NetScout Fluke Networks AirCheck G2 Wi-Fi Wireless Network Tester Air-Check

Description: The Following Items Are Included: NetScout AirCheck G2 Wi-Fi Wireless Network Tester (BC# 32494-L/T*) Netscout Antenna Ethernet Cable AC Adapter/Charger Power Cord User Manual On CD-ROM Case For Unit Carrying Case (G) BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! NetScout AirCheck G2 Wi-Fi Wireless Network Tester The AirCheck G2 Wireless Tester provides fast, simple, and accurate isolation and troubleshooting, thereby reducing the time to resolution of wireless issuesIncludes Carrying Case & Accessories As Listed Above! Working Condition: ExcellentCondition: RefurbishedWarranty: 1 YEAR WARRANTY NetScout Aircheck G2 Wireless Tester Wi-Fi is a complex technology, but testing it doesn’t have to be. AirCheck™ G2 Wireless tester is purpose built for the front-line IT responders dispatched to the complaints of: The Wi-Fi is not working or the Internet is down. The AirCheck G2 Wireless Tester provides fast, simple, and accurate isolation and troubleshooting, thereby reducing the time to resolution of wireless issues. The intuitive user interface and management platform provides actionable intelligence to not only remove the complexity of wireless troubleshooting but also helps speed up closure of the trouble ticket. The cost of not getting the job done right the first time, leads to ineffective usage of the escalation team efforts and end-user dissatisfaction due to slow problemsolving response time. AirCheck G2 provides front-line IT with complete and accurate wireless information to solve problems right the first time, instead of blindly escalating them. There are many variables that lead to Wi-Fi complaints, ranging from networkbased problems and configuration issues to environmental or client device misconfigurations. Collecting all the key pieces of information the very first time is key to every front-line IT responder to resolve any complaint. AirCheck G2 simplifies wireless troubleshooting by providing: A rugged, purpose-built wireless tester supporting the latest Wi-Fi technologies (802.11a/b/g/n/ac) that’s easy to use and easy to carry A one-button AutoTest, which quickly provides a pass/fail indication of the wireless environment and identifies common problems — for any level of Wi-Fi expertise Quick connection to wireless networks to verify network availability, connectivity, performance, and access to networked resources A centralized test results management platform, Link-Live, that facilitates greater job visibility, results archiving, project control, and fleet management for larger distributed environments AirCheck G2 integrates Wi-Fi technology plus interference detection, channel scanning, connectivity tests, and iPerf performance testing. The one-button AutoTest an instant access to detailed information provides fast troubleshooting for the most common Wi-Fi pain points, including: Coverage problems Overloaded networks or channels Slow connections Connectivity problems Failed access points Rogue access points Client problems Unauthorized clients Primary Features The AirCheck G2 provides instant access to network, channel, access point, client, and interference data immediately off the main screen along with push-button tests for wireless as well as wired. Networks Quickly view all the networks present in the environment, and see critical parameters for each one including signal level, signal/noise ratio, security type, and number of access points. Find common issues such as mixed security types, poor signal coverage or lack of secondary AP coverage. Sort or filter on any parameter. Then drill into more details for any network, including 802.11 types supported, number of connected clients, channels and more. From the network details page, drill into a list of APs or clients on the network. Channels Quickly determine if channels are over-utilized with 802.11 Wi-Fi traffic and/or with non-Wi-Fi interference and noise. Devices that can cause interference include microwave ovens, wireless game controllers, Bluetooth® devices, ZigBee devices and wireless video cameras. Drill in to see the level of Wi-Fi traffic and interference over the last 60 seconds on a selected channel, as well as the access points and clients using this channel. Access Points Quickly view all the APs present in the environment, and see critical parameters for each one including signal level, signal/noise ratio, security type, and channel. Find common issues such as incorrect security type, poor signal coverage or incorrect channel. Sort or filter on any parameter. Then drill into more details for any AP, including number of connected clients, supported rates, 802.11n and 802.11ac capabilities and more. From the AP details page, drill into a list of connected clients or the channel on which the AP operates to verify any channel utilization or co-channel interference problems. Set Access Control status for APs in the environment to track Authorized, Neighboring, and potential rogue devices in your network space. Clients Quickly view all the client devices that are connected to a network or probing for one. See critical parameters for each one including signal level, channel and connected AP. Find common issues such as clients connected to the wrong AP or unrecognized client devices connected to the network. Sort or filter on any parameter. Then drill into more details for any client, including connection rate and security type. From the Client details page, drill into the connected channel or quickly locate the client device. Interferers Other devices can operate on the same bands as your Access Points. Get visibility into what other devices may be in your environment interfering with your wireless network. Drill in for more details for any interference event, including average power level, duty cycle, channels impacted, and last seen time. Then use the LOCATE function to track them down and remove an interfering device. AutoTest AutoTest performs the following essential Wi-Fi tests and gives a pass/fail indication of the wireless environment as well as identifies common problems — for any level of expertise. 802.11 UTILIZATION Reports the top three channels in each band (2.4 GHz and 5 GHz) with the highest 802.11 Wi-Fi traffic airtime utilization. NON-802.11 UTILIZATION Reports the top three channels in each band (2.4 GHz and 5 GHz) with the highest non-802.11 airtime utilization. This indicates the presence of interference sources and high-noise levels. CO-CHANNEL INTERFERENCE Reports the top three channels in each band (2.4 GHz and 5 GHz) with the most APs on the same channel that exceed the minimum signal level threshold. It accounts for 40-MHz and 80-MHz channels in the 5-GHz band by counting an AP on its primary and each secondary channel. Then view a list of the APs counted for co-channel interference. ADJACENT CHANNEL INTERFERENCE Reports the top three channels in the 2.4 GHz band in which APs may experience Adjacent Channel Interference. For each channel on which at least one AP is found, the tester counts how many APs are operating on other channels that overlap with that channel. It accounts for 20-MHz and 40-MHz channels in the 2.4-GHz band. Then view a list of the APs counted for adjacent channel interference. NETWORK QUALITY Verifies coverage, interference, security and ability to connect to specified networks, along with the availability of critical network services such as DHCP and connectivity to specified network targets ROGUE DEVICES Reports Access Points other than your authorized devices. These devices may be on the network compromising network security Ethernet Test Access points must have a working backhaul connection to the network, and the AirCheck G2’s built-in Ethernet test validates that. Diagnose and test Power over Ethernet (PoE), Link to the switch, DHCP, Gateway, and Internet connection. Get VLAN, switch name, and port information via CDP/LLDP/EDP for your managed switches. Drill Into Specific Details For all devices and events discovered by the AirCheck G2, additional information is available to better understand the specifics of a device and aid in troubleshooting. There's no need for the user to try to compare information in a beacon or parse through association requests to get full capability information on Access Points and Clients. Additional Tools and Functionality In addition to the primary screens, there are several additional capabilities and features in the AirCheck G2 to allow users to quickly test and validate their wireless network. These are available as further options off the various detail and devices screens. Connect to a Network Verify network availability and access to critical services by connecting to a network (SSID) or AP with a single touch on the Connect button. Key test steps include: Associate to an AP Request and receive an IP address from a DHCP server Ping the default gateway and DNS servers for availability Perform a ping or TCP port test to up to ten network targets Ongoing signal level, signal/noise ratio, and retry rate measurements Run an iPerf performance test Once connected to a network or an Access Point, an iPerf based performance test can be run to check the throughput at that location. Tests are run for both upload and download traffic and can be configured for: Protocol to use (TCP vs. UDP) What port to initiate the test on Duration to run the performance test for When running an iPerf test, the user can elect to either use an iPerf server that they set up themselves, or they can choose to use the iPerf server running on NETSCOUT's Test Accessory. The Test Accessory is a small device, powered by PoE or battery, that plugs into an ethernet port and with the AirCheck G2 can act as essentially an iPerf server in your pocket. It is managed by NETSCOUT's Link-Live cloud management platform and is automatically discovered by the AirCheck if: It is on the same subnet as the AirCheck's wireless connection It is on the same subnet as the AirCheck's last Ethernet test It has been adopted into the same Link-Live organization as the user's AirCheck G2, and the AirCheck G2 has Link-Live connectivity With the Test Accessory, it's as simple as picking the device you want from a list on the screen, and then starting the test. Run a roaming test The AirCheck G2 provides a roaming test that allows the user to verify that a network has sufficient overlap to allow for smooth and seamless roaming throughout the site. Roaming tests can be performed after connecting to a Network. The AirCheck G2 will continually ping a user chosen target resource and will provide detailed information on the current network quality and ping statistics as the user moves throughout the site. Locate devices of interest Track down rogue APs and unauthorized clients by following the real-time signal level meter and graph over time. Audible indication is provided, and the use of a USB headset for private audio is supported. Drill in to see the level of Wi-Fi traffic and interference over the last 60 seconds on a selected channel, as well as the access points and clients using this channel. Specifications: General Specifications Dimensions 3.8 in x 7.7 in x 1.6 in (9.7 cm x 19.6 cm x 4.1 cm) Weight 18 oz (0.51 kg) Battery Rechargeable lithium-ion battery pack (3.6 V, 6 Ah, 21 Wh) Battery life Typical operating life is 4.5 hours. Typical charge time is 7 hours External AC adapter/charger AC input 85-264 Vac 47-63 Hz input power DC output 15 Vdc at 2 amps Display 5.0-inch color LCD with capacitive touch screen (480 x 800 pixels) Keypad -1key elastomeric (power only) Host Interface 1x micro USB Type B port Adjunct Interface 2x USB 2.0 Type A port External antenna port 3x Internal External antenna port Input only. Reverse-polarity SMA connector Environmental Specifications Operating Temperature 32ºF to 113ºF (0ºC to +45ºC) The battery will not charge if the internal temperature of the tester is above 122ºF (50ºC) Operating relative humidity 90% (50ºF to 95ºF; 10ºC to 35ºC) 75% (95ºF to 113ºF; 35ºC to 45ºC) Storage temperature -4ºF to 140ºF (-20ºC to +60ºC) Shock and vibration 1 m drop test, Random, 3.8 g, 5 Hz-500 Hz Safety IEC 61010-1: Pollution degree 2 Altitude 4,000 m; Storage: 12,000 m EMC IEC 61326-1: Basic Electromagnetic Environment; CISPR 11: Group 1, Class A Wireless Specifications Specification compliance IEEE 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac Wi-Fi Connectivity 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac Operating frequencies Frequencies of channels received: The tester receives on all of the frequencies in every country. 2.4 GHz band: 2.412 – 2.484 GHz (channel 1 to channel 14) 5 GHz band: 5.170 – 5.320 GHz, 5.500 – 5.700 GHz, 5.745 – 5.825 GHz (channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144, 149, 153, 157, 161, 165) Frequencies of channels transmitted: The tester transmits only on the frequencies allowed in the country where it is operating. 2.4 GHz band 802.11b: 2.412 – 2.484 GHz (channel 1 to channel 14) 802.11g/n; 20 MHz BW (HT20): 2.412 – 2.472 GHz (channel 1 to channel 13) 802.11n; 40 MHz BW (HT40): 2.422 – 2.462 GHz (includes all combinations of legal, bonded pairs of channels) Wi-Fi Antennas Internal Wi-Fi antennas Three internal 2.4 GHz, 1.1 dBi peak, 5 GHz, 3.2 dBi peak antennas. External directional antenna Antenna, frequency range 2.4 - 2.5 and 4.9 - 5.9 GHz. Minimum gain 5.0 dBi peak in the 2.4 GHz band, and 7.0 dBi peak in the 5 GHz band. External antenna connector Reverse SMA Supported operating systems Windows 7, Windows 8.1, Windows 10 Processor 400 MHz Pentium processor or equivalent (minimum); 1 GHz Pentium processor or equivalent (recommended) RAM 96 MB (minimum) RAM 256 MB (minimum); 512 MB (recommended) Hard disk Up to 500 MB of available space may be required Display 1280 x 1024 high color, 32-bit (recommended) Certifications and Compliance Conformite Europeene. Conforms to the requirements of the European Union and the European Free Trade Association (EFTA). The product complies with Australian standards. Listed by Canadian Standards. Complies with 47 CFR Part 15 requirements of the U.S. Federal Communications Commission. Certified by the National Agency of Telecommunications (Anatel). Conforms to relevant South Korean EMC Standards. For full NetScout AirCheck G2 product specifications, please click here: NetScout AirCheck G2 Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Sell Smarter with Kyozou.Inventory and Ecommerce Management

Price: 2699 USD

Location: Southgate, Michigan

End Time: 2024-10-17T19:42:16.000Z

Shipping Cost: N/A USD