MixPac MixCoat 1125ML 2:1 Cartridges for MixCoat 2-part Spray Coating System (AF

Description: MixPac MixCoat 1125ML 2:1 Cartridges for MixCoat 2-part Spray Coating System (AF 1125-02-14-01 or AF 1125-02-30-01) (153469 or 128074) MixPac 1125ML 2:1 Cartridges for MixCoat 2-part Spray Coating System. Empty 1125ML 2:1 Cartridges in the F-System style for 2:1 ratio liquid spray-on coatings, adhesives, lubricants, etc. These cartridges includ the Resealable Cap, Plug and Sealing Pistons. Each cartridge includes the necessary cap and Sealing Pistons to close and seal the empty Cartridges. Mixing nozzles and other accessories sold separately above in banner ribbon MedMix MixPac (Sulzer) Cartridge Part Number, refer to table below. High-Density 2-Part (dual-component) 2:1 ratio 1125ml empty Adhesive Cartridge, with included Resealable Cap and Sealing Pistons. Ratio Volume Part ID Part Number Plastic Material Piston Style Bulk Units / Pallet Mixer Style 1:1 1500ml (50.7oz) 153493 AF 1500-01-14-01 PP Self-venting 418 F-System 166293 AF 1500-01-14-05 PP Self-venting 418 F-System 128218 AF 1500-01-30-01 PA Self-venting 418 F-System 2:1 1125ml (38oz) 153469 AF 1125-02-14-01 PP Self-venting 532 F-System 128074 AF 1125-02-30-01 PA Self-venting 532 F-System 3:1 1000ml (33.8oz) 153495 AF 1000-03-14-01 PP Self-venting 627 F-System 128216 AF 1000-03-30-01 PA Self-venting 627 F-System 4:1 940ml (31.8oz) 153494 AF 940-04-14-01 PP Self-venting 684 F-System 128080 AF 940-04-30-01 PA Self-venting 684 F-System NOTE: With these empty Cartridges, you will need additional accessories: a dispensing product and mixing Nozzles to push/extrude/dispense the adhesive out. We recommend also getting one of our 1125ml Dispensers, and some F-System mixing Nozzles, which will enable you to dispense the adhesives out of these Cartridges. These empty Cartridges can be used to fill, store, and dispense. It's perfect for storing and applying bulk adhesives that use a 2:1 mix ratio, where precise metering and mixing is needed. for example, 2-part adhesives, epoxies, silicones, urethanes, and other 2-part fluids and compounds. These 2-Part Cartridges are industrial grade and silicone free. The Cartridge design/fit using the industrial standard "F-System" template. The 2-Part design keeps the two adhesive parts separate, until a separate mixing Nozzle is attached, where the two parts are pushed or extruded into the mixing Nozzle and bonding or curing begins. Dispensers are available for all size Cartridges either in manual of pneumatic. The “F” System is comprised of a hand-held manual Dispenser which dispenses 2-component adhesives through “F” System Cartridges and motionless mixers. Cartridge systems are available in a variety of volumetric ratios. Please be sure to select the correct ratio for your two component system. MixPac MixCoat 1125ML 2:1 Cartridges for MixCoat 2-part Spray Coating System (AF 1125-02-14-01 or AF 1125-02-30-01) (153469 or 128074) MixPac 1125ML 2:1 Cartridges for MixCoat 2-part Spray Coating System. Empty 1125ML 2:1 Cartridges in the F-System style for 2:1 ratio liquid spray-on coatings, adhesives, lubricants, etc. These cartridges includ the Resealable Cap, Plug and Sealing Pistons. Each cartridge includes the necessary cap and Sealing Pistons to close and seal the empty Cartridges. Mixing nozzles and other accessories sold separately above in banner ribbon MedMix MixPac (Sulzer) Cartridge Part Number, refer to table below. High-Density 2-Part (dual-component) 2:1 ratio 1125ml empty Adhesive Cartridge, with included Resealable Cap and Sealing Pistons. Ratio Volume Part ID Part Number Plastic Material Piston Style Bulk Units / Pallet Mixer Style 1:1 1500ml (50.7oz) 153493 AF 1500-01-14-01 PP Self-venting 418 F-System 166293 AF 1500-01-14-05 PP Self-venting 418 F-System 128218 AF 1500-01-30-01 PA Self-venting 418 F-System 2:1 1125ml (38oz) 153469 AF 1125-02-14-01 PP Self-venting 532 F-System 128074 AF 1125-02-30-01 PA Self-venting 532 F-System 3:1 1000ml (33.8oz) 153495 AF 1000-03-14-01 PP Self-venting 627 F-System 128216 AF 1000-03-30-01 PA Self-venting 627 F-System 4:1 940ml (31.8oz) 153494 AF 940-04-14-01 PP Self-venting 684 F-System 128080 AF 940-04-30-01 PA Self-venting 684 F-System NOTE: With these empty Cartridges, you will need additional accessories: a dispensing product and mixing Nozzles to push/extrude/dispense the adhesive out. We recommend also getting one of our 1125ml Dispensers, and some F-System mixing Nozzles, which will enable you to dispense the adhesives out of these Cartridges. These empty Cartridges can be uséd to fill, store, and dispense. It's perfect for storing and applying bulk adhesives that use a 2:1 mix ratio, where precise metering and mixing is needed. for example, 2-part adhesives, epoxies, silicones, urethanes, and other 2-part fluids and compounds. These 2-Part Cartridges are industrial grade and silicone free. The Cartridge design/fit using the industrial standard "F-System" template. The 2-Part design keeps the two adhesive parts separate, until a separate mixing Nozzle is attached, where the two parts are pushed or extruded into the mixing Nozzle and bonding or curing begins. Dispensers are available for all size Cartridges either in manual of pneumatic. The “F” System is comprised of a hand-held manual Dispenser which dispenses 2-component adhesives through “F” System Cartridges and motionless mixers. Cartridge systems are available in a variety of volumetric ratios. Please be sure to select the correct ratio for your two component system. × × × × × Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Paying via Direct Deposit Simply add the freight cost to the item cost and forward the total amount to the address to be provided following your purchase. Additional Information No additional information at this time Ask seller a question You might also like MixPac MAQ 05-16L Quadro Square 3.25-inch 16-element High-Efficiency Mixing Nozz Jensen Steel Straight 14-Gauge Dispensing Tips Olive (Push-On & Luer-Lock) - 1/2 Maven Replacement Parts - Female Cross-Fitting High-Pressure Brass Pipe Fitting: Leister Turbo Nozzle (ø 62mm), air outlet 110.582 Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © Perigee Direct Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 17.95 USD

Location: North Richland Hills, Texas

End Time: 2024-12-15T02:37:27.000Z

Shipping Cost: N/A USD