MB Quart MBQX-STG3-1 X3 Radio, Speakers, Sub, Panels, Amps

Description: Product highlightsmarine digital media receiver (does not play CDs) system includes 6-1/2" speakers, 10" subwoofer, 2-channel amp, mono amp, speaker and sub enclosures, installation parts and wiring compatible with Smart-Lok MB Quart GMR-LED marine digital media receiver (does not play CDs) built-in amplifier (20 watts RMS/40 peak x 4 channels) built-in Bluetooth connectivity works with Apple and Android smartphones global AM/FM/Weather tuner inputs: AUX in, USB port, video/camera input outputs: 6-channel preamp outs (4-volt front, rear, sub), video out independent subwoofer level control with selectable low pass filter warranty: 1 year MB Quart NP1-116 6-1/2" Nautic marine speakers power handling up to 60 watts RMS (120 watts peak) designed to marine and off-road use 1" titanium dome tweeters Santoprene rubber surrounds warranty: 1 year MB Quart MBQX-SUB-2 10" marine subwoofer handles up to 400 watts peak power enclosure mounts under front seat dual voice coils PIX67-rated warranty: 1 year MB Quart NA2-400.2 2-channel amp Class D design 100 watts RMS x 2 at 4 ohms frequency response: 20-20,000 Hz low pass crossover and bass boost conformal-coated circuit board — suitable for power sports and marine applications warranty: 1 year MB Quart NA2-400.1 mono subwoofer amp Class D design frequency response: 10-300 Hz power specs: 200 watts RMS x 1 at 4 ohms (400 watts x 1 at 2 ohms) electronic crossover warranty: 1 year What's in the boxThis package contains 6 individually boxed items along with a QR Code for installation instructions: GMR-LED&X3 Dash Kit: Marine digital media receiver w/ inline 10A & 1A fuses Wiring harness Mounting bracket (pre-installed on radio) 2 Threaded studs/posts (pre-installed) 4 Nuts (pre-installed) 2 Lock-washers (pre-installed) 2 Front-covers (pre-installed) Four 1-1/4" Screws 2 Nuts Operator's Guide NA2-400.2 Amplifier: 2-Channel amplifier w/ attached 8" power/ground and speaker output harnesses (terminated with Molex plugs) 16" Power/ground harness (inline 30A ATC fuse) 16" Speaker output harness Four 18mm screws Quickstart guide MBQX-POD-1: Two NP1-116 6.5" coaxial speakers pre-mounted into left and right side mounting panels NA2-400.1: Mono amplifier (attached 7" 3-pin & 2-pin harnesses) 16" Power/ground harness (inline 30A ATC fuse) 16" 2-Pin speaker harness Four 3/4" screws 4 Flat-washers 4 Lock-washers Remote level control (attached 15.5' cable w/ Molex connector) Amplifier installation guide MBQX-SUB-2: Loaded 10" subwoofer enclosure w/ attached 20" wire harness 2 Mounting brackets Three 6-1/2" strips of foam padding (3M adhesive backing) Two 2" aluminum spacers One 1/2" plastic spacer Six 3/4" bolts Two 1" Torx screws (T-30) 2 Nylock nuts 2 Large flat-washers 12 Small flat-washers 6 Lock-washers MBQX-ACC-1: Amplifier mounting plate 7.5' Power harness (inline 70A Maxi fuse) 5' Speaker output splitter harness 7.5' Right rear speaker harness 7.5' Left rear speaker harness 32" 4-Seat extension harness 6' Subwoofer harness Two 3' stereo RCA cables One 12" RCA cable Two 8.5" RCA splitters (1 male to 2 female ends) Two 4.5" LED jumper/splitters Ten 7" wire ties Eleven 12mm screws 8 Flat-washers 8 Nylock nuts About this itemWritten by Crutchfield's Jon Paul Big-time sound for the great outdoors Can-Am's Maverick X3 is a high-performance side-by-side with plenty of power, and MB Quart's Stage 3 kit will make your Maverick sound as good as it performs. With a marine digital media receiver, 6-1/2" marine speakers, a 2-channel amp, a mono sub amp, and a 10" subwoofer, this system will add even more fun to your off-road adventures. MB Quart designed this package to fit right into your Maverick, with no cutting and minimal hassle. It also comes with all the parts and pieces needed for a smooth, hassle-free installation. Each component is tough enough for trail duty, so you won't have to worry about your system getting swamped. A rugged receiver that fits right in The MB Quart GMR-LED digital media receiver packs a lot of cool stuff into a compact, outdoor-ready package that's made for your Maverick. This AM/FM/WB receiver features built-in Bluetooth®, so you can pair up quickly and stream music stored on your phone. If you have an Apple device, you'll appreciate the convenience of Apple Control. If you prefer to plug in, you'll find an AUX input and a charging USB input. If you want to expand your system later, the GMR-LED features a full set of preamp outputs, along with a handy camera input. This kit includes a custom-designed dash panel that holds the receiver and blends into your Maverick's dash. Dash speakers made for your Maverick The package includes a pair of NP1-116 Nautic marine speakers that are built for off-road and marine use. The durable poly cones withstand moisture and sunlight, as do the 1" titanium dome tweeters. They're really easy to install, too, thanks to the made-for-the-Maverick X3 speaker enclosures included in this kit. They're easy to install and the left speaker panel works with your Maverick's Smart-Lok™. Get your power from a 2-channel amp MB Quart's NA2-400.2 amplifier packs a lot of power into a small package that's perfect for powersports applications. This rugged Class D amp delivers 100 watts per channel at 4 ohms, so your speakers will get the juice they need. A 10" sub and a mono amp This kit includes a marine-rated MB Quart MBQX-SUB-2 10" sub enclosure that bolts right into your Maverick X3 using the included direct-fit enclosure. The enclosure is made from a durable composite material that blends right into your ride and stands up to life on the trail. The power for this beefy underseat sub comes from the MB Quart NA2-400.1 powersports mono amp. With 400 watts of max power, on-board equalization and quick release connectors, installation is easy and you'll really feel the bass when you're on the trail.

Price: 1499.99 USD

Location: Charlottesville, Virginia

End Time: 2024-08-12T02:35:05.000Z

Shipping Cost: 0 USD