Network Cable Tester RJ45 - Network LAN Length Cable Tester Meter for Cat5, Cat

Description: ★【 LOCATES THE WIRING OR CONNECTION ERROR 】: Measures cable length and determine the distance of open circuit and short circuit.Permits you to check wiring error in 5E/6E twisted cord network, coaxial cable and telephone line.★【 HIGH QUALITY & ONE YEAR 】: Auto time delay shut off.Comes with 8 far-end passive test jack.Far-end recognizer with prompt voice.Single board computer software watchdog design and reliable operation.★【 LIGHTWEIGHT & EASY TO CARRY 】: Self-checking function and automatically compensates any change in battery capacity or ambient temperature.Simple and easy to use, big LCD screen to display test results. Compact, lightweight, easy to carry and use.★【 LONG BATTERY LIFE 】: Applicable for open circuit, short circuit, jumper wire, reverse connection or cross-talk interference.Dynamically calibrates cable length and make length measurement as accurate as 97%. Portable unit with long battery life (wait-case or standby mode for over 50 hours).★【 EASY TO USE 】: Efficient, effective, reliable. A person is enough to complete cable continuity check and cable sequence.Indicates pair integrity of the cable. Measure length and pair with or without far-end recognizer. Product Description Check wiring error in 5E, 6E, such as open circuit, short circuit, jumper wire, reverse connection, cross- over or cross-talk interference.Measure network cable length and determine the distance of broken point.8 remote identifiers enable users to test 8 cables at one time.Portable unit with long battery life (wait-case 50 hours).Memory function for calibration data.Self-checking and automatically compensate any change in battery capacity or ambient temperature.Automatically time-delay shut off. Open Circuit in far-end plug "R:"line"3" and"6" pins location display "x", this indicates an open circuit in far-end plug "3" and "6" pins, and that the open circuit is located nearby the far-end plug. Open Circuit in at the near-end plug "M:"The“3" pin location displays "X",which indicates an open circuit at the near-end plug-“3” pin,and that the open circuit is located close to the near-end plug. Open Circuit in the middle "｜" The“3" pin location displays “X”,which indicates an open circuit in the middle of the “3" pin cable. If pair and length measurement is conducted in normal conditions, it will display as shown. [Note]: Please do not connect remote units when testing length, and use a network cable with a length of 10m. If there is unpaired lines in the pair and length measurement, it will display the paired lines first.The last line-78 indicates there is no pair is in lines 7 and 8. It will display "X" to indicate an open circuit if the length is less than 90% of the other line pair length and the open circuit is located around 89.3m from the tester. Application Network engineering with remotes PoE/Network engineering with remote Network engineering and locating wire Locating buried wire Cable Continuity Test ✓ ✓ ✓ ✓ Loopback Test ✓ ✓ × × PoE Test × ✓ ✓ × Suitable for cable RJ45 cable RJ45/RJ11 cable RJ45/RJ11 cable Hidden and underground cables Cable Locator × × ✓ ✓ Remotes 8 Remotes ✓ × × Power Supply 1.5V battery 1.5V battery Rechargable 3.7V battery 9V battery LED Light × ✓ ✓ ✓ AC,DC Testing DC DC AC/DC AC/DC Type of Tester Cable: Check wiring error in 5E, 6E, such as open circuit, short circuit, jumper wire, reverse connection Tester Port: Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), far-end recognizer RJ45 port (R) Unit of Measurement: Display in meter (M) or feet (FT) Powered: By 4*1.5V AAA batteries (not included) Product contain: 1*Multi-Network Cable Tester 8*Far-End Test Jack 1*Instruction Manual Automatic Time: Delay Shut Off Time; The tester is idle for 30 minutes Size: 3.2*7.1*1.5“ / 8.2*18*3.8cm Net Weight: 7.4oz / 0.21kg

Price: 84.99 USD

Location: Denver, Colorado

End Time: 2024-12-21T12:46:15.000Z

Shipping Cost: 0 USD