Non Contact Phase Sequence Meter With Frequency 50Hz/60Hz Automatic Recognition

Description: Non Contact Phase Sequence Meter With Frequency 50Hz/60Hz Automatic Recognition Batteries are not included in the package!! Introduction: The instrument adopts clamp non-contact inductive measurement, no need to dial open the wire, no need to contact the high-voltage bare wire, directly three super-inductive high-insulation clamp clamp three-phase wire insulation skin can be detected to detect the phase sequence, and at the same time, sound and light indication of the three-phase power supply phase sequence of the positive phase or reverse phase state. Technical Specifications： Technical Data FunctionsPhase checking (positive phase, reverse phase), live wire checking, simple power checking, missing phase judgment, disconnection finding, breakpoint locating, line maintenance. Power supply 9V battery for about 70 hours of continuous use.Measurement methodNon-contact wire clamping methodPosition of lead wiresThe measured wire is in the center of the jaws.Frequency50Hz/60Hz automatic recognitionLive power rangeAC70 to 1000V, 45/65Hz (sine wave continuous input), conductive detection.Measurement of maximum voltageAC1000VClampable wire sizeOutside diameter ø1.5mm～ø48mmdisplay[Positive phase] 4 phase detection lamps light up in clockwise direction.；[Reverse Phase] 4 phase detection lamps light up in counterclockwise direction in sequence;[Live power] L1, L2, L3 lamps are lit within the voltage setting range;[Out of phase] L1 or L2 or L3 lamp does not light;[Disconnected] L1 or L2 or L3 lamp does not light.Beep[Positive Phase] The instrument emits an intermittent short beep;[Reverse Phase] The instrument emits a continuous long beep.Battery checkPower POWER indicator is on after powering on; Low Battery LOW BATTERY light is on.Clamp Lead Length0.6mInstrument sizeLength 117.6mm x Width 81mm x Thickness 25mmAutomatic shutdownAfter about 6 minutes of powering on, the meter automatically shuts down to reduce battery consumptionBattery VoltageWhen the battery voltage drops to approximately 5.2V, the low battery voltage symbol is displayed to remind the battery to be replacedInstrument quality 260g Maximum power rating300mVAWorking temperature and humidity-10℃～55℃; below 80%rhStorage temperature and humidity-20℃～60℃; below 90%rhDielectric strength3.7kVrmsSuitable for safety regulationsEN61010-1:2001, EN61010-031:2002, Pollution class 2, CAT III (600V), Instantaneous overvoltage 6000V.

Price: 101 USD

Location: hefei, Anhui

End Time: 2025-01-05T04:26:35.000Z

Shipping Cost: 0 USD