Obsidian Wire Custom Universal for Tele® With 3-Way Coil Split

Description: Quick and easy install without touching a soldering iron. ObsidianWire builds Pro-Wired Electronics for guitar and bass, with super sturdy and easy to use solder-less connectors. That means that you can install your new wiring harness, or do solder-less pickup changes, without having to set aside much more time than a string change. This wiring harness is a universal model made to be a perfect set for your humbucker loaded Telecaster, with an added fourth mode for two single coils for ultimate versatility. This harness also contains the Obsidian® coil split upgrade. This replaces the tone control with a push / pull pot for splitting your humbuckers to single coils, and back again. Humbuckers and single coils have different characteristics that require different things from a wiring harness to really let out their best qualities. The Obsidian® Universal for Tele® harness allows you to easily setup your harness to automatically optimize the controls for each switch position, and thus, each of your pickups. 500k Controls for your humbuckers – Clearer, fuller humbucker output. More resistance through your tone and volume controls means less treble escapes. 250k Controls for your single coils – Balanced single coil spank. The harsh highs of a raw single coil are sent to ground, leaving a harmonically rich but balanced single coil sound. To make your tone crystal clear at lower volumes we also include an Obsidian® Custom Spec Treble Bleed Mod. This prevents tone ‘muddiness’ at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control. This harness is the perfect match for you if you have Telecaster loaded with the below pickups: Mode 1. HH Tele® (Humbucker + Humbucker) Mode 2. HS Tele® (Humbucker Bridge + Single Coil Neck) Mode 3. SH Tele®(Single Coil Bridge + Humbucker Neck) Mode 4. SS Tele® (Two Single coils / traditional Tele® mode) Compatibility American series Fender® Telecasters – Direct Fit Mexican series Fender® Telecasters – Direct Fit Japanese Fender & Squiers – You will need to purchase a genuine Fender control plate and new 1/4″ knobs Does NOT Fit the following: Thinline Telecaster G & L ASAT – May be fitted with adjustments to control slot size & new genuine Fender USA control plate and new 1/4″ knobs Other Guitars – We cannot guarantee that these will fit any other guitar. Note: Aftermarket control plates will NOT fit. We recommend a genuine Fender control plate Use US spec 1/4″ Solid shaft controls. We recommend that you check your knobs are the correct size and replace them if necessary Features All ObsidianWire Pro-Wired Electronics are super easy to install, and allow for solder-less pickup changes with ObsidianWire Plug, Play & Enjoy connectors. Obsidian guitar wiring mods are designed for superior sound, with improved clarity and control. Universal for Single coils, single coil sized humbuckers, humbuckers and P90’s Full 5 Year Warranty https://youtu.be/7I9T73dkIXM Item Shown: Obsidian Wire Custom Universal for Tele® With 3-Way Coil Split Model #: OW-CUSTUNI-TC-SPLITC UPC: 9421904089181

Price: 159.99 CAD

Location: CA

End Time: 2024-08-27T21:00:40.000Z

Shipping Cost: 8.74 CAD