LSX and LS Oil Cooler Adapter with Thermostat, Rear Sump, 180ºF

Description: Improved Racing's thermostatic oil cooler adapters make it easy to add a performance oil cooler to your LS-family engine. The built-in thermostat automatically bypasses the cooler until safe operating temperatures are reached. No more worrying about over-cooling engine oil or long warm-up times! This "bottom inlet" thermostatic oil cooler adapter is easy to install in the 5th generation Camaro and Pontiac G8 as it does not require adjusting the knock sensor to clear the oil lines. Unlike many other oil cooler adapters, it will also clear the LSX and Dart LS Next engine blocks without modification. The thermostat block features an additional port which may be used for a 1/8" NPT or M12 sensor or as an oil feed for an oil accumulator or a turbo. For the C5 Corvette, choose the M12 sensor port option to retain use of the factory oil temperature sensor. The factory sensor will plug right in; no need to extend the sensor harness. The adapter features standard female -8AN O-ring boss ports that accept optional male adapter fittings for -8AN, -10AN or -12AN lines. Features and Benefits Bolts to most rear-sump LS engine oil pans with factory style oil bypass cover Clears the LSX and Dart LS Next engine blocks without modification Ideal for the 5th Generation Camaro and Pontiac G8 "Bottom inlet" port may provide better clearance for some long-tube header setups 100% bolt-on in the factory oil cooler adapter location, just above the oil filter Built-in thermostat helps reduce engine wear and horsepower losses by preventing oil temperatures from dropping below optimal levels Maintains a minimum oil temperature of 180°F (82°C), 200°F (93°C) or 212°F (100°C) in most conditions (select preferred temperature from the drop down above) Rebuildable - just send it back to us and we will replace the thermal actuator, spring and seals Extra OUT port can be used for a sensor, turbo oil feed line, or oil accumulator Retains stock oil filter location Oil exiting the adapter is filtered oil 6061-T6 billet aluminum construction with black MIL-A-8625 Type II anodized finish High-temp Viton seals Lifetime Warranty Made in the USA Available in -8AN, -10AN, or -12AN Dimensions Ports Includes 1x Thermostatic oil cooler adapter block 1x Gasket 2x Zinc-plated steel mounting screws 1x -8AN plug Detailed installation instructions Optional Add-Ons 2x Black anodized -8AN, -10AN, or -12AN adapter fittings with Viton O-rings 1x 1/8" NPT or M12x1.5 sensor port adapter fitting Installation Notes If equipped with a factory oil cooler, the following vehicles will require the optional factory oil cooler delete kit: 2010-2011 Chevrolet Camaro SS & ZL1: Part # 22962571-KIT 2012-2015 Chevrolet Camaro SS & ZL1: Part # HPL-1004-KIT We recommend using a straight hose end fitting for the OUT port and a 90-degree hose end fitting for the IN port. For additional clearance, use our low profile hose end fitting on the IN port (part number DO-090-08-08 (-8AN lines) or DO-090-10-08 (-10AN lines). Note only one O-ring boss adapter fitting is needed when using this low-profile hose end. Note: This oil adapter is designed for O-ring boss fittings with a straight thread length of 0.500" or less. We recommend using our fittings in order to guarantee proper fitment and seal. Applications Rear-sump LS engine oil pans with factory-style oil bypass cover 2010-2015 Camaro (V8 models) 2008-2009 Pontiac G8 LSX engine blocks Will NOT fit 4WD trucks, as the driveshaft may interterfere with the lower fitting port Optional Parts Sold Separately Sensor Port Adapters (Optional) Select a sensor adapter for an extra OUT port. Extra OUT port can be used for a sensor, turbo oil feed line, or oil accumulator. Size Part Number Qty Required 1/8" NPT OP-08-02 0-1 M12x1.5 OF-08-M12 0-1 Line Adapter Fittings (Optional) Use these fittings to adapt the ports to the line sizes listed below. These fittings are required except when using hose ends with male O-ring boss connections. Select the adapter fittings according to your oil line size (-10AN is recommended) Note: Our fittings are required to guarantee compatitility with our products, as some aftermarket fittings may cause interference and improper function. Line Size Part Number Qty Required -8AN OM-10-08 0-2 -10AN OM-10-10 0-2 -12AN OM-10-12 0-2

Price: 219 USD

Location: Orlando, Florida

End Time: 2024-09-21T01:16:13.000Z

Shipping Cost: 9.95 USD