Description: Product Details: This is for a full set of Panasonic branded replacement capacitors for the PCB of the DVD drive for your Nintendo GameCube.If you need to keep your console on for anywhere from 5-20 minutes before the disc can be read, this is the fix.The best way to test this is to keep the top case off, keep the internal fan completely away, and making the console heat up for about 20 minutes, then testing to see if the disc can now be read. This can also solve the RSOD or red screen of death, even if the 20 minute heat trick does not work, but this is not always the case!!This is considered an advanced install and not for amateurs! You must be familiar with soldering in SMD capacitors!Please check out the 4th image to see the orientation and location of the capacitors.PCB board is not included, this is only for the capacitors. If you would like the PCB recapped with a XENO installed, please refer to: https://www.ebay.com/itm/165282417360If you purchase 2 or more units, shipping will be upgraded to include tracking.Additional Information: The total time this installation should take you is upwards of 30 minutes.Removal of the original caps can be easy or difficult depending on the level of corrosion.The best way to remove the original caps is with a pair of needle nose pliers. There is a specific technique that requires you to push down on the cap while gripping it with the plier, then rotating back and forth until the cap is freed (rotating no more than 180 degrees in either direction to avoid ripping pads). You can rip pads so be very careful and practice on scrap boards before attempting this.Once the original caps are removed you will have to desolder and clean the pads before installation of this (keep in mind to desolder the original two legs from the original capacitors first, then copper braid the pad; don't use a cheap solder sucker, use braid).Add flux and position the cap in place on the pad, the flux will act like glue to keep the cap in place. Make sure the legs of the cap are positioned properly on the pads, this does not mean that cap labeling will be centered and oriented correctly, focus on the position of the legs on the pad, not the centering of the cap. Look at image #4 and you will notice that some caps look askew.The labeling of the caps may be different than what are shown in the ad; they are all genuine Panasonic capacitors from reputable US suppliers.All capacitors are sealed like as shown in the pictures. They will be placed in a reusable small anti-static bag.If the installation fails and you are absolutely sure that you did the installation correctly: check for physical board damage usually on the opposite side. Other points of failure on the DVD drive are the laser, the center spindle, and the lid sensor.Purchase this product with peace of mind knowing that I have experience installing these and can help you with the installation if need be. Shipping: Location Service 1st Item Additional USAUSPS Letter (No Tracking) FreeFreeUSAUSPS Ground Advantage $2FreeUSAUSPS Priority $7Free Insurance:Insurance is included on all purchases, protecting against loss or damage during transit. If you would like signature confirmation, it is an additional $2.65. If your package is stolen once delivered, USPS nor myself are responsible. If the order has a total cost (including shipping costs and any taxes) of $750 or more, the seller is required to purchase signature confirmation. Please contact me prior to your purchase if you are interested in this service. Return Policy:All items are guaranteed against D.O.A. (dead/defective on arrival). If by chance your item is non-functional upon arriving, or not as described in the ad, a refund will be given up to 30 days of ad closing. Refunds will only be granted based upon this criteria. Buyer must pay for return shipment, and actual shipping costs will be deducted from the refund as well. Item must be returned in original condition complete with all material. International Buyers:Please note that customs duties and taxes are solely the responsibility of the buyer. In addition, the time frame in which an international package takes to arrive might fluctuate based on it's clearance through customs. The USPS, eBay, or myself have no control over this aspect and will not be held responsible. For any further inquiries, feel more than free to contact me 24/7!!!Thanks for looking & have a great day!!
Price: 7.95 USD
Location: Central Islip, New York
End Time: 2024-03-25T04:00:21.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Type: Capacitors
Compatible Model: Nintendo GameCube
Brand: Nintendo