Description: PIC24FJ128GB108-I/PTGeneral Purpose USB MicrocontrollerIdeal for low power (<100nA standby current) and connectivity applications that benefit from the availability of multiple serial ports (3xI2C, 3xSPI), 4xUARTS, and 23 independent timers. Large amounts of RAM (16kB) memory for buffering and large Enhanced Flash program memory make it ideal for embedded control and monitoring applications. PPS (peripheral pin select) aids in configuring the most efficient pin configuration of available I/O, and CTMU provides touch support for up to 64 individual buttons. Supports USB 2.0 for device, Host, and OTG with a complete and free software stack that includes a thumb drive application stack. FEATURESUniversal Serial Bus FeaturesUSB v2.0 On-the-Go compliantDual role capable, can act as either Host or DeviceLow speed(1.5Mb/s) and full speed(12 Mb/s) operation in host modeFull speed USB operation in Device modeSupports 32 endpointsOn-chip USB transceiverCPUUp to 16 MIPS performance16 x 16 Hardware Multiply, Single Cycle Execution12-bit x 16-bit Hardware DividerC Compiler Optimized Instruction SetLow Power nanoWattRun, Idle and Sleep modesMultiple, Switchable Clock Modes for Optimum Performance and Power ManagementRun mode: 1 mA/MIPS, 2.0V TypicalSleep mode Current Down to 100 nA TypicalStandby Current with 32 kHz Oscillator:2.5 uA,2.0V typicalFlash Program MemorySelf-Reprogrammable under Software Control10,000 erase/write cycles20 year data retentionEEprom emulation capableSystemInternal oscillator support - 31 kHz to 8 MHz, up to 32 MHz with 4X PLLOn-chip LDO Voltage RegulatorJTAG Boundary Scan and Flash Memory Program SupportFail-Safe Clock Monitor – allows safe shutdown if clock failsWatchdog Timer with separate RC oscillatorAnalog Features10-bit ADC, 16 channels, 500k samples per secondThree Analog comparatorsPeripheralsCTMU supports Capacitive Touch applicationsPeripheral Pin Select allows I/O remapping of many peripherals in real time4xUART Modules with LIN and IrDA support, 4 Deep FIFO3xSPI ™ Modules with 8 Deep FIFO3xI2C™ Modules with Master and Slave ModesFive 16-bit Timer ModulesUp to 9 Input Capture and 9 Output Compare/PWM with dedicated time baseHardware RTCC, Real-Time Clock Calendar with AlarmsPMP, Parallel Master Port, with 16 Address Lines, and 8/16-bit Data
Price: 499.98 USD
Location: Belton, Missouri
End Time: 2024-10-09T23:04:55.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
Item Length: 12.0 mm
Maximum Input Current: 100nA
Minimum Operating Temperature: -40 °C (-40 °F)
Brand: Microchip
Minimum Operating Voltage: 2 V
Type: USB Microcontroller
Memory Size: 128 kbit
Minimum Breakdown Voltage: 3.6 V
Maximum Clock Frequency: 32 MHz
Item Height: 1.0 mm
Number of Pins: 80
Packaging: Tray
Number of I/Os: 9
Maximum Operating Temperature: 85 °C (185 °F)
Features: Flexible Modes of Operation, Low Power Mode, On-chip Clock, On-chip Watchdog Timer, Self-Programming, Voltage Detector (LVD), On Chip USB Transceiver, On-chip LDO Voltage Regulator, 10,000 erase/write cycles, JTAG Boundary Scan and Flash Memory Program Support, 10-bit ADC, 16 channels, 500k samples per second, Three Analog comparators, CTMU supports Capacitive Touch applications, Peripheral Pin Select - remapping multiple I/Os in real time, 4xUART Modules with LIN and IrDA support, 4 Deep FIFO, 3xSPI ™ Modules with 8 Deep FIFO, 3xI2C™ Modules with Master and Slave Modes, Five 16-bit Timer Modules, Hardware RTCC, Real-Time Clock Calendar with Alarms, PMP, Parallel Master Port, with 16 Address Lines, & 8/16-bit Data
Unit Quantity: 1 lot of 119 microcontroller chips
Interface Type: USB
Item Width: 12.0 mm
Maximum Operating Voltage: 3.6 V
