your club doesn't have to!Step by Step Installation InstructionsWHAT YOU NEEDAside from the golf club and skin, you will need the knifeless tape (included), scissors, and a heat gun (or hair dryer). CLEAN THE CLUB HEADUse an alcohol wipe or degreaser and a lint-free towel to remove all dirt, grass, and debris from the surface. CUT KNIFE-LESS TAPEMeasure approximately 16" of the knifeless tape. It is helpful if you separate the filament from the backing on one end for ease of access later in the process. APPLY THE KNIFE-LESS TAPEAttach along the natural edge on the exterior side of the club head. Leave enough slack on both ends for access later. POSITION THE SKINPeel the backing off the vinyl and position the skin on the surface. Use the notch to line up against the handle and front edge. Reposition as necessary until you are happy with placement. WORK THE VINYLUse your fingers and run them along the vinyl, pulling and stretching as necessary to work out the wrinkles. Start on one end and work your way across. Pull vinyl over knifeless tape on all edges. PEEL OFF KNIFE-LESS TAPEGrip the slack from the end of the knife-less tape and pull to trim the excess. Keep pressure on the backing and vinyl as you pull to ensure a clean cut. APPLY HEATApply heat (low setting) and run your fingers along the vinyl to work out any remaining wrinkles. Use pressure to set the vinyl in place, especially along the edges, to ensure longevity. READY FOR USEThe ParSkin is ready for use immediately. No cure time required. Enjoy the new look of your golf club and swing with style! A Few Tips to ConsiderMake sure that the filament on the knife-less tape is completely separated from the backing before starting to pull through the vinyl.Make sure the vinyl adheres to the tape all the way around the club head.Hold the vinyl down with your thumb at the edge of the vinyl to start a clean cut, then pull the tape quickly.

Price: 24.99 USD

Location: Buhler, Kansas

End Time: 2024-08-28T23:46:12.000Z

Shipping Cost: 0 USD