Multi-function Magnetic Base Drill Electromagnet Magnetic Drill Bench Drill New

Description: Multi-function Magnetic Base Drill Electromagnet Magnetic Drill Bench Drill New Voltage 110V Power Input 1150W Max.attraction 11000N Rate frequency 60Hz No-load speed 0-880rpm Core drill dia / Twist drill dia 13mm Max tapping dia M8 N/G weight 23.4lb(10.6kg)/25.4lb（11.5kg） Package Size 13.9*6.3*13.6in(35*16*34.5cm) Control Panel Two switches, respectively control machine operation and magnetic base, easy to operate. Magnetic Base Super suction magnetic seat, suction more than 11000N, safe and reliable, side suction can be suction. Guide Rail Design Double dovetail guide rail design, high strength wear- resistant treatment, more durable. Speed Adjustable Stepless speed regulation, between 100-670rpm, arbitrary adjustment. Lifting Handle Rocker type lifting handle, can accurately control the height of the head lifting. Level By observing the level, determine whether the machine is in a horizontal position. Operation Precautions 1. Insert the power plug, align the drill bit with the machining position, and then turn on the electromagnetic switch. Use a magnet to adsorb onto the surface of magnetic materials such as steel, ensuring that there are no debris on the surface, and check if the magnetic force is normal. The required thickness of the steel plate should be at least 6 millimeters or more on the flat surface. 2. Place the magnetic drill near the required drilling area, select suitable adsorption materials, and thread one end of the safety belt into the lifting hole of the rack. Tie the other end to a sturdy support and thread it in with a 100mm outlet. Then tighten the bolts of the fasteners and try to pull them with force without loosening or shifting. 3.Open the drill switch, check whether the drill is beating, the sound is smooth, if everything is normal, you can turn the handle to feed. 4. The beginning of the feed should be slow, not hard, the feed amount is generally about 0.05mm, do not exert too much force to prevent overload. 5. If the drill suddenly stops for some reason, the power switch must be turned off immediately (please turn off the magnetic base control switch). 6. Continuous use of 2-3 hours after the need to rest for a period of time to prevent the magnetic seat due to overheating and burn out. Item Number: Multi-function Magnetic Base Drill Electromagnet Magnetic Drill Bench Drill New On Nov 11, 2024 at 01:38:17 PST, seller added the following information:

Price: 328.06 USD

Location: Rancho Cucamonga, California

End Time: 2025-01-11T17:00:01.000Z

Shipping Cost: 0 USD