Paasche 1/4 HP Airbrush Compressor w/ TG-3AS Gravity Feed Airbrush Set & Paints

Description: Paasche 1/4 HP Airbrush Compressor w/ TG-3AS Gravity Feed Airbrush Set & Paints The Paasche TG is a double action gravity feed airbrush. The airbrush features a chrome plated body and anodized aluminum handle for durability. The TG is our finest detail airbrush allowing the user to achieve hair line detail and using our optional fan head wider patterns up to 3 inches. A PTFE packing allows the TG to handle any water or solvent based paint. Clean up is as simple as spraying your paint cleaner though the airbrush and wiping of the needle. The TG is best used for those requiring high end detail. Applications including automotive graphics, models, taxidermy, cake decorating, tattoos, finger nails, graphic arts, illustration, etc. The TG airbrush is made and assembled in the USA and includes the following. TG-3AS Includes: TG#2 double action airbrush, .4oz cup, cup cover, size 1 & 3 heads, fan aircap, hanger, (2) wrenches, 6ft braided hose, lessons booklet and manual. Features:Airbrush Made In The USA Quality Precision materials for fine detail work Highly polished & hardened stainless steel needles for long life and reduced clogging Solvent proof needle packing allow spraying of water & solvent based paints Chrome plated body Specs: Part Number: TG-3AS Type: Double Action, internal mix, gravity feed Head Size: Size 1(.25mm), size 2(.38mm), size 3(.66mm) Fluid Packing: PTFE - can spray solvent or water based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼-20 Paasche thread – adapters available Bottle size: N/A Spray Pattern: Hairline to 1-1/2 - with fan aircap up to 3 Finish: Chrome plated body The DC600R airbrush compressor With tank and case is perfect for any hobby or artist airbrush. The maximum operating pressure 1-50 PSI depending on airbrush being used. The DC600R is more powerful than the single head compressors and has a protective metal case. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8"BPS adaptor for competitor hoses. The compressor features include:Dual piston compressor Tank and protective case Regulator & moisture trap Two airbrush holders Delivers 1-50 PSI depending on airbrush being used Standard Paassche 1/4"NPT hose fitting 1/8" BPS hose adapter for competitor hoses Auto shutoff feature Carrying handle Quiet: noise level is 50 Db's Includes 1 year warranty from date of purchase Also Included is a five pack of Paasche Extreme Air water based acrylic paint. (White, Black, Red Blue & Yellow) Payment We accept payment by any of the following methods: PayPal & Major Credit Cards Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping Your order will be dispatched within 1-2 working day of receiving payment (Monday-Friday) and you should expect to receive it one or five days after dispatch. Tracking number will be on the invoice which will be e-mailed. Returns If you are not 100% satisfied with your purchase, you can return the product and get a refund. You can return a product for up to 30 days from the date you purchased. Any product you return must be in the same condition you received it and in the original packaging. Customer pays return shipping.The Paasche TG is a double action gravity feed airbrush. The airbrush features a chrome plated body and anodized aluminum handle for durability. The TG is our finest detail airbrush allowing the user to achieve hair line detail and using our optional fan head wider patterns up to 3 inches. A PTFE packing allows the TG to handle any water or solvent based paint. Clean up is as simple as spraying your paint cleaner though the airbrush and wiping of the needle. The TG is best used for those requiring high end detail. Applications including automotive graphics, models, taxidermy, cake decorating, tattoos, finger nails, graphic arts, illustration, etc. The TG airbrush is made and assembled in the USA and includes the following. TG-3F Includes: TG#2 double action airbrush, .4oz cup, cup cover, size 1 & 3 heads, fan aircap, hanger, (2) wrenches, 6ft braided hose, lessons booklet and manual. Features: ---Airbrush Made In The USA ---Quality Precision materials for fine detail work ---Highly polished & hardened stainless steel needles for long life and reduced clogging ---Solvent proof needle packing allow spraying of water & solvent based paints ---Chrome plated body Specs: Part Number: TG-3F Type: Double Action, internal mix, gravity feed Head Size: Size 1(.25mm), size 2(.38mm), size 3(.66mm) Fluid Packing: PTFE - can spray solvent or water based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼-20 Paasche thread – adapters available Bottle size: N/A Spray Pattern: Hairline to 1-1/2 - with fan aircap up to 3 Finish: Chrome plated body The DC600R airbrush compressor With tank and case is perfect for any hobby or artist airbrush. The maximum operating pressure 1-50 PSI depending on airbrush being used. The DC600R is more powerful than the single head compressors and has a protective metal case. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8"BPS adaptor for competitor hoses. The compressor features include: ---Dual piston compressor ---Tank and protective case ---Regulator & moisture trap ---Two airbrush holders ---Delivers 1-50 PSI depending on airbrush being used ---Standard Paassche 1/4"NPT hose fitting ---1/8" BPS hose adapter for competitor hoses ---Auto shutoff feature ---Carrying handle ---Quiet: noise level is 50 Db's ---Includes 1 year warranty from date of purchase Also Included is a five pack of Paasche Extreme Air water based acrylic paint. (White, Black, Red Blue & Yellow) Paasche 1/4 HP Airbrush Compressor w/ TG-3F Gravity Feed Airbrush Set & Paints The Paasche TG is a double action gravity feed airbrush. The airbrush features a chrome plated body and anodized aluminum handle for durability. The TG is our finest detail airbrush allowing the user to achieve hair line detail and using our optional fan head wider patterns up to 3 inches. A PTFE packing allows the TG to handle any water or solvent based paint. Clean up is as simple as spraying your paint cleaner though the airbrush and wiping of the needle. The TG is best used for those requiring high end detail. Applications including automotive graphics, models, taxidermy, cake decorating, tattoos, finger nails, graphic arts, illustration, etc. The TG airbrush is made and assembled in the USA and includes the following. TG-3F Includes: TG#2 double action airbrush, .4oz cup, cup cover, size 1 & 3 heads, fan aircap, hanger, (2) wrenches, 6ft braided hose, lessons booklet and manual. Features:Airbrush Made In The USA Quality Precision materials for fine detail work Highly polished & hardened stainless steel needles for long life and reduced clogging Solvent proof needle packing allow spraying of water & solvent based paints Chrome plated body Specs: Part Number: TG-3F Type: Double Action, internal mix, gravity feed Head Size: Size 1(.25mm), size 2(.38mm), size 3(.66mm) Fluid Packing: PTFE - can spray solvent or water based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼-20 Paasche thread – adapters available Bottle size: N/A Spray Pattern: Hairline to 1-1/2 - with fan aircap up to 3 Finish: Chrome plated body The DC600R airbrush compressor With tank and case is perfect for any hobby or artist airbrush. The maximum operating pressure 1-50 PSI depending on airbrush being used. The DC600R is more powerful than the single head compressors and has a protective metal case. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8"BPS adaptor for competitor hoses. The compressor features include:Dual piston compressor Tank and protective case Regulator & moisture trap Two airbrush holders Delivers 1-50 PSI depending on airbrush being used Standard Paassche 1/4"NPT hose fitting 1/8" BPS hose adapter for competitor hoses Auto shutoff feature Carrying handle Quiet: noise level is 50 Db's Includes 1 year warranty from date of purchase Also Included is a five pack of Paasche Extreme Air water based acrylic paint. (White, Black, Red Blue & Yellow) Returns If you are not 100% satisfied with your purchase, you can return the product and get a refund. You can return a product for up to 30 days from the date you purchased. Any product you return must be in the same condition you received it and in the original packaging. Customer pays return shipping. Payment We accept payment by any of the following methods: PayPal & Major Credit Cards Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping Your order will be dispatched within 1-2 working day of receiving payment (Monday-Friday) and you should expect to receive it one or five days after dispatch. Tracking number will be on the invoice which will be e-mailed. The Paasche TG is a double action gravity feed airbrush. The airbrush features a chrome plated body and anodized aluminum handle for durability. The TG is our finest detail airbrush allowing the user to achieve hair line detail and using our optional fan head wider patterns up to 3 inches. A PTFE packing allows the TG to handle any water or solvent based paint. Clean up is as simple as spraying your paint cleaner though the airbrush and wiping of the needle. The TG is best used for those requiring high end detail. Applications including automotive graphics, models, taxidermy, cake decorating, tattoos, finger nails, graphic arts, illustration, etc. The TG airbrush is made and assembled in the USA and includes the following. TG-3F Includes: TG#2 double action airbrush, .4oz cup, cup cover, size 1 & 3 heads, fan aircap, hanger, (2) wrenches, 6ft braided hose, lessons booklet and manual. Features:Airbrush Made In The USA Quality Precision materials for fine detail work Highly polished & hardened stainless steel needles for long life and reduced clogging Solvent proof needle packing allow spraying of water & solvent based paints Chrome plated body Specs: Part Number: TG-3F Type: Double Action, internal mix, gravity feed Head Size: Size 1(.25mm), size 2(.38mm), size 3(.66mm) Fluid Packing: PTFE - can spray solvent or water based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼-20 Paasche thread – adapters available Bottle size: N/A Spray Pattern: Hairline to 1-1/2 - with fan aircap up to 3 Finish: Chrome plated body The DC600R airbrush compressor With tank and case is perfect for any hobby or artist airbrush. The maximum operating pressure 1-50 PSI depending on airbrush being used. The DC600R is more powerful than the single head compressors and has a protective metal case. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8"BPS adaptor for competitor hoses. The compressor features include:Dual piston compressor Tank and protective case Regulator & moisture trap Two airbrush holders Delivers 1-50 PSI depending on airbrush being used Standard Paassche 1/4"NPT hose fitting 1/8" BPS hose adapter for competitor hoses Auto shutoff feature Carrying handle Quiet: noise level is 50 Db's Includes 1 year warranty from date of purchase Also Included is a five pack of Paasche Extreme Air water based acrylic paint. (White, Black, Red Blue & Yellow)

Price: 391 USD

Location: Kenosha, Wisconsin

End Time: 2023-11-07T14:02:18.000Z

Shipping Cost: 0 USD