NEW Model MTS141Si 140 Amp MIG / TIG / Stick Compact Multi-Process Welder

Description: Power i-TIG 200T About UsContact UsShop PoliciesFAQFeedback SKU: PowerMTS141Si Product DescriptionThe PowerMTS 141Si is the ultimate solution for those customers who are on a search for a 120V portable all-in-one DC welder package. The unit features 140A MIG, 140A DC TIG and and 80A DC Stick welding ability. As a true MIG, TIG, Stick unit, there is no compromise with the abilility of any process to make a quality weld within the operation range. The MIG feature of the PowerMTS 141Si includes the ability to weld Aluminum with an optional spool gun or weld with Flux-Cored wire when equipped with Flux-Cored drive rolls. It supports the use of 4" and 8" rolls and the use of .023" and .030" wire. In TIG mode, the unit can weld Steel, Stainless, and even Titanium. While other similar competitor's models in its class feature a modified form of stick welding and use a scratch start TIG rig to support a very basic form of fixed Amperage TIG welding, the PowerMTS 141Si features HF and LIft Start TIG modes and allows the use of an optional foot pedal to start the arc and vary the Amperage just like a proper DC TIG welder should do. It also features built in solenoid for automatic gas control and even a separate gas inlet for TIG so that the connections don't have to be shared. As far as the 140A rating goes, it should be more than enough power to weld steel or stainless in multiple passes up to 1/4" thick, and more than enough for 1/8" in a single pass. As far as performance of stick function of the welder goes, it supports welding with popular 3/32" welding rods such as E7014, E7018 and most E6011 (however this unit is not designed for E6010 use).The simple control panel design and intuitive controls make the unit easy to learn and weld with. Even the bright blue LED display is designed to make the control panel more readable even in bright light. Conditions. Each component of the machine and design feature is meant to make the PowerMTS 141Si the best in its class for portability, useability, and performance. And when the 5 year parts and labor warranty are considered, nothing really comes close to the complete package that this machine really is. PRODUCT EXTRAS Features & Benefits: All digital DC CC/CV Multi-Process inverter design with a compact frame is designed for true portability in mind.Light weight design makes the unit extremely portable, ideal for jobsites and motorsports.4" and 8" Diameter wire spool capacity provides a good compromise for long duration welding and portability.Simple-to-use MIG, DC TIG and DC Stick operation.2T and 4T operation for MIG and TIG operation.Foot Pedal Capable (Foot pedal optional).Flux-Cored capable with optional drive rolls.Spool gun Capable for MIG.High Frequency Start and Lift Start Modes for TIG.2T/4T torch trigger/latch function offers stepped control welding with TIG and MIG.Auto Pre and Post Flow control for MIG and TIG.Separate gas connections in rear for MIG and TIG.Built in solenoid for automatic gas control in TIG mode. WHAT'S INCLUDED Standard Equipment: 15 Series MIG gun with 10 ft. cable and Euro style quick connect fitting17 Series TIG torch with 12 ft. cable and 35 series DINSE-style connectorStick Electrode holder with 10 ft. cable and 35 series DINSE-style connectorWork Clamp with 6 ft. cable and 35 series DINSE-style connectorArgon RegulatorStarter consumable TIG kit (does not include tungsten)Spare Contact tipDrive Roll V Groove .023"-.030" (Single) OPTION Optional Equipment: SM 100 Spool GunPolymer Liner for main gun feeding of Aluminum with optional U groove drive rolls.Nova Foot Pedal and Upgrade KitRECOMMENDED USES Recommended Areas of Use: Home/ HobbySmall Shops and GaragesMuffler and Exhaust Fab/RepairPortable RepairMotor Sports (At track repair/fabrication)Farm/RanchRecommended Metals: MIG: Steel, Stainless, Aluminum (Aluminum with spool gun or teflon liner)TIG: Steel, Stainless, TitaniumStick: Steel, Stainless TECH SPECS Type: Digital/Micro-controlled IGBT InverterOutput /Process Type: MIG, DC TIG, DC StickVoltage/phase: 120VMax Rated MIG Amps: 140AMax Rated TIG Amps: 140AMax Rated Stick Amps: 80AMIG Amps/Volts @ Rated Duty Cycle: 140A/21V @ 25% Duty Cycle/ 40°CTIG Output Amps/Volts @ Rated Duty Cycle: 140A/15.6V @ 25% Duty Cycle/ 40°CStick Amps/Volts @ Rated Duty Cycle: 80A/23.2V @ 25% Duty Cycle/ 40° CMax Inrush ( I1MAX ) Amps: 37AMaximum Rated (I1EFF ) Input Amps: 19AOCV: 70VMIG Output Range: 30-140A/ 15.5-21VTIG Output Range : 10-140A/ 10.4V-15.6VStick Output Range: 20-80A/20.8V-23.2VVariable MIG Inductance/Stick Arc Force Control: NoSpool Gun Capable: YesPulse: NoStandard Drive Roll wire size: .023”-.030”Separate wire feeder: No, self containedNumber of Drive rollers: 2Max Wire Feed Speed: 400 IPMMax Wire Roll Diameter: 8” (up to 12 lb)Memory: NoFoot Pedal: OptionalFlux Core: Yes, Optional2T/4T /Torch latch/Trigger: NoOther Features: 2T/4T NOTES Product Notes: This 120V unit can be operated on any clean power rated generator (5% or less THD) capable of producing 4500W (Surge Rating). Operation on under powered, or non-clean power rated units will void the warranty. Clean power ratings are determined by the generator manufacturer. Everlast does not determine this rating or test units for suitability. This unit is not designed for E6010 use. MINIMUM/MAXIMUM Minimum/Maximum: MIG:Weld a minimum of 24 gauge Steel/Stainless Weld a maximum of 3/16" Steel/Stainless single pass* Weld up to a maximum of 1/4" Steel/Stainless multi-pass For aluminum, choose the S100N MTS gun for best results. You may also purchase a polymer liner and U groove .035"/.045" 1 pc drive roll kit and use the standard 15 series MIG gun. Weld a minimum of 14 gauge Aluminum Weld a maximum of 1/8" Aluminum single Weld a maximum of 3/16" Aluminum multi-pass * Single pass welds greater than 1/4" are not recommended as a sound welding technique.* Single pass welds greater than 1/4" are not recommended as a sound welding technique.TIG: Weld up to a maximum of 1/8" single pass Weld up to a maximum of 1/4" multi-pass Ratings suggested for best practice and sound welding technique. More may be achieved with skill and practice.StickWeld with a maximum of 3/32" diameter electrodeWeld with a minimum of 1/16" diameter electrodeNot E6010 RatedBrand and type ultimately determines capability; consult mfgr of electrodes for amp recommendationNOTE: This unit is not designed to weld E6010 electrodes. Use E6011 instead. Returns For returns, contact must be made within72 hours of delivery so an RMA number is issued. If there is damage, we can help file a damage claim immediately. DOA items: In the event you receive a non working unit , we will exchange it free of charge. Items returned must be in an GOOD condition. We will inspect all returns before accepting the package. We will not accept packages that have missing parts, damages, and packages that have not been approved for return by our initial contact or packages missing an RMA number. These packages will be refused and sent back to YOU at your cost. Shipping Information: 1- We have an onsite professional shipping and packaging department and adhere to all shipping guidelines. 2- We will try to ship orders as soon as possible after payment approval unless otherwise stated in description. NOTE: Since there are many ways we offer our products, on rare occasions there is a chance an item may go out of stock that we have listed and sold on eBay. We will do our best to expedite backordered items as soon as possible. 3- Please provide a physical address. We will not ship to a PO Box. 4- Shipping charges are for the (48) Continental United States only. 5- We don’t ship to Canada 6- We charge CA tax on all orders 9.5% 7- If you pay via PayPal, shipping will be to your confirmed address only 8- Shipping to AK, HI and PR is more. please email for price. Contact Operating Hours: Monday through Friday: 9AM to 5PM PSTSaturday: 11AM to 4PM (PST)

Price: 574 USD

Location: Daly City, California

End Time: 2024-08-25T00:02:27.000Z

Shipping Cost: 40 USD